Tutorial to Apply Patches using JD FLasher for db2020 phones, for k530 k550 k610 k770 k790 k800 k810 and w580 w610 w660 w710 w830 w850 w880.
For New Sony Ericsson phones please check out the updated guide, for a2 uploader + jdflsher cxc patcher
If you are new to patching your phone, then please first read the Tutorial on patching with SeTool 2 lite completely, It covers the basics like GDFS backup and Other Information, here we directly take to how to apply the patches with the more advanced and faster tool JD Flasher. Using JD Flasher you can apply the Sysgrafix patches quickly !
Downloads:
Drivers,
FAR Manager,
JDFlasher plugin For FAR Manager.
All of the programs we need are included in these 2 files, so download them, unpack FAR Manager, and unpack JDFlasher to FAR’s Plugin directory (as said in its info.txt). Start FAR Manager. Press Alt+F1, and choose Just Da Flasher
Note: All Images in tutoirial are thumbnails, click to enlarge !
JD Flasher will initilizse and you get the following dialogue and you can select db2020 or q2020 as script, DCU-60 as port, and the highest, 921600 as speed.
Part 1: Applying Quick Access Patch.
IMPORTANT: If you already have applied the quick access patch then don’t apply the quick acces patch again directly jump to part 2, if you have not applied Quick access patch with db2020 script in Setool 2 lite then please apply it. Quick Access patch is applied with db2020 script and all other patches are applied with qa2020 script.
Using your phone’s main firmware create the quick access patch using qamaker.exe ! Just drag and drop your phone’s main firmware .mbn file on qamaker.exe, qamaker is located at JDFlasher\2020_52\qamaker.exe ! Start FAR Manager, hit Alt+F1, select db2020 as script, and hit jump down into a large rabbit-hole ! Then connect your phone, holding C button.
Phone will connect and you JD flasher starts.
Click or select bflash, and click yes. It will ask you to remove cable, and reinsert battery. Remove phone then click ok, and then connect the phone holding C button.
It will the db2020 bypass procedure, in the process you will be asked to remove phone and reconnect phone twice again, hence totally 3 times, and at the third time you will be asked to reflash your phone’s main. Its because main firmware is damaged during bypass, hence it has to be reflashed. On the right panel of Far Manger, navigate to the place where you have the main firmware file (mbn). Select it, and hit F5. On the dialog do not change anything, just press Enter. On the next dialog “as babe image” MUST BE selected. (and click “yeah, flash it“)
After a successful flash you get the following message. Click Ok
Now you the db2020 bypass is done we now apply the Quick-Access Patch. Navigate to the directory where you have the quick_access_XXXX_XXXXXXX.vkp file, select it and hit F5, again do not change anything on the first dialog, press Enter, and on the second “as a vkp patch” MUST BE selected.
After the quick access patch its applied you should get the following dialog !
So on the left panel we select “..” and hit Enter, then click yes.
Part 2: Applying Patches !
Start FAR Manager, press Alt+F1, select “just da flasher“. On the dialog select qa2020 as script (DCU-60 and 921600), click “jump down into a large rabbit-hole“. Connect the phone, holding C button. Select bflash and press Enter. On the right panel, navigate to the patch file(s) you want to write into the firmware. Select a vkp patch, press F5, press Enter on the first dialog, don’t change anything; and on the second, select “as vkp patch“, click “yeah, flash it“.
You can flash several vkp patches in one go, without quitting the program. Now if you’re done, flashed everything you wanted, just select “..” on the left panel and hit Enter. On the dialog click yes.
PS.: This JDFlasher can also be used to access the phone’s FS, so you can upload splash screens, sounds, flash menus and such stuff with it.
Regards !
SE flashing Team !
U are fast dude. Thanks I will try patching this tomorow.
man!!!u shud’ve made this tut earlier. i went into much hassle when patching for DB2020 wuz first released. But nevertheless, gud work. :DD
Also note that 2 dudes were concerned.XD
I appreciate the hard work of both, Akshay and Peti.
And we are going to release a video tutorial also, just a few days from now. 😉
Hey Akshay and Peti… Has anyone of you used SWF Layer v2 beta.. i mean it say its for flash lite phones but the .swl files it creates cannot be set as wallpapers or something…!?
I have tried it, and it is working. Export the swf file in SWFLayer, upload it to the Memory Stick, pictures directory, enter that in File manager. Select the file (it should have a grey orb with an f in it as icon, hit the right button (More), select Use as, and Wallpaper. It worked for me on my K550i@W610i. 😉
I guess we need a new topic for this program. 😀
No it’s not a .swf file.. it’s coming as a .swl file..! And when i tried putting the file in the Phone’s memory stick, it’s showing it as an unrecognized format and doesn’t show the option of putting it as a wallpaper…!
Man that hurt.XD
Open the swl file in SWFLayer, and hit the bottom button – Export, it exports the swl project to a single swf file, this is necessary because swf’s can’t be edited to easily, so SWFLayer uses its own filetype (swl) to save projects. 😀
When I’m applying quick access patch and come to part 2 it ask me to “Flash Main”. I’ve already appleid quick access patch successfully. please reply.
The tutorial is clear anyway. You connect the phone with DB2020 security bypass, then upload main as babe image, and then upload the quick_access patch as a vkp patch. So what is the problem here?
Thanks for reply…
I’ve followed tutorial very carefully, with my k800i. I’ve Bypass DB2020 Security, removing battery 3 times, then flash main firmware as “Babe Image” then flash .vkp of firmware. Everything is ok upto now.
