Note: There is an updated method for patching permanently. Still you can remove patches by reflashign firmware, just in case. A2 Permanent Patching .
A2 Phones also can be patched now, Thanks to JJPatcher by den_po.
Here is a list of current A2 platform Sony Ericsson phones; K630, K660, Z750, Z770, Z780, w595, W890, W910, W980, C702, C902, C905 etc.
You can verify your phone platform from the Phone Database.
Required Downloads:
A2Uploader(latest).
JJPatcher.
USB Flash Drivers.
Install USB Drivers via ggsetup.
Copy Patcher.jar and Patcher.jad to phone.
Install Patcher.Jar
Move the application from memory card to phone memory.
Shutdown phone, Re-insert battery.
Start A2Uploader, Click Identify.
Connect phone holding C to USB Cable.
Read your phone information. Just to know more.
Disconnect, Unplug the phone. Re-Insert Battery.
Start A2uploader, click FileSystem Tool
Connect phone holding C.
Navigate to /tpa/preset/system/ams/
There you will find a file with name jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b
Copy this JAB file to your computer, Just drag and drop to desktop or computer folder.
You may now disconnect by pressing Shutdown in A2uploader.
Now drag and drop the JAB file on bpatch.exe ! It will be patched by bpatch.
If drag or drop does not work, Patch it using command line (DOS).
Upload back this patched file back to phone, back to /tpa/preset/system/ams/
Use A2uploader, connect phone via FileSystem holding C and navigate and upload using drag and drop to phone.
Close A2Uploader correctly. Via Shutdown/Close function.
Then Re-Insert battery, start your phone, Go to File Manager And then Others.
In other folder in the memory card, create a folder with name patches. card\other\patches\
Then place the patches in patches folder in Memory card. Find VKP patches for your phone, copy to notepad and save them as .vkp file
You can find lots of VKP patches at mobilefree Russia, You can use Google translator if you have problems.
You must note that this is Run Time Patching. Patches are applied dynamically during run time. If you restart your phone all patches are erased. After re-starting your phone you should run JJpatcher again from Applications. So some patches may not work properly.
Notes for w980 users and phones with no memory card slot :
The application will be installed in phone memory, you can’t have a memory card and also create the patches folder in phone\other\memory. Also The patcher given above does not work for w980. So you should use a different Patcher.jar. Download ! Thanks to Karlingen for the modified patcher.jar.
Thanks to den_po for making this possible once again.
For more guidance download the video tutorial.
Regards,
Akshay
Bhuvan.
will patches for w610i r6bc002 work on a w760i r3da028?
@smiley989
no!!!
patches are truly firmware dependent!!
so dont even dream of it
Can anyone make a patch to make the message tone length longer for w760i r3da028
@ smiley989
get your request on our support forum
How do I read files from the system/ams folder on the memory card? How do I copy them to the phone memory?
hmm, i think you missed something in tutorial. you should copy jab file from phone FS using A2uploader.
I understand. But my need is for something else. I want to copy jar files installed on the MC (as they are protected by DRM or something). Can this be done with A2uploader? It seems like only the phone memory is visible from it. Thanks.
Dear Akshayy, I have K850 with R1FA035, if I update with SEUS, it can still allowed customizing with A2 uploader or patching?. Thanks Akshayy
afsiza.
yes sure, you can still customize.
Hello!
I own a w760i and succefully patched the file and got it to upload. Got some W760 SW-R3DA028 patches for my phone but patcher.jar tells me that it is a bad vkp file! Best regards.
@ted
many patches are damaged or corrupt
better try from another place
Alright, Got like 8 patches installed but none is working! D:
Got R3DA028 and as i said jjpatcher installs them.. hm. Any idea?
I have a W910i (branded on vodafone). I am not able to copy the file jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b from the phone. I tried to drag and drop it to my desktop as well as to other locations but nothing happens. Plz help.
BR
Well at last I succeeded in copying the file the phone using a2uploader, but not by the mean of drag drop, rather by right-clicking on the file and selecting the read this file option. This option saves the file to a2uploader\ph_out folder.
