This tutorial discuses flashing firmware/de-branding/customization with JDflasher.
JD Flasher flasher is now full fledged flashing and patching tool. It supports db2010, db2012, db2020 flashing and patching all CIDs. PNX5230 only flashing is supported. For A2 phones check out A2uploader. You can find out about phone platform from the phone database.
You can thus perform all customizations like uploading flash menus, acoustics, walkman skins etc.
Quick Tutorial on how to use JDFlasher.
First Install USB Flash Driver.
Installing JD Flasher: Download Far Manager, either from official website or from here. Install Far manager, then copy JD Flasher folder to Plugins folder in Far Manager.
OR Download The Ready To Use JDFlasher+Far Manager !
Video Tutorial to Support This Text Tutorial. Downlaod Video
Connecting phone to JDflasher.
- Shutdown phone.
- Start Far Manger.
- Press Alt+F1, select JDflasher.
- In script, choose a phone if available else choose script as db2010/db2020.
- Speed select the max, and port is DCU-60 as always.
- Hit Jump Down Into a Large Rabbit hole.
- Reinsert battery.
- Connect phone holding C.
- Wait for Initialization.
Once you connected you will get at least 2 options and maximum of 4 options depending upon your phone and depending upon the entry script. All phones will get ofs/oflash. The four options are,
- oflash >> Regular FW Flashing Mode to flash firmware/debrand/Crossflash.
- ofs >> Usual Far Manager usage mode to upload thing to FS
- bfs >> breakin FS mode with FS read.
- bflash >> breakin FW flashing mode used for vkp and mod babe flash.
Double click the correct option to enter the correct mode of operation.
Note on Exit: In order to successfully shutdown phone and disconnect, you just move to the root by clicking … option at the top, and finally at the root folder JDflasher will ask if you want to quit. Always exit correctly, else all changes made will be lost.
- Start JDflasher.
- Connect phone to JdFlasher as said above.
- Enter oflash mode.
- On right side navigate to firmware location on computer.
- Select firmware in the right side.
- Press F5.
- Click Copy.
- Then Ensure that the option flash as babe image is selected. (babe for firmwares, mbn, fbn)
- Click “Yeah Flash it”.
- Wait for flashing of all blocks to complete.
You can flash main/fs using jdflasher. To debrand the phone flash both the main and fs. Also remember after flashing FS you need to add the CDA. Download CDA and copy them to tpa/preset/custom using ofs. If you forget to add the cda files to phone fs using ofs then you will end up getting a Configuration Error.
Ofs/Customization:
- Start Jdflasher.
- Select script.
- Connect phone as told.
- Enter ofs.
- Navigate in the file system and upload files according.
- Check out the video given, it shows uploading of files to phone file system.
- Using Ofs option you can upload flash menus, acoustics, camera drivers, skins etc
- To exit from OFS you should move to Root by clicking … ! They finally click ok and exit jdflasher.
Important NOTES:
Note db2010 users: Make sure that the REST file for your phone is present in JDflasher Rest Directory. If not just use the mkrest2.exe to make the rest file. Just Drag your MAIN MBN file on mkrest2 to get the REST file for your phone. Mkrest2 is given with JDflasher in REST folder.
Note db2020 users: If you use any of the breaking methods while using db2020 script then you will have to re flash main firmware always before exit.
- Connect phone.
- Enter Bflash.
- Navigate to patch on right side.
- Hit F5.
- Click Copy.
- Ensure the option flash as vkp is selected
- Click Yeah flash it.
- Wait for patch flash.
- Then apply more patches.
- Then Exit by moving to root.
thanks for this tutorial
for some reason i can’t access my file system :S
it says something about a set directory and bad answer
please help! 🙁
Are flash drivers installed?
im not sure – im not completely sure what they are
Then follow this: 😉
http://www.akshayy.com/sonyericsson/tutorials/installing-usb-flash-drivers/
im pretty sure i have them already cause the reason im using this in the first place is cause i updated my phone with SEUS and turned it into CID53
oh.