But when I want to apply new patch following Tutorial Part2, I hit Alt+F1, then just da flasher…….and when reach to bflash and hit Enter it show me this message “You Should Flash Main First”. That is the problem that I can’t understand.
In part 2, you select just da flasher. On the dialog, do you select qa2020?
That’s mistake. I select db2020 instead of qa2020.
Thanks for solution.
hi akshayy..can we apply vkp paches using xs++ ??
plz reply here or mail me
As far as I know they are working on it, but the latest XS++, 3.1, is not capable of patching. Use JDFlasher.
first i applied Applying Quick Access Patch.
when i connect my fone it shows u must reflash main after patching..and once again it asks me to remove the battery for three times and it continues but i am not able to apply patches ..please help….
hey!
im trying to set some vkp patches, but i just keep getting a mesage that some bytes mismatch?
Whats wrong?
Great work guys!!
:))
After applying quick-access patch, when you select JDFlasher, you MUST use qa2020 as script.
nice bt i find FAR strange
How about explaining your problem? 😉
hey . …
i havent installed this yet …. but i’ll install it
2day in ma frnd’z comp.
the doubt is … can we remove patches using jd flasher … like in se2l ..??
if yes, then how ?
Hi,
I’ve applied quick access patches in my phone with setool2.but when i’m applying patches with FARjdflasher,it’s always show “error in line 6”..what’s wrong with these?
Do i hav to apply quick access patch again using FARjdflasher?
Please reply..
no something wrong in patch.
should work
I’ve applied the same patch using setool2 and it’s work..
I’m just curious why i canot apply it with FARjdflasher..can u help me?
Open the patch in notepad, and look for lines that should be comments, like they should have semicolon as their first character, but they don’t…
@ pratik: yes, it can, when you copy the vkp file on the phone, where it asks if you want to flash it as a vkp or babe or raw, next to vkp there is a checkbox “remove patch”.
can i apply patch on my w610?
mine is cid53(darn that SEUS)
sorry CID53 nothing can be done
lupet
After I generate a quick access patch from my .mbn, open Far.exe, press Alt+F1 and then select just da flasher (I press 0 instead of using the arrow keys), I get the following error:
http://img230.imageshack.us/img230/1825/80264336vj6.jpg
What should I do now? I dragged my .mbn file to qamaker.exe to generate a quick access patch (.vkp). As you can see I am using Far with jdflasher plugin
My phone is K800i CID 52 and my firmware (.mbn) is R8BF003.
Thanks.
i don’t know what does Pressing 0 Does
start JDF
press Alt+F1 then select JDflasher with your mouse. click it. use mouse every where. to copy instead of FS you just drag and drop the file to phone then click copy instead of hitting enter and then yeah flash it.
so all done with mouse only .. !! LOL !!
I like using keyboard better. Though I would love a TC port.:S
hey ive heard there is an update for the cid53 phone on jdflasher..so could you tell me how to access phones fs by jd flasher??
You need the newest JDFlasher, select db2020 as script, and then go to ofs directory.
JDFlasher won’t work on my phone anymore. Whenever I select bflash (after just da flasher, of course) then the phone automatically go to File Transfer mode. I do off the phone, but it suddenly turns on and file transfer mode. When I pull off usb cable, it will off back. Same problem also happen when I want to write script using setool2. What could might happen? Hardware brokendown? 🙂
Is it a DB2010 phone, like K750? When I used SEFP on a phone like that, it also turned on, it must be flashed with an ssw file before doing it.
Nope, its DB2020 k770i. Before this I use JDflasher it was ok. But now the phone is crazy, suddenly file transfer mode. I don’t know where did I screw up. Anyway Peti what do you mean by flash with ssw? What is ssw? 😛
SSW files are Breakin-Loaders, which were necessary on DB2010 CID49 phones, to access file system with FAR Manager.
Is FAR Manager (SEFP) working?
Hmm. Far Manager is working, JDflasher also doesn’t have something wrong with it. :O
Test it on my dad’s k800i, but also same problem. It turns on to file transfer mode. Help? 🙁
p/s – I saw ‘read SSW’ option under read setup in setool. Is that what you mean Peti? What might happen if I enable it?
That is something else, it has nothing to do with the current (DB2020) situation.
I say you download JDFlasher from somewhere else, try mobilefree.ru, because the working FAR Manager means that the phone is ok.
@Peti
Tried it, still file transferring mode. 🙁
Which script are you using in JDFlasher? qa2020 or db2020?
qa2020. DCU60. 921600 -_- how about changing qa2020 to db2020? Phone will damage?
The phone won’t be harmed, it never is…
Have you applied the Quick-Access Patch? (qa2020 is only working after that)
Of course I have. I applied quick access patch using setool2. Then I use FAR to apply vkp patches, because FAR is easier. It was ok at the beginning. After a while, I can’t use FAR anymore, because of the file transfer mode. Battery charged 100%, but still no use 🙁
Can you upload patces with SeTool 2? And can XS++ detect the phone?
that’s wired.
Li Syaoran…. you reflash main
and start fresh applying patches using Jdflasher. first QA then other patches.
Yes I can upload patch using setool2 (and FAR), that is 1 week ago. But now setool2 also can’t, same problem occured like using FAR, file transfer mode 🙁 XS++ can detect the phone. FSX also working on my phone. But applying patch with setool2 or FAR is… 🙁 will try Akshay’s suggestion. I’ll tell you the result later.