Now the next problem… and I am not able to patch the extracted file (jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b) by drag n drop option but this option is not working for me, so can someone tell me how I can patch using DOS.
Anxiously waiting for a positive response.
BR
Am sorry which phone ? btw this technique really does not work on few phones. And many patches don’t work. Since its RunTime. Many things are already loaded in memory.
when i open /tpa/preset/system/ams/
i dont see any jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b
i have some .b files but not jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b
what should i do?
well which phone ?? i don’t know why you can’t find it really.
Darn, No patch is working.. I get “7 patches installed” but nothing happens.. Help me please. //Ted
Hey, For DAYS now I Have been trying to do this.. firstly how the heck can you “drag ‘n drop” the files out?? You CANT okay! I used the program you provided. You have to do it Jamal’s way. Secondly; HOW THE F*%#@ do I patch the jab3b4ded00cb34b3cc77a6699f87ac10753fa701
I Have Bpatch.exe (from another thread in another forum) but drag ‘n drop wont work and I cant work out the dos commands!
w890i R1FA035
I finally did it! I just used another a2 patcher called “a2uploaderV2 read”. 🙂
Kayde, Am sorry. don’t get frustrated. Relax. lol.
You can learn DOS commands easily. its just like cd Desktop, exit, mkdir, dir, cls, etc. Check out.
done correctly but not working in w595,shows 1 patch installed
Mate, That helped in no way.
Im trying to say that
”
Cd [folder]
bpatch jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b
”
Dose not work
And when I dragged ‘n Dropped the file onto bpatch, and placed it in my phone it says that the patches are installed. but they do nothing
will this f*** my new c902 fne
hey akkshay,i cnt copy dis ab3b4ded00cb34b3cc77a6699f87ac10753fa701.b file using A2 uploader….what shud b d problem…dis applcatn dnt allow me to drag n drop files to copy..
Quote: From user ‘Jamal’
“Well at last I succeeded in copying the file the phone using a2uploader, but not by the mean of drag drop, rather by right-clicking on the file and selecting the read this file option. This option saves the file to a2uploader\ph_out folder.”
I do exactly as the guide says, i patch the file and put it back into the phone, put patches on the memory card and i run the program
After running the program i get “Please Wait” for the longest time.
That screen does not dissapear. Nothing happens.
@kay
strange!
how much time did you wait??
I dont know.
It seems that regardless of time i wait, the screen stays like that.
I gave up and pressed cancel.
Any ideas anyone?
nope!
is seus detecting your phone?
I dont want to use SEUS.
A2 detects fine. I’ve modded the acoustics of the phone already.
how can download a2uploaderV2 read
@ mamalfeshfeshe
link is there in guide
I cannot seem to find the file jab3b4ded00cb34b3cc77a6699f87ac10753fa701.bon my phone :/ there are a lot of other .b files, but not that exact one. I would really like some help on this, as soon as possible.
@oskar
any file which matches max with this name?
try with that
Hey Akshay I really need help!…I’ve flashed my w550i and after flashing my phone is not starting-up. It is identified by setool but it is not starting. I’ve flashed it using setool. What can be the problem? Please E-mail me the solution or post it here!
@Prabhav
what is problem??
red light blinks??
screen comes up?
if red light then post it and no then re flash your phone
hey akshayy i try to copy the jab file but drag and drop doesn`t work,do you hae any ideea why?i have se w595s,branded on orange network.thx
@ alin
try on other drive
other than c:\
also u got to have admin rights
hi everybody. I’m having a problem with A2Uploader. the drag and drop doesnt work so that i cant copy the from the fone to my pc. please help
@bhuvan i need adimn rights… Which rights is he talking about?
@ mckalyster
admin rights…u need to login to windows as administrator not a simple user!
you cant drag and drop it using a2uploader guys.
All you have to do is right click the file when you see it and then click read after that go to the folder where you put the a2uploader then you can see a folder their named ph_out. if you didnt see that folder then you are using the nonupdated one. You must download the a2uploader that was given up their.