Then maybe this is an outdated version of JDFlasher, which does not support CID 53 yet. Then obtain the newest JDFlasher and try with it. (mobilefree.ru maybe)
its already the latest one – it detects my phone unlike the older version i also have
do you know if the battery has to be fully charged? mine was like 97% or something – im sure it wouoldn’t have made a difference but its the only thing i can think of that might be wrong..
It has to be over 40% or so. Under that it might get unstable. But that is also rare.
Now you should clearly tell what you are doing. Which buttons you click and what are selected in the comboboxes.
hi,
w810 – battery ok – phone not turning on – got the following:
RESTORATION FILE NOT PRESENT
“R4DB005_CXC1250316_GENERIC_HN”
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK
is this the tutorial to do this?
thanks
Peter
You have two options.
1. Get a REST file for your current FW (which I couldn’t fount by the way), open your phone in FAR Manager, select FLASH dir, and upload the rest file there.
2. Reflash main as it is.
Hey akshay n peti.well can i upgrade my oldest firmware w830i to the latest(to remove sum bugs like restarting n operation failed etc) without using seus as it adds cid53,what files i need can you give direct links(ps:em loser at searching :().em comp. New to this concept,plz tell in detail.moreover i wanted to add acoustics but not at the cost of a deadphone.
W830i
R1GB001prgCXC1250705_GENERIC_EAR1GB001
R3A016prgCXC1250680_EROM_DB2020
CDA102721/1R3ACXC1250714 R1GB001S_ASIA_LEVAN.help now.plz…. ..!
If you are lucky, your phone is CID 52. If not, you can find a tutorial with which you can updgrade it from 49/51 to 52.
I suggest reading the K550-W610 crossflash tutorial, it writes about the procedure pretty much. The files you need should be available at topse.ru, mobilefree.ru, sek750.extra.hu…
Umm.!u didnt get me peti,i wanted to ask that firmware available on net is KG and my is GB can i upgrade the new1.ok files i need kg main,kg fs and which custpack(should fs and custpack match).i read operation failed tut which says in last that it is better to take it 2 SE service to fix the prob in 5 min.wont it convert ph to cid53. but i wanted2 modd.(em afraid of bricking My ph,nor in a cond. 2 buy new 1,neither can live without 1.)mistake while flashin can kill my ph.?eagerly waitin 4 ur help.detailed1
Oh that… it doesn’t matter which main & fs you flash on, it has to be for w830, but that’s it.
The custpack is not firmware version dependent, only the region (ASIA_LEVAN) matters.
I don’t have files for that region, but try searching topse.ru or mobilefree.ru…
when i enter into 0fs mode it gives an error like
— wrong answer… someting
i cant understand
my phone is w610i and cid 53
plz can u help me ?
i want to add flash themes , change cam , display and sound driver.. plz help me.
hey pank.
choose your phone correctly. what is your phone ?
db2020 ?
then in the starting choose script as db2020.
yes i did that,
i detects the phone but when i enter into ofs mode it gives an error.
should i hold c button while entering into ofs mode??
ok thanks for that info.
i just now tried it on my k550@w610 CID52 its working.
so you say its not working for CID53…??
download the recovery files from here and put them in.
thanks for informing this. updating the Jdflasher download.
new one should work fine.
where is the updated Jdflasher??
Is it the same link??
JdFlasher +Far Manager///
above link??
fixed now should work. tested on k800
yes its the same download link… i updated it.
Thanx man… that worked.. 🙂
And tell me, can i copy my phones original drivers to my pc??
Wtih JDFlasher, after Quick-Acccess Patch is applied, you can. 😉
Is it possible to apply Quick-Acccess Patch to CID53 phone??
And i want to change accoustics of my phone then without Quick-Acccess Patch should i delete and copy new one instead???
hey pank you download a CID52 FS.. and extract it.
that’s the way to backup contents of FS.
CID53 firmware i don’t have them.
they are available at seusers.com
you can’t apply patches for CID53………!! so no quick access.
to change acoustics just overwrite old acoustics with new one.
http://www.akshayy.com/sonyericsson/others/extracting-an-fs/
I used jus da flasher and i can’t get bfs option..
that depends on the script and phone type.
i have said that all phones don’t get all options
hey akshay…
can u tell me which is the best display driver for W610i…
can i use w580i display driver???
if yes where can i get that?
and also best cam driver for w610i
photos in night mode sucks. even w700i photos r very good in comparision to w610i night mode.