Mission accomplished. Reflashed main, patched quick access then other patches. I can patch again! Yay! *kiss kiss Akshay* 😀 thank you thank you thank you Akshay!! 😀
Oh, not to forget to Peti also. Thanks for helping me and being patient to a no0b like me -_- thanks so much to you both. 😀
hi my name is abu bakr i have aproblem regarding jd flasher my mobile is k810i and its erom is cid 53 i dont get the option of bf lash when i connect my phone is there some thing to do with my erom cid 53 or some thing else which i have not done please please help me out here i am waiting for your reply please answer me please
when you reply me about my problem
i need the answer know
mr akshay when i attached my k550i which i flashed to w610i i got that option b lash but when i attach my k810i i dont get the option b lash in JD FLASHER does it support phones with erom cid 53 can i change my erom to cid 52 if there is a way please please tell me because i really need to patch my k810i
my email address is [email protected] please answer my question i realy need your help because you are a expert in these things so please answer me ian waiting anxiously
You can’t downgrade CID, the newest JDFlasher supports CID 53, but no patching.
im nt able 2 use mouse………
i cant navigate 2 choose vkp file……
plz help me..
can you tell me mr peti which of supports cid 53 paching or when new version of setool is is going to come which supoorrt cid 53 and support patching got any idea or something
nothing supports cid53 patching
mohammed…!!
use keyboard to navigate then
At least not yet…
when i click on bflash it comes up with error plugins need to be fully installed or something like that/ help please?
Just to make sure: do you have drivers installed?
If yes, try to get jdflasher from somewhere else, like se-nse or topse.
ive done it and unlocked my phone but now once the screensavers finished the screen turns off for about 10 seconds then it comes back on, how can i fix this?
Maybe simox’ patch-gen didn’t generate a working patch?:O
Try to use a different unlock patch (google)
ive try dozen times to connect my phone with jdflasher..
but it wont..
y????
Drivers installed? Battery reinserted?
Hi,
I have followed all the steps on this tutorial page…
and they all have seemed successful with no errors whats-or-ever…
however, the patches do nothing to my firmware.. all the modifications that i made via the patches did not appear on the phone….
i’ve made sure the software version for the patch and the firmware i have are the same… only difference is that mine was flashed using the ‘CHINA’ firmware…. would this have anything to do with it?
NICK !! That’s a BIG mistake.
All the patches are made for GENERIC firmware.
And Not for CHINA firmware.
So now reflash your main firmware before phone crashes !!!
oppsss.. okay.. am reflashing it now….
thanks for the great tutorial and help!
also, is it possible to, say, compile several different patches into a single .vkp file and patch it all at once?
It is possible but there’s no need for it. You can flash several patches in one go with JDFlasher.
is there any way of changing the battery sign without patching???as i am having cid:53
you can’t do it. only patching can change sysgfx
can i change main firmware from china to generic firmware?
The link to the far manager is not working. Could you please upload it again. It says Bad link
“The link you clicked on is not complete.
If you clicked a link within an e-mail message, please verify that the link was not broken in the middle.
If it is broken, copy and paste the entire link into your browser.
You will be redirected to the eSnips home in a few seconds…”
@butt: you can.
@ros: strange, download then from the original site. (farmanager.com)
I am gonna patch my K790. But i have a few doubts:
1. After applying the quick access patch, may i disconnect/turn my phone on before applying patches?
2. After applying the patches, if I want to apply another patch at a later date, will I need to apply quick access patch again?
3. I have downloaded generic firmware version. my current one is asia. may i flash it with the generic?
1. not necessary.
2. no, you will have to use qa2020 script to connect.
3. you mean K790_MAIN_ASIA?:O If so, you may lose some functions, but all patches are made for generic ones.
Thanks for ur reply
Will the megabass patch replace the sysgfx for megabass icon in media player, or just the music quality be improved? If not, how to change the graphics by patch?
I ask this because there is a megabass icon built in to the k790i (R8BF003) firmware (when opened with se image tool), so that icon will replace the current one in my K790i
i have a k800i CID53 upgraded to k810i.
i understand that quick access patches are not supported on CID53.
but what about patching the MAIN filesystem image with those BEFORE writing all main flash?
is it possible? patches are patches… even if applied before or after… or not?
@Nett: Not sound quality, it’s an equalizer preset. To replace the image you’d need ARM-ASM programming.
@warezbabe: Not possible, it would fail self-check.
I get error :S
cand find decice info in xml [53red]
Guys, i have one question. How on earth do I apply this quick access path?? WHere do I find the phone firmware .mbn so I can drop it to the qamaker??? Please help!!!!
53 is not supported in this patching.
red.
you can find firmware on topse.ru
esnips.com search
seusers.com
topsony.com
4shared.com search
I follow all the procedures correctly but i get the ofs and the oflash option but no bflash, why?
bflash depends on phone CID and phone type.
can any 1 plz exlpain this briefle==>(On the right panel, navigate to the patch file(s) you want to write into the firmware. Select a vkp patch, press F5, press Enter on the first dialog)
Far has to sides.
left and right browsers.
see them…..!!
😉
i selected bflash option(m usin W710i R1JC002)buyt nothin happens it just reads as memory n down its written as o bytes in files sumthin..wat things wil i need for my phone(qap is already applied)
hey guys..wanna ask..
1.actually i didnt understand what mean by patching??
2.what is the function of patching?..
3.my phone is k550i/w610i CID 53..can i use JDFlasher??
4. does flash wallpaper work in my k550i/w610i? can give me the tutorial using JDFlasher?