Now my problem is when I drag and drop the copied jab file to the bpatch.exe it didnt do anything it just flash and nothing happened.
can anyone tell me what am i going to do after i drag and drop it.
do i have to wait for another jabfile in some folder beside the one i copied from the phone?
Pls tell me.
Because when I try the patch after running the patcher it didnt do anything.
My phone is w910.
Ok i followed the instructions here but it doesnt work.
I tried the patch of sliding sound but it doesnt work.
senjeru
when u drag n drop jab file…then for less than a single second…a dos dialog box must appear…that means ur file is patched…nw ull have to use…that jab file only..
I already did that but still nothing happened no slide sound…
Can anyone give me a jabfile of w910 that was already patch and used to your phone(for those w910 that successfully patch their phone)
And lastly a sliding sound so that I will put it to my phone system using a2uploader.
Thankyou everyone.
senjeru
what u wanna do??
get patches working???
are other patches working?
jab file is responsible only for running jjpatcher..
may be problem with patch
Its been 3 days of reading forum still I cant find the answer on how to make it work.
I mean how to make the sliding sounds work.
I followed already the tutorial on your site but still it wont work.
The jjpatcher recognize the patches and it says that 1 patches installed or something but nothing realy works.
I tried other patches already like play logo into walkman logo but still not working.
Im loosing my hope of this…
senjeru
our work was upto getting jjpatcer running…
else…it must be problem with patch…
better get onto our forum…for that
When you say “Copy Patcher.jar and Patcher.jad to phone”, which folder do you copy it to? Also how do you install Patcher.Jar, how do you run the file on your phone? What about bpatch.exe?
nevermind, I think I understand the instructions now… So with these runtime patches, every time I shut down my phone I lost the patches? That sucks, there’s almost no point in patching your phone right now is there? Also do I need to have flashed my phone with generic main/fs to patch it with this method?
wongnog
copy them in other folder…
install from phone
wongnog
ya…u should
ull get original features…
and patching..yea…thats a big heck!
but still..that works…not that bad…as u can patch!
Hi akshayy or bhuvan I want to flash theme my k850, is that required main and fs can you show how to flash theme, may be with video tutorial if you dont mind. Thanks
Afsiza
simple…upload to the directory mentioned…
no need of havng fs or main
May I request for a video patching a w910?
Using those instructions so that I can see if where did i get wrong.. thankyou bhuvan.,,,
ei is any1 here??? can any1 give me a clear video of tutorial in patching w910 with a slide sound?
why is it when i use the vkp file from that reccomended site.. it will say bad patch, empty patch?
so as the topic, A2 phone can be patch. Can anyone tell me. Those phone can be unlocked? We just creat a unlock patch and patch to that phone. Can it be unlocked?
Duy Pham,
This is Run Time patching, so phones can’t be unlocked for now.
When we have full patching then we can unlock by patch.
awts akshay you skipped my questions…
it dont work for me. when i click on jjpatcher it says please wait and nothing happens.
Help please I followed the guide
what does the patches do
hi akshay
i have followed the tutorial exactly as it says but my patches simply aren’t working
my phone is w910 btw
tia
Hi Akshayy, I did all the steps from your instruction and got the message “** patches installed” when run jjpatcher, but nothing seems to work. What did I do wrong??
Dear Akshay,
I cannot see jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b in my phone :and there are a lot of other .b files, but not that exact one.
I am using G502 please help
SUPERB!!!!!!!
Great Patches!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Now My SE is like a nokia!!!! jaja!!!!
GREAT!
k850, they add new features to phone.
thaproxinator, answered !
for example what new features do they add to the phone
is the k850i one of the phones that i can put these patches on
I cant find jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b
I have K850i.. R1FA035
I have other like jec7blablabla or j7cblablabla .b files but not that one..
So what can I do now? 😛
they don’t seem to work well yet.
hi,i have a new C510.i want to lock the photos(camera album ) or the keypad with a password or both,is there any patch available?please do suggest one as i really do not want to share my personal pics with my roommates…………regards
@prat
look at mobilefree.ru
or jump onto our forum!!!!