Hey akshay AAC FORMAT is not playing on w830i oldest firmware ok if there is some bitrate settings please tell me.
Can you also give a link to a super audio converter which converts all formats into all.if no link atleast tell the name.!
I mean does walkman player 2 .0 supports aac and eaac+ ,as they say store 1000 songs in eaac+ FORMAT… Blah blah blah.
Hey A n P.reply to my ques. Atleast!
the jd flasher i installed doesnt have bfs option ……..
is there any way i can get bfs option ???
how do i make a backup of my orignal k530i sound drivers ????
i dont want to make the backup by extracting fs ……..
is der ny other way ??????????
can i use xs to do dat ??
how do i make a backup of my orignal k530
sound drivers …………..
i dont want 2 do it by xtracting fs ……….
can it be done via bfs option in jdflasher ??????
can xs be used for making backup ???
thanks
Pank .. no idea.
DEEP… as i said in tutorial… all phones won’t get all options. Read tutorial carefully.. it says what JD flasher supports for what phones right in beginning.
extracting is best method. else apply QA and then using QA use bfs. see jdflasher patching tutorial.
Rahul .. am not sure about your questions.
Hello, i’ve got a little problem with my k550i, I flashed it to w610i, but then I would to update the software via SE Update Service, and now it I’ve got the k550i firmware (with cybershot, no-walkman…), but SEtool2lite says that my phone is in w610i CID:53… So I would know if I can flash it again to w610i to get a REAL w610i ?
Thx
now just flash in w610 CID53 firmwares into that phone. that will fix everything…
for now i don’t have w610 CID53 firmwares… so sorry.
hi mr akshay your tutorial about the patching was i want to ask i have upgrade my k810i to cid 53 you know what i mean can i flash k850i firmware in it if so can you tell me where can i find the tutorial if not so when it will become available please answer my question my email address is [email protected] i am waiting for your reply
sorry mr akshay my email address is [email protected] please ans me at this email address i am waiting for your reply
well both phones are different hardware and different technologies.. so you can’t make k810 to k850.. sorry.
Hello,
I’ve got a little problem with my k550i, I flashed it to w610i, but then I would to update the software via SE Update Service, and now it I’ve got the k550i firmware (with cybershot, no-walkman…), but SEtool2lite says that my phone is in w610i CID:53… So I would know if I can flash it again to w610i to get a REAL w610i ? And if yes, how ?
Thx
If you could answer here or this forum :
http://forums.se-nse.net/index.php?showtopic=28845
Or via my e-mail adress : [email protected]
ok now just relax… there is no problem in the phone. its ok
now if you want to flash the phone to w610i you will need w610 CID53 firmwares. which i don’t have.
you have to buy CID53 w610 firmwares. or try to download them from http://www.seusers.com
you can flash the CID53 firmwares into the k550 using JDflasher.
So I can use the JDflasher to flash my phone to w610 CID53 ?
If yes with which firmware ?
http://www.seusers.com/forum/local_links.php?catid=497
R6BC002 Red 53.
download main and fs
FS which has french language.
CDA is same old one.
Main Generic ?
And what is CDA ?
And what’s about the Custom ?
That’s it, this site needs a FAQ!!
Main is the main firmware, contains the software parts. Generic means that it can be used anywhere.
CDA=Custpack, necessary for customization, contains settings, languages for example.
Well akshay i hav w830i via modding can i increase the quality of my display like more colours and brightness,what it needs patching or display drivers.tell me.!
It’s display drivers…
And where do i get them from,peti.also tell where to paste them and how and which ones are best 4 increasing colours and brightness.
It’s ifs/settings/display directory, and the filename is dispdriver0.dat.
It is hard to find w830 drivers, I could only find this:
http://www.seusers.com/foro/w830-primer-display-driver-wenstern-edition-643.html
thx Peti, you’re right for the FAQ 😀
But Akshay didn’t make it. :'( 😀
ok we will do it.. not a big deal.
actually creating another page creates problem in template
so this time this page will be hidden in page links
but the link to FAQ will be put in sidebar.
am creating that page.. .start filling it.