5. how to change the battery signal and anythig in my phone by using JDFlasher?..teach me…
thanks..hope u’ll can help me..
famin
chill out CID53 can’t be patched for free now. wait for some time.
akshay…how can i change battery icon? i mean customize icon or anything in my phone?
akshay are you sure cid53 is not supported?
far manager/jdmanager seem to cope with CID53 phones when into the FS
patching must be supported???????????
i have k 530i CID53
otp cid 52 i want to flash it to w660i
@whats otp????
and ya
u can…with cid53 firmware of w660 from topse or check out in our file base
on my k550i@w610i wen i selected bflash it sed dat i need to flash the MAIN to continue. is this right???
is it okay to flash main firmware with XS++??
everytime i click on blflash it says dat i must flash the main agen. is dis rite??
sombody help me…why when i drop and drag main in qamaker dont work…..?
howto install sysgfx..?
i have flashed my phone thru JD flasher K530I to w660i …..(CID 53).. now i want to flash it back to K530 as i have to give the phone to service center….for repair ….so please can u tell me can i flash to K530i thru JD FLASHER …I have all the req files for K530 example ….RED53.MBN,RED53.FBN of asia _levan but what about the cust pack i am confused to use whick cust pack ??? plzz reply its urgent ……………………
you need k530 firmwares. just flash with k530 firmwares now. nothing else. and phone should get back.
custpack should match the FS ????…my FS is ASIA_LEVAN..but I am not able 2 find cust pack of CID53..can i use cust pack of cid52 of asia_levan only…….
there is no specific custpack for CID52, or 53 whatever. Its the same for all CID.
thank you …akshay .A message to all the memmber for thanking this forum helped me in flashing my phont to w660i (cid53)….it’s feel gr8…i was very happy when i crossflashed w660 to k530,,,..
thank you ……………
You are welcome. hope to see you again.
Hey akshay, i ws tryin 2 post this 2 applying patches tutorial, bt cudnt. Sumthin wrong with it?
Hi akshay! 🙂 I’ve a k530@w660 & finds the sms storage limit of 1000 msgs really nt enuf, so i found these patches at http://www.topsony.com/forum/archive/index.php/t-14176.html tellin how to increase the limit, & i applied the patch for 10000 msgs. But im unsure of keeping mor than 1000 yet, will it corrupt the main or the fs as they weren’t designed to handle that much? In myphoneexplorer, it shows the capacity as 10048 msgs, so it works i think, bt i was hopin u can giv sum info about the stability of this. 🙂
Thanks in advance!
no don’t worry. you don’t worry about color..! red is fine.
How can i change or upgrade my sonyericssonk530i phone’s
Os.And what is the maximum upgrade option.
@Shishir
os???
u can modify it…patch it…dats it
read the flashing thing…and patching care fully!
why when i patch my phone is dead?? my phone is k800i, and i flash it to k810i orange..can i use k810i vkp patch??
Please help can i apply quick access patch for w200?
@Fire2Hot
no….no patching for w200
hi,I’m trying to install elfpack onto my k810i & w660i.The problem is my phone is cid53 and SEtool don’t support it thus I can’t make quick access patch.The question is,how am I going to install the .vkp files that is included with the elfpack ?and what is quick apply pacth anyway?
p/s:I’ve downloaded and use jdflasher to upload flash themes onto my w660.
@xeroxcool
no patching for cid:53
Ohh Sugar Honey Iced Tea,that means that my k810 has to stay uncustomised.It doesn’t support flash menu either ?what kind of mod that i could do with it?
@xeroxcool
lol!
yeah!even i am having cid:53!!!i can understand the pain!!!lol
u can add fonts…change menu layout…strtup sounds n screen..acoustics cam driver…disp driver if drr is one fr ur cell!!!
does jdflasher support for w200 cid53?? plz repp.
bambu_men
i don’t know w200 is db2020.
w200 is db2010/2012 isn’ it not db2020?? so what can i use to customize my w200 with cid53? repp again :). btw thanks for repp mr. akshay
jdflasher, db2010 select some other script. that works for it.
oh i see.. i’ll try it but what script you recommend to use? just to be sure.. 🙂
@bambu_men
qa 2020
Great, Ok then, thx bhuvan for the advise. And also akshay, thx to you to. I’ll give it try aftr i’m done with my other fone..
I’ll come back if i face some eror :).
@bambu_men
sure
My phone is K800i CID 52 and my firmware (.mbn) is R8BF003.
Do I need to go though the breaking loaders step or can I apply patches (.vkp) directly ??
Should I shift to part 2 from the tutorial directly??
Please advice
lost wanderer
do as it said in tutorial
nothing else is needed for your phone
keeping in mind that your phone is not branded
cid=53 color=red platform=db2020 Phone K800i
I want to get a couple of “ELVES”,like one to be able lock my keypad and files with code 😀
But i think that as i understood i can not patch my phone… :/ right ?
@john
look at the main page’s posts
ull find there anycid patching
so u can patch cid:53
good day!! just want to ask if there is a big possibility that my phone will be brick if i apply patches on my k800 cid53 phone. and also please advice me of some of the coolest patch that i can do with my phone like the latest and best cam driver, acoustics, coolest menu pack/fonts, light effects etc coz im not updated with this things. thanx and sorry for my english!!
@amigo2008
1.) When modding there is always a really tiny chance of bricking your phone, but follow the instructions and nothing will go wrong 🙂
2.) All the things you have mentioned above come under the category of personalizing the FS. Patching = Modding the MAIN. Menu, camdriver etc can be changed without patching. One of the coolest patches is elfpacks. 🙂
@amigo2008
for latest and great stuff jump to our forum!
patching and flashing two different things!
better understand first then do something!
HELP PLEASE !