I honestly can not copy the jab file to my desktop :/
Right, I’ve got it working. Though when I want to start JJPatcher on my phone it either reboots or hangs at the loading screen :/ What gives?
Capric0rn
“honestly”
lol
right click the jab file and click on read data
Capric0rn
how many patches u are trying?
sure phone hangs?
hi. i’ve got a problem, i cant drag out that jab3b4…. file from my phone 🙁
even when doin’ ctrl+c, ctrl+v i can’t copy that file..
GrYnas
right click on the file and click on read data
go to ur a2 uploader’s folder
there ull have it
omg, thanks dude, now i have it. in the first beginning i think i didn’t get the point 😀
but now.. when i’m tryin to run jjpatcher a get my phone restarted..
what should i get when i run jjpatcher? maybe phone freezed?
GrYnas
nope
in few seconds…it should appear that no of patches installed
get a single working patch for ur firmware…and test via it
i finally understood this whole thing, when i add some pathes from mobilefreeRussia forum, in jjpatcher i get message which says X patches installed, but no one of them doesn’t work…
GrYnas
which phone r u using?
and which patches?
sys gfx?
my phone is w595. yes, sysgfx (is it possible to use?). and also as i said before i tried some from mobilefreeRussia.
GrYnas
a2 patching is not that good as it is runtime not permanent
but i am using few which are working fab!
google sysgfx w595
go for se nse results…there even i am there…many sys gfx which are working ull find
ok, i’ll search 🙂 thanks for help 🙂
guys theres no file with the name jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b…there r lots of others .b files but not this one.
i am using w595 r3da026
it’s me again. look, i tried Walkman_Battery_LT_by_Radwkw patch, but i don’t know, when i run jjpatcher i get “1 patches installed” but i don’t see no changes.
sciscor
first install jjpatcher on ur phone!
GrYnas
as its runtime patching…values which are being used at that time are not patched well!
thats y this is happening
simple way out is plug in to charging
ull see the difference…later all patches will go fine
So first of all i have to charge phone to full? And then run jjpatcher? And it’ll should work fine?
no
simply apply the patch
then put on charging
for signal…dont apply…open network connection and choose an operator which u dont use…look that network will go zero
as sson as it starts to go to ddown level where ur network usually do not reach..apply the patch by opening jjpatcher!
add jjpatcher to ur activity menu….
kind of fast thing but signal will work fine
now put on charging
ull get the battery sign also!
thnx Bhuvan
i m new here…i’v been to many forums and i’v seen patches posted in boxes..so i jst wanna know how to download from there….i mean do i need to copy the whole box sumwhere?
sciscor
copy whole the coding to notepad and save as .vkp file
ok
thnx again Bhuvan
does anyone has any patches for w595 R3DA026?
I cant copy the jab file…drag and drop is not working any other way?
sciscor
i too own the same
crossflash to r3ea037 LT
there are two versions
LT and LD
if u r intrested in patching thne go fo lt
hardly no difference!!!!
but stable ppatches are there only for lt
Shoaib
right click on the file and click o read data
go to a2 uploader dir and ull find a folder
ph_out
check it
ok
but is dere any other way?
i dont want to change my firmware.
do u hav any patches for w595 r3da026?
Bpatch.exe doesn’t work for me. I open it and a box comes up, then it closes. Help?
sciscor
dude there are patches for ur firmware too bt vey less stable!!!and at gfx patches…no patches!
new firmware is alwys fixed and good…its quite fast also!
look at mobilefree.ru
Sanjeev
ya
that file it patched now
use it
Thanks!
A2 not read my phone, t700 huhuh
baongoc
install drivers
how do i know which patch to choose; do i go by firmware version or model of phone
JAMES
both!
r ther patches for t700
deepak
yea
its a2 phone
search for patches for ur firmware at
mobilefree.ru
W995 is supported or not?? i think it’s not supported. kindly confirm 🙂
lovedimpy
nope
w995 is a2v2 i guess
no a2v2 phone is supported yet!
hai im looking for z770 vkp patches
can anyone tell me
i can’t copy this file “jab3b4ded00cb34b3cc77a6699f87ac10753fa701.b” Help !! please
Sajid
why
?
and why are u going for runtime patching when permanent is there
more easy fast and stable!