I also started writing a page with Sony Ericsson architectures, like K550 is DB2020 and so… But it got deleted somehow. :S
hiiiiiiiiii akshay.
i m creating a new blogsite[off course not as big as urs].IF U DONT MIND???? MAY I ADD UR WEBSITE LINK UNDER TUTORIAL CATEGORY????? coz there are very few indian sites on customizing.look at the .ru sites?????????so even i want to be a small part of it.but as an INDIAN.
please neglect if u dont like my idea….SORRY….
i’ve tried to use jdflasher but after point 7 # Click Copy.
# Then Ensure that the option flash as babe image is selected.
the option flash as a babe is grayed out so i cannot check it
tried on two k800i cid 53 phones
any ideas ???
pls help
It may be an old edition?
You must use MBN file for flashing, check if it is packed in rar/zip, if so, unpack it.
Hy Akshay!
Can you tell me please can I mode my K550i (cid53 of course) to w610 with this software W610_R8BA024_MAIN_GENERIC_NA_RED53 with that method what you wrote on this site (simply overwrite as I understood) ???
Yes, this will work all right. Overwriting is not correct though, these are not real files on the phone, so you don’t overwrite, you flash chips. 😀
Help I got this problem when I trying to flash my phone
here’s the log:
log started. plugin compiled Jan 3 2008 / 13:54:44
create session object
used script: db2020.xml
turn off the phone, hold “c” button and plug usb cable
found EPIUSB2
connecting…
got response
protocol: 0301 baseband: 9900
cid detect
<- cid=53 color=red platform=db2020
qhldr: 070703 1229 DB2020_SEMC_RECOVERY_P3N.2020_1_BLUE
<- hello: 070703 1229 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3N
cmd3c: 080108 1810 DB2020_FLASHLOADER_R2A015.2020_53_RED
<- hello: 080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
activateloader
flashID: 897E (Manufacturer: Intel)
<- OTP: status 0 locked 1 cid 51 cert 1 IMEI 35489301xxxxxx
flashing babe: K550_R6BC002_MAIN_CHINA_LI_RED53.mbn
error: PutFiles(putfile(putfile_flash(flashbabe(header(send header error 15)))))
^^ download the latest jdflasher. it works.
I am pretty sure this is latest.
http://www.4shared.com/file/46830641/a75c828/JD_Flasher_FarManager.html
Then what is SEFLASHING.extra.hu for? 😉
well that link was in the tutorial itself.
you update it.
i was lazy to find out the new links.
now seflashing.extra.hu in blue is awesome.
why not make a post saying that its now beome cool so that traffic goes high.
Hey there. I have a question.
I had a locked phone to three.
I read a a tutorial how to flash the phone and followed it. Thus I was only interesting in unlokcing it.
I downloaded main and fs firmware and flash it with setoool2lite. using a a patch file as well that I got from simlockpathgen tool when I did it on the downloaded main firmware.
all was good, but the phone sa “contact network provider, cinfiguarion error” when I started my phone later.
then I went to SE original update service and updated the phone there, so now I have cid53.
I cant use any ordinary programs to put in the downloaded firmware anymore because of cid53. is there any way I can solve this problem and flash my hpone so it works and isnt locked.
the problem with the configuration error on display has spomething to do with the CAD “custom pack” wasnt installd. beacuse there was an option I couldnt pick in xs++ tools like it said in the tutorial so I gacve up, ended in trying SE update tool and fucked it all up.
still don’t work…..giving the same error
error: PutFiles(putfile(putfile_flash(flashbabe(header(send header error 15)))))
that sucks.. no idea
can you try flashing in a w610 firmware in that phone and using some other firmware.
download jdflasher from Se-nse.net and try again.
this time don’t add the recovery files..
use only test 1 and test 2
just google search jdflasher se-nse.
badduck… you are identified as SPAM.. by the SYSTEM,
thankfully i could manually make out and retain your comment.
next time use a working email id….
now you can’t unlock that phone.
only flashing/debranding/customization.
you should now download CDA files and then copy the CDA files to correct location
basically the customize.xml and preloaded congif xml files
tpa/preset/custom
copy it using JDFlasher OFLASH option. Using Db2020 script.
phone should start.
omg still don’t work darn it…… i just want to freeing(unbrand) my K550i CID53………. 🙁
you report that to den_po in se-nse.
he will help you with new loaders.