I tryied to aply a privacy patch for my phone,jdflasher poped up a mesage that says some bytes are missing,i continued,the phone was blinking white screen.
i removed it,it starts up,and after 20 seconds almost,after i enter the my PIN,and after 20 seconds my phone shuts down !and then restarts adn few sec. later the same again and again!
Hurry please,how i will retrieve my phone??(sorry im horryfied :O :'( )
@johni guess u were there at forum too!
reflash main and fs
Yes bhuvan,actually i were.
It was 3 the morning that time.
Problem occured from a bad patch about privacy.
And now is solved,i used SEUS.
I didn’t knew exactly how to re-flash main and fs…
So, a member of the forum recomended me the SEUS it took 7 min. and now everything are fine 🙂
@ john
nice
i still dont get it. what do i need to do to get Peter’s Acoustic Mod v2 on my w880 CID53. must i do anything of this posted here?
@GapY
JUST OPEN UR FS THROUGH JDFLASHER….AND UPLOAD TO
IFS\SETTINGS\ACOUSTICS
JUST REPLACE ALL THE FILES
Hi I’m Richie
I have a k530i
..Platform=DB2020..
..EROM CID: 53..
..Firmware=R8BB001..
I started with Flashing my fone to w660, but I stopped coz I couldn’t Find bflash…
Tried flashing the FS and MAIN again, but I’m still sitting with the same problem.
Richie
post only for once!
u have to flash suing oflash
bflash is used for patching
after i applied qa patch i have only bflash and bfs options.
how can i fully reflash my phone. guys i need it please
Wasi
connect using db2020 script…oflash is there…thats the way to re flash…
and if u are continuing payching process afetr applying qa…then u have to get in bflash mode…and drop firmware there
does applying the Quick Access Patch is needed for me to do, becuz im first time patching my w660 and already backup gdfs with xs++ so i dont need to backup gdfs using setool 2 lite?
hi ppl can sum1 tell me how 2 apply acoustic and camera drivers plz i hav a k550i/w610i cid 53 oh and if u hav good ones can u share them please… thank you all
Marcus, Download JDflasher, connect phone using db2020 ofs mode, or use qa2020 bfs. Enter, copy and exit.
If you already patched and flashed the phone then you will know, check videos also.
so you’re saying that i can either patch or flash them in? which way would u suggest? oh and what’s bfs about?
noooo not patch, BFS is full FS access break in access, read and write to File Sytem, BFLASH is wicked and deadly flashing by breaking into the phone’s security. Oflash is regular flashing. OFS is regular FS access.
um… ok so drivers go into ofs or bfs?
i was try the entire turorial and video patching cid 53 using jdflaser_anycid
but the last step when i am gonna flash patch file(*.vkp)there was an error warning said
“error line 1”..i am sure with every step before is right
i already insert quick_access.vkp before
my phone is w610 red 53 using r8ba024 main and r6 for fs
and i am using w610_r8ba024_***.vkp too
can you help me solved the problem…
thank’s and sorry for my english
one more if i want to flash to r6 main to my phone is necesary for me to insert quick_access_patch.vkp anymore???right now i am using r8 main and i already insert quick_access_patch.vkp to my w610 phone…thanks.
bedoel
well if u applied qa patch easily…then the problem is with the patch u are applying
and flashing main will remove qq apatch..
flashin main wont
well i have problem with the patch,some patch is able insert to my phone..but some patch is error..
i will try it again thanks for reply bhuvan n thanks for this site..
bhuvan said:flashing main will remove qq apatch..
flashin main wont
is that mean if i am flashing main from r8>r6 i must insert qa_patch.vkp again?not harmed my phone??
thanks to akshayy bhuvan n peti too
now my w610 r6 can use a patch.vkp
thanks..:>
bedoel
ya…flashing main to any version or reflashing it will remove qa patch
no..it wont harm ur phone..its like re installing os
when there is prob with patch then they must be corrupt
bedoel
enjoy!
hai i am looking for fs
w610_r6bc002_fs_apac_red53.fbn
does anyone know where the link so i can download it????please help me.
bedoel
topse.ru
while ap[pling quick access patch through db2020
there is no option of bflash
then how to aplly quick access patch
pls help
thanks bhuvan i found it
how make k810i cid 53 patch ?
help me…please somebody…..
i want patch flash….help…help….
lough
damN!
the way is in fron of u
what else can we do?
hi again guys… as u probably kno i hav a k550i cid 53 and already flashed it 2 w610… i applied qa patch 2 it but the main is r8ba024(cuz of anycid i had 2 change it) and fs is r6bc002… i want 2 change the main back 2 r6 cuz there’s more patches 4 that version… can i do that and still b able 2 patch? if yes plz tell me wat 2 do…. ill b greatful if any1 cud help
marcus
yes…u can..but ull have to apply qa patch again!
and all present patches will be removed!
So what do i hav 2 do? Jus flash in r6 main in oflash and in bflash apply qa? Wat about the rest file? Is that necessary still?
marcus
listen…when ull refl;ash ur main..ull have to carry whole procedure of patching again!
Alrite well i’ll do that later then… Thanks dude
i dont get bflasher when i conet my s500i which i have converted to w580i and by the way it is cid53 plz help me out 🙁
akashy, is it possible to apply a bflash patch ( say a unlock VKP script ) on W580i CID53 ? I have a flashed phone which is network locked and i cannot see the bflash option in jdflasher menu.
Also I am not able to apply the vkp script ( its greyed out ) through the oflash option !!!
DO I NEED to UPDATE FarManager ????
hasan, use the latest far manager, its given in tutorial.