Hi Bhuvan and friends I have C510 having firmware R1FA035,
I’m very new to patching so plz help me out how to patch ma C510, I have got a link for ma firmware’s patches but don’t know how to use them ,
Link is ..
http://translate.googleusercontent.com/translate_c?hl=en&sl=auto&tl=en&u=http://mobilefree.ru/newbb_plus/viewtopic.php%3Ftopic_id%3D4321&prev=hp&rurl=translate.google.co.in&usg=ALkJrhhjVymJ0fSvPMVggHrXOhWp51Ji_g
And one more thing what is the relation between the firmware of phone with the patches, I mean it is written somewhere that this patch is only for blah blah firmware…….
Thanks in advance…..
One more thing the above download links are not working for me…..
Rajneesh Gadge
yeah man
look at permanent patching guide
its easy and also more stable!
download firmware from topse.ru
yeah
patches are firmware dependent
Rajneesh Gadge
which download links?
Thanks for replying mate……I’lm posting ma queries now to Permanent Patching section.
Plz do answer those whenever u get tym bro….
i saw i website and they gave me patches in code form. do i just copy the code to notepad and save as .vkp file?
How come when I try to run jjpatcher, it says operation failed..is it supposed to say that or its not compatible with my phone?
Help…I`m using k850: ChipID:C802,EMP protocol:0401
PHONE STATE: “RETAIL”
FLASH CID: 0052
OTP LOCKED:1 CID:52 PAF:1 IMEI:35182902******** CERT:RED
LDR:2008-07-23 12:03 CXC1250843_DB31XX_CS_LOADER_ACC_SDRAM_R2A065
LDR CAPS:SYSTEM FLASH SIGNATURE AUTH
LDR:2008-07-23 12:03 CXC1250780_DB31XX_CS_LOADER_APP_SDRAM_R2A065
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
LDR:2008-05-23 12:10 CXC1250779_DB31XX_EXPLORER_LOADER_APP_SDRAM_R2A059
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
My problem is that, when the patcher ask for write data, i press yes, and then it reboot…again, again and again…i dont know what to do…please help!!!!!!!!
there some issue with k850, seems so. i will get back later, ask some body else also mean while. 🙂
hi Akshay
do u hv w910 privacy patch?
does it work for cid 53? i hav c901 cid 53 RED.. how do i copy de jab file?
by doing patching through j patcher weather i have convert certificate red to brown for w910
too lazy to read all what is writen here… so, if someone gets that “Please wait” problem with jjpatcher, just delete all comments from a patch and leave only a code of the patch.
For example we have this patch:
;j10i2 R7BA076
;Rename files with extension
;Now when rename shows full filename including extension
;v.2
;(c) IronMaster
;(p) MikaJel
147C12C0: 401B 321C
147C13B6: 86F1C2ED C046C046
147C13DA: 86F1B0ED C046C046
we have to leave code only:
147C12C0: 401B 321C
147C13B6: 86F1C2ED C046C046
147C13DA: 86F1B0ED C046C046
P.S.: sorry for my bad english…
is there any probability to crash whole phone while doing this?
Crash would be any kind of Power failure of phone / unsuccessful flash operation / GDFS corruption. What differs is the chance to revive your phone …
Hi when i open jjpatcher in my phone my W595 gets restarted why please help
what is patches actually ? i mean the function of the patches for the phone .
Worked EXACTLY….
Thanks Man.. I don’t Mind if its Temporary..
Using C902
State: Retail
Cert: Red
CID: 0052
FW: R3EG004 AO
THANKS AGAIN!!!
hey when i connect my naite phon to a2uploader for system files by holding c
it is not showing system files instead it s showing this
phone status:: “RETAIL”
flash id :: 0053
can anyone help me for getting system files
I own a w595. I think my firmware is eror. I cant acces camera and i cant recieve and snd msg. I hv tried to flash firmware using a2uploader. Bt i cant. A2uploder doesnt idetify ma fon. Pls any one help me