Newest JDFlasher and share2flash.com.
Hi Akshay. When I try and copy the firmware i get the error message… “PutFiles<putfile<putfile_flash<flashbabe<header>>>>
Could you email me at [email protected] if you have a solution?
Thanks mate
Try flashing with XS++.
(sent in mail, too)
How can i install flash menus & themes on k790i?
K790 doesn’t support flash menus. So you can’t.
Also remember after flashing FS you need to add the CDA. but where i get the CDA ? my phone is k810
Try sek750.extra.hu. You can modify a CDA to a different region.
hai akshay and peti me also akshay
when i updated my phone in seus it changed into cid 53 and i am now using jd flasher which supports cid 53 which download link in your forum farmanager + jd flasher and its not working for me it detects my phone but when i ofs it it says an error set directory error or some what help please i depends on u
w200 ?? oh that’s really bad
sorry to tell you JDflasher does not has db2010 and db2012 CID53 Flash loaders.
It has only db2020 CID53 flash loaders. so your phone won’t work with JDflasher.
PutFiles<putfile_flash<flashbabe<header>>>>
Akshay plz help me out iam using k530i cid 53
i want debrand my phone to w660
help me out plzzzzzzzzzz………..
May be an error in the file. Are you trying to flash the mbn file or rar?:O
Peti, i have a problem too. im able to W580i CID 53 flash MAIN file success but when i try to flash FS to debrand i get an error Putfile(putfile(putfile_flash(flashbabe(header(send header error 1B))))
please help me.
i purchage on att and i want to debrand..
heyy akshay…i am having a big problem!!!even after searching google got no clue how to solve it!!any ways…the thing is…i am havin w580i….n i used to uplod few walkman skins in it….but few days erlier i got into a trouble…that is….after uploding few skins….i started the walkman…opned the skins option check out the new ones….bt there is no skin coming there….its only saying…skins:off!!!!!i extracted fs also….uploaded the skins from that extracted fs but didnt worked and today…neither the original skins are working nor the ones which i upload!!!!thnks in advanced!!!
@ Chan: what is the filename of your FS?
@ bhuvan: no big deal. It happened to me too. You have to delete walkman settings file. From TPA\SYSTEM\multimedia\MP if I remember correctly.
hi peti
i have a problem during flashing with jdflasher
i can’t flash firmware and also fs
plz helf me up
iam using k530i i want to debrand it to w660
the error
Putfile(putfile(putfile_flash(flashbabe(header(send header error 1B))))
W660_R8BB001_MAIN_GENERIC_FY_RED53.mbn
W660_R8BB001_FS_EUROPE_1_RED53.fbn
no idea. these days same problem with many people.
ownload some other firmwares and try.
Yeah, strange.
which file????can u tell me exactly??
ohkk ohkk!!!!its fixed by deleting the settings file
thnxx a ton!!!!
Hay…Mr. How about patching n crossflashing K750 CID 49 RED to W800, i want use R1BD001 firmware, can i use jdflasher to flashing it? How to do that? Is there must use Gslide to sliding/changing the block firmware to 344 bloks before flasing the MAIN n FS as a toturial using Phone XS? or directly flashing/using the W800 firmware n FS ?
Thanks in advance…:)
NGHDOA
Well if your phone is CID49 then use CID49 firmwares only. Any CID49 will do.
and please use XS++ to flash phone to w800.
because its CID49.
its easier using XS++
http://www.akshayy.com/sonyericsson/tutorials/flash-firmwaredebrand-with-xs/
hai akshay when i updated in seus my cid changed into 53. and my phone is w200i . i used jd flasher latest
but no use. and xs++ showing this message
before seus
21:25:07| XS++ v3.1 (Darwin) Ready !
21:25:07| Executed on Microsoft Windows XP
21:33:18|
21:33:18| Attempting to open the interface…
21:33:18|
21:33:18| TURN OFF PHONE!