Can i use this for transferring files in IFS like the one i use to do with XS++ ..
ive read on one of your tutorial that it is possible but whenver i started jas da flasher it only shows up the “bflash” and “bfs” what do you think would be the problem
and the reason why i want to use it is because in XS++ u cannot download the file from the phone right , eg. camdriver , etc,,…
last thing akshayy what i mean is the ofs and the oflash doesnt show up arrghh why is it so i want to use far manager so that, like what i said, i can move files just like moving files in memory card
nosremo yeah you can. !! which script do you select ? have you applied Quick Access Patch?
It isnt working, as soon as i select justdaflasher the application exits on vista? can’t anything be done about it? 🙁
Hi,could you help me to find a patch for my phone that it will vibrates when i choose a menu in the main menu,like the newest phones 🙂 ?
I have a K800 cid53 r8f003 , Peti have told me about the name of it, but i forgot it 🙁
I have a k610 flashed to w660, i want to patch it, but the options are only oflash and ofs, i don’t get bflash and bfs option, how to get my phone patched then? Thanks.
when i am using jdflaher it is not showing ” bflash” . i wanna apply patch for mega bass for K790i.. help me please…..
rajkumar.neelam
use qa2020 as ur script
using xs++,this is my hp infomation
09:09:07| Baseband ID: 9900
09:09:07| Protocol Version: 3.1
09:09:07| Phone name detected!
09:09:07|
09:09:07| Profiling SEMC phone…
09:09:07| Platform: DB2020
09:09:07| OTP CID: 51
09:09:07| EROM CID: 53
09:09:07| EROM Color: Red
09:09:07| IMEI: 3585xxxxxxxxxx
09:09:07| Phone ID: K770
09:09:07| Region: APAC
09:09:07| CDA: CDA102568/101 R8A
09:09:07| Firmware Version: R8BC004
09:09:07| EROM: R3A022
09:09:07| Ready for operation!
my problem was..to apply quick access patch..using db2020..(far manager)there is no bflash..huhu
eligator, check out jdflasher any cid patching.
bhuvan.. i tried the script qa2020 .then bflash is displaying but after selecting that no “ok” option displaying . i double click that but ” set correct directory ” error was displaying…
one more thing is i didnot applied quick access patch.. i think for that one also bflash is needed right?? i am following same procedure what u hav given…
plz help me……..
rajkumar.neelam
yea
oops last time i was worng i guess
open db2020
now open bflash
u may double click!
drag and drop qapatch
your phone is cid:53?
yes..Bhuvan my phone is CID 53 and R8BF003. i will try this again.. but what is that ” set correct directory error”??
Give me if u want to give any suggetions and precautions
rajkumar.neelam
that was because u went into wrong dir
suggestion
read every single steptwice to thrice
ull do fine!
hi akshayy when i open bflash using qa2020 i get
error: SetDirectory(setdir(setmode(doscript(run(gethello(IOusb::getblock(time exceed)))))))
pls help
shashi
damn!!!!
thats the error which i am also facing with my w580!
no cure for it yet…
i guess u too have w580.or w200!
well, same error with me, on K770i, CID53.
when I try to open bflash, i get this error:
SetDirectory(setdir(setmode(doscript(run(gethello(IOusb::getblock(time exceed)))))))
and k770 turns on.
But I have question, is it possible that I’m getting this error because I still did not transfered executor.b and run it from GAMES menu? Do I have to run executor in order to access bflash from FAR+JDF?
aca_coa
u have to transfer .b file also dude!
I know that I should transfer .b file.
But, I was curious, do I get that error while trying to enter bflash because I did not transfered .b file and executed it from GAMES menu?
aca_coa
no idea!
15:43:55| XS++ v3.1 (Darwin) Ready !
15:43:55| Executed on Microsoft Windows XP
15:44:01|
15:44:01| Attempting to open the interface…
15:44:01|
15:44:01| TURN OFF PHONE!
15:44:01| Hold ‘C’ button on phone and connect phone NOW.
15:44:01| You have 30 seconds…
15:44:01|
15:44:10| Baseband ID: 9900
15:44:10| Protocol Version: 3.1
15:44:10| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
15:44:10| …using GDFS name
15:44:10|
15:44:10| Profiling SEMC phone…
15:44:10| Platform: DB2020
15:44:10| OTP CID: 51
15:44:10| EROM CID: 52
15:44:10| EROM Color: Red
15:44:10| IMEI: 35344802xxxxxx
15:44:10| Phone ID: W580
15:44:10| Region: EUROPE_2
15:44:10| CDA: CDA102295/1 R2A
15:44:10| Firmware Version: R8BE001
15:44:10| EROM: R3A022
15:44:10| Ready for operation!
15:44:13| After making any changes with FSX
15:44:13| you must press the ‘Shutdown’ button
15:44:13|
15:44:13| Sending db2020_cid01_prodid_p3j.bin…
15:44:13| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
15:44:13| This is a PRODUCTION_ID loader
15:44:14|
15:44:14| Sending db2020_mem_patcher_cid52_r2a006.bin…
15:44:14| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
15:44:14| This is a MEM_PATCHER loader
15:44:14|
15:44:14| Sending db2020_red52_cs_r3a009.bin…
15:44:16| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
15:44:16| This is a CHIPSELECT loader
15:44:16| Activating loader…
15:44:16| Activating GDFS…
15:44:34| This loader is UNLOCKED
15:44:34| Success! CS-loader has been unlocked!
15:44:34| Please wait while XS builds a list of directories…
15:44:34| Activating filesystem
15:44:51| Device FS mapped…OK
how to get .Rest file for this version. please help me out,i realy want to have patch for ElFn
hi akshayy do i have to run executor.b before entering bflash to avoid error
shashi
ya
before entering bflash
it crack the main’s security
later u enter bflash to get the main repaired with actually repairing the security
please help me how to apply patches, i got the .Rest file but while i was patching my phone,sudenly at bflasher i got error message, and then suddenly it disconnect.
after than my W580i did not starts,
please help me my EROM: R3A022
help me…………………………….
geniusx
erom…say which cid?
and what was the error
flash ur main
if its caused due to patching..it will be rectified
Thanks Thanks Thanks..
Best Tutorial.
Will Donate
hey akshay….
i tried opening the bfs & bflash folder(qa2020 script) using JDflasher….& it gave the following error:
“found EPIUSB2
connecting…
got response
protocol: 0301 baseband: 9900
cid detect
<- cid=53 color=red platform=db2020
qhtry: 2020_prologue
run flashed loader
error: SetDirectory(setdir(setmode(doscript(run(gethello( I0usb::getblock(time exceed)))))))"
fone being used is w580i (EROM:R3A022;CID53;RED;db2020)…in the bin subfolder(inside JDflasher folder) there is no flash loader file for R3A022!!!
can any1 find a flash loader so that one cud access the bfs & bflash folder to apply patches..replies awaited !! thanks
@sashi….
wat result did u get??i mean after running executor.b were u able to enter bflash without an error?? i wanted to noe…cuz even i am gettin d same error!
napstar
dude no way!
even i am facing the same error for my w580
no cure out yet!
napstar
nope
i also got hanged there itself at the same error
i tried the same procedure on my bro’s k550@w610 cid:53
and it worked
that means we are not doing wrong
also this error is faced mainly by on w580 users
saw about 5 to 7 till date!
thats kinda bad luck!
thanks bhuvan…
btw,can this error be caused cuz i tried to access bflash witout copying executor.jar & executor.b…??
my 2nd question is…suppose i follow d procedure mentioned in the tutorials n yet i get d same error….then wil be fone became dead or not??or wat wil happen?
thanks again:)
napstar
what are u doing man!!!!!
u have to copy those files ofcourse!
and yea
if something goes wrong flashing main again will solve it
okay cool..i was jus tryin2 be sure b4 goin ahead 😛
anyway,thanks again.wil get back if i encounter any error.
see ya!
i’m having problem after removing battery 3 times. when it asked to flash the “main” first, then i clicked ok. then this picture comes http://i27.tinypic.com/54acqp.jpg
what should i do now?
sorry i forgot to mention my phn info. its k810i , cid52 red.
roni
it should keep moving!!!
try back again
ur phone must have got disconnected
hey bhuvan, for some reason ma w580i’s sound has got spoilt…i mean there is a lot of disturbance from d main speaker when i try playing any songs.& even d earphone gives the same problem.there is a lot of disturbance during calls.i jus cant hear the person on d other end..is this a hardware problem or software one??pls help…also to mention that i recently patched ma fone using jdflasher…n d sound was working absolutely fine even after that…!it jus happend all of a sudden! please help
also i forgot2mention that the disturbance is like some screeching sound! i am sure that d speakers are absolutely fine…but i dont noe where the problem lies.please help me resolve it.thanks
napstar
this is really strange!
hearing this first time
try it somewhere away from some kind of magnetic filed
like away from speakers
try other sim
first go for common steps
if nothing helps restore original acoustics
still no help then final thing is reflashing
is ur phone cid:53?
yeah dude…ma fone is CID53…n i also restored d original acoustics ..yet no change..!!!
i think i’l have to reflash…..btw, wil i need 2 flash only main or also fs to correct this problem ??
one more question is that i have patched ma fone…so does this cause ma warranty to get expired…i still have a few months left.so i thought that if reflashing wudn’t work then i’d have2send it2 sony ericsson service centre.so please tell me if the warranty gets void after patching or not…thanks a lot.
napstar
no…if ur phone was branded and u flashed it into non branded then only warranty is gone
these are all rumors!
yeah
try reflashing
ur phone is cid:53
then there is no harm in using seus also
if u reflash through a2 uploader u need fs,main and cda pack also
do one thing
open a2 uploader and go to
tpa/preset/custom
right click on the folder and click on read
all the cda pack is urs now!
ref;lash and copy all those files back
folder is created in ur a2 uploader’s dir
thanks dude…i have copied all the contents of my fone using JDflasher(including tpa/preset/custom) i could not use a2 uploader as w580i is not an a2 fone..anyway,bhuvan u forgot to tel me if i should reflash only my main or also FS ??i mean individual ones or both main & FS ??pls let me noe.
napstar
better reflash both so that company people do not have any kind of reason to show that the problem is created by user
service center guys are really worst!
n i forgot ur phone
these days my brain si totally in a2 stuff!
Please help me !
I dont have b flash button
I have this error when i flash phone frimeware…………………………………………………………………………………………………………………………………PutFiles(putfile(putfile_flash(flashbabe(header(send headererror 1B)))))
Edmunds
either firmware is corrupt or does not matches ur erom version
bflash aint there?
chose the right script?
Yes i choose right script !