21:33:18| Hold ‘C’ button on phone and connect phone NOW.
21:33:18| You have 30 seconds…
21:33:18|
21:33:24| Baseband ID: 8040
21:33:24| Protocol Version: 3.1
21:33:24| NEW SECURITY PHONE DETECTED! SWITCHING…
21:33:24| Phone name detected!
21:33:24|
21:33:24| Profiling SEMC phone…
21:33:24| Platform: DB2010
21:33:24| OTP CID: 51
21:33:24| EROM CID: 52
21:33:24| EROM Color: Red
21:33:24| IMEI: 35426901xxxxxx
21:33:24| Phone ID: W200
21:33:24| Region: S_ASIA_LEVAN
21:33:24| CDA: CDA102738/92 R1A
21:33:24| Firmware Version: R4GB001
21:33:24| EROM: n/a
21:33:24| Ready for operation!
21:33:32| After making any changes with FSX
21:33:32| you must press the ‘Shutdown’ button
21:33:38|
21:33:38| Sending db2010_db2012_cid52red_flash_r2b012.bin…
21:33:38| Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
21:33:38| This is a FLASH loader
21:33:38|
21:33:38| Sending db2010_db2012_cid52red_cs_r3b009.bin…
21:33:40| Applet ID: 070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
21:33:40| This is a CHIPSELECT loader
21:33:40| Activating loader…
21:33:40| Activating GDFS…
21:34:02| This loader is UNLOCKED
21:34:02| Success! CS-loader has been unlocked!
21:34:02| Please wait while XS builds a list of directories…
21:34:02| Activating filesystem
21:34:29| Device FS mapped…OK!
21:34:53| Uploading E:\MOBILE\SONY ERICSON\New Folder (2)\flash\Camdriver v5.0 W200\Ifs\SETTINGS\CAMERA\camdriver0.dat to /ifs/settings/camera/camdriver0.dat
21:34:53| Creating directory /ifs
21:34:53| Creating directory /ifs/settings
21:34:53| Creating directory /ifs/settings/camera
21:34:53| Deleting file /ifs/settings/camera/camdriver0.dat
21:34:53| Deleted…OK!
21:34:53| Uploading file /ifs/settings/camera/camdriver0.dat
21:34:54| Done uploading
21:35:04| Shutting down FS Services
21:35:04| Shutdown…OK
21:35:04| Disconnecting phone…
21:35:04| You may now unplug your phone.
21:35:06| FSX Shutdown!
21:35:06| Disconnected… Unplug the phone
AFTER UPDATING IN SEUS
23:26:28| XS++ v3.1 (Darwin) Ready !
23:26:28| Executed on Microsoft Windows XP
23:26:28| Attempting to open the interface…
23:26:28| TURN OFF PHONE!
23:26:28| Hold ‘C’ button on phone and connect phone NOW.
23:26:28| You have 30 seconds…
23:26:28|
23:26:32| Did not receive 0x5a. Continuing
23:26:32| Baseband ID: 8040
23:26:32| Protocol Version: 3.1
23:26:32| NEW SECURITY PHONE DETECTED! SWITCHING…
23:26:33| Phone name detected!
23:26:33|
23:26:33| Profiling SEMC phone…
23:26:33| Platform: DB2010
23:26:33| OTP CID: 51
23:26:33| EROM CID: 53
23:26:33| EROM Color: Red
23:26:33| IMEI: 35426901xxxxxx
23:26:33| Phone ID: W200
23:26:33| Region: S_ASIA_LEVAN
23:26:33| CDA: CDA102738/92 R1A
23:26:33| Firmware Version: R4JA011
23:26:33| EROM: n/a
23:26:33| Ready for operation!
23:26:35| After making any changes with FSX
23:26:35| you must press the ‘Shutdown’ button
23:26:36| Sorry, your phone is NOT SUPPORTED
23:26:36| Error: FSX failed.
23:26:36| FSX Shutdown!