Edmunds
u updated the script also?
read each step again
u must be doing some silly mistake
i dont have a bflash folder when i conect my mobile to the program.what i have to do???PLEASE TELL ME
constantinos
choose correct script
ok thanks very much bhuvan!!
my sone ericsson phone is k610i please unlock my phone mail: [email protected] imei 35463701-646729-3-65
azmy
look in the given guide
I have cid 53 red DB 2020
And i dont have bflash button ! 🙁
Can i install driver on ofs??
i had completed the flashing of k550i to w610i. now iam trying to apply patches for it .
i had choosen qa2020 and when iam pressed jump to rabbit hole it is loading and displaying a error message as ” qa2020.xml file not found” what to do ????
can anyone resolve this problem
k i downloaded the qa2020.xml and copied to jdflasher scripts .
now when iam clicking on to the bflash it is displaying time out and phone is starting
hey i got the same error that napstar had ………
but my mobile is k550i how to overcome this
plz ……….. thanks in advance
my phone cid is 53
i had tried the executor.jar but it is dispalaying operation failed
kieronn
download latest jdflasher from filebase
kieronn
reflash the whole main and fs
upload new cda pack!
now follow anycid again
HELP i cant detect my phone,did anything wrong?
phierce
whats ur phone?
and isntalled usb drivers?
check the usb connection!
Btw you can use JDFlasher + FAR to debrand via the customize_upgrade.xml trick (as per A2). Just generate the xml file and copy to the “tpa/preset/custom” area. Restart the phone, then shut it down. Then use SE update serverice to re-apply the firmware. Just tried it on my K800 and hey presto all the rubbish branding gone!
have tried applied quick access patch and pass the db2020 bypass procedure, but when try apply the quick access patch i have an error says bytes missmatch, then i click continue, after done, i disconnect the phone but the phone is dead, help please what’ is wrong, my phone is w850 and i have followed the tuts carefully
Hey! after clicking jump down into large rabbit hole and turning off the phone holding c button process. I get an error msg OpenPlugin<IOusb::open>
Hi.
I have a K550i and now with:
FLASH CID detected:53
OTP LOCKED:1 CID:51 PAF:1 IMEI:35934601318324 CERT:RED
FLASH CID:53 COLOR:RED
Model:K550i
MAPP CXC article: R6BC002 prgCXC1250747_GENERIC_NA
MAPP CXC version: R6BC002
Language Package:AMERICA_2
CDA article: CDA102743/54
CDA version: R5A
Default article: cxc1250671
Default version: R6BC002
Network LOCKED
Is there anything I can do to unlock it?
thanks
I’ve a K810i and I bought the phone in India. The firmware version I’ve is R8BA024. But, in the Cyber-shot 4shared folder, there are so many R8BA024 versions like MEDITERR, EUROPE etc. Which one should I download? I want the firmware for applying the quick access patch.
does jdflasher support cid53 patching?
i have applied qa patch to my phone k810 r8ba024 use setools.
i want to apply gfx patch, that u know, i won’t be in setools. so i use far with jdflasher and i get this error message :
setDirectory<setdir<setmode>>
can any1 tell me please, what should i do?
thx
this is the complete error message
SetDirectory(setdir(setmode(doscript(unknown command(ldr))))
akshayy, if bflash not there, can i apply quick acess in oflash?
can guide me applying patch to cid53?
regradds
current: r8ba024, need to install which firmware? any one also can?R8BA024, R6BC002 or R1KG001?
how to apply quick acess patch if no bflash/bfs?
error: putfiles<putfile_flash<flashbabe<header>>>>
unable to flash now…
need help!-regradds-sry for disturbing…
serious question,pls reply. the prob is red”52″ not supported,
now i’ve flash w610 r8ba024 main generic red53 onto my k550, must i flash fs?
can i flash w610 r8ba024 fs c asia red53? must the fs same with main? wht is fs?
and i cant find w610 cda for generic asia.
so if i flash fs c asia red53, there will be no cda for it?
pls reply
AKSHAYY, CAN I HAVE W610 CDA102568_16_R8A_ASIA?
or no need to upload cda???
or upload generic america’s cda?
i’ve flash fs c asia, now last part, no cda.
regradds
AKSHAYY,I NEED K550 R6BC002 FS CHINA RED53.MBN & its cda.
PLSPLSPLSPLS FIND IT FOR ME,I SEARCH THE WEB FOR HOURS AND I CANT FIND CDA FOR IT,FS IS IN YOUR 4SHARED FOLDER,BUT NO “”CDA”” IN THERE!!
or easier, are there chinese language pack for k550
sorry, not china, is k550 r8ba024 fs c asia red53 and its cda.
Check Out Far manager’s Link
Probably It’s a broken Link………….
i don’t have bflash. i do have oflash & ofs. i flashed my mobile k550i to w610i. My phone’s cid version is 53 red.
Gappa
yeah, like i said first downgrade the erom, then go ahead with patching! that will be much safer and easier!
😉
how to do this???
can u paste the link of tutorial??
thanks..
Gappa
yeah here u go
http://www.akshayy.com/sonyericsson/tutorials/red-light-blinking-dead-phone-anyall-cid-erom-repair-using-omnius/
Thank u very much Bhuvan…….
gappa
🙂
after me refill mbn+quick accses to first time & now i will to refill vkp other!
What me now reffil file mbn+quick acsses to second time!
hey i cant patch my k810! it’s cid53.. when i trying to patch with jd flasher or se tool phone is turning on! why??? pleace help me!!!
uhmm.. dude.. everytime i use q2020 after that,
bflash
bfs appeared right?
i click the the bflash.. then its error, my phone is turn on
its says.. SetDirectory(setdir(setmode(doscript(run(gethello(IOusb:getblock(time exceed)))))))
what will i do? to patch my phone?
hi!
i’ve applied quick access patch on my w580i using ur tut..
but after i select bfs or bflash in qa2020 mode i get an error
“setdirectory(setdir(setmode(doscript(unknown command(ldr)))))”