23:26:38| Disconnected… Unplug the phone
23:26:41| Shutting down…
after seus
XS++ doesn’t support CID53 phones, JDFlasher does, though I’m not sure about w200 CID53… give it a try.
will the upcoming version of xs++ support db2010 w200 cid 53
what is roadies battle ground
No one knows if it will support it or not.
roadies battle ground???
Hey this is no place to talk about ROADIES Battleground.
LOL !!
See MTV Website not Sony Ericsson Flashing.
I also don’t know about it, nor will i ever participate in that.
i want W610_R6BC002_FS_MEDITERR_RED53 plzzzzzzzzzzzzzzzz
you can get that from
http://www.seusers.com
hmmmmmm sorry. I don’t think for free.
you will get it at http://www.share2flash.com
for free.
Correctly. I talked to justme, seusers admin, and he explained why you have to pay for them… he was right, they deserve 2 euros… though I prefer to use share2flash.XD
i just found why i always get error: PutFiles(putfile(putfile_flash(flashbabe(header(send header error 15)))))
because the firmware is corrupt. i just check using babeck. and got this error
db2020 cid 53 red
full hash
number of blocks: 241 (0xF1)
error! size of superblock doesn’t match a hdr value
1st block addr: 0xFFFFFFFF
1st block size: 0x10000
Can some can get me
W580_R8BE001_FS_APAC_RED53.fbn
W580_R8BE001_FS_MAIN_RED53.fbn
i already download from 3 diffrence website. topsony share2flash and another. and all is the same corrupt or damage CID53 firmware.
im looking for W580i CID53 im trying to put my phone in to chinese and write chinese.
Akshay can you help me? please
Can someone can someone tell me where can i get W580_R8BE001_FS_APAC_RED53
W580_R8BE001_MAIN_APAC_RED53
i try to download from several website and the firmware is corrupt i cannot flash with JDFlasher still getting PutFiles(putfile(putfile_flash(flashbabe(header(send header error 15))))). please anyone can help?
thank you
Chan. you can download them from topse.ru
or from this place.
here are few
http://forums.se-nse.net/index.php?showtopic=28828
you will also find them in topse.ru
use the english registration page and then check email and click links in email
then download from download section.
I have a big problem. I have W880 orange branded & unlocked. Previously I had the R6xxx firmware with CID51 (I think)..I updated my phone firmware to the latest R8BA024 via SEUS, and now I have CID53. I know I can’t unlock my phone yet, but I really want to debrand it for free…I’ve tried with jd flasher but I think the flash files were corrupted (checked them with babeck and gave me an error)..where I can find some good flash files ? Tried share4flash and other few websites but no luck…PLZ help me with some W880 cid53 flash files (main+fs)..really need them…
Sorry, wanted to say branded & locked (on orange)
Try topse.ru and se-nse.com.
Or try seusers.com and download from there, but it will cost some euros.
well topse.ru
and also this place.
http://www.topse.ru/firmwares/
and this is best bet.
http://forums.se-nse.net/index.php?showtopic=28828
i’ve try to using XS++ v3.1 but error wait for long time at log said “Finishing Flash…” (I’m flashing main,fs,cda in 1 step) Finishing main NOT DONE n process didn’t go to next step(flashing fs). Is there must be one by one step to flashing with XS++ (k750i CID 49 to w800 CID 49 R1BD001)? Next i’m using setool2lite11 the error said Can’t load rest file (like this ‘R1BD001_CXC1250092_EU_1_CA’ i’m forget to save the log) but finisning done n go flashing main till complete at CDA but i’m not sure it a good process because was said some error at processing main..i try to using jdflasher (choose bflash as your tutorial but the error at flasinh main on finishing to, the error was : PutFiles(putfile(putfile_flash(flashbabe(get89data(bad 89header))))) . I want to try flashing using jdflasher coz i’m never try flashing using it but i can’t understand about the error. Can u give me the rest file of R1BD001_CXC1250092_EU_1_CA ? n what the best flasher to use (XS++,SeTools2Lite,jdflasher) ? Please give me explanation…
Thanks before in advance…
i’ve try to using XS++ v3.1 but error wait for long time at log said “Finishing Flash…” (I’m flashing main,fs,cda in 1 step) Finishing main NOT DONE n process didn’t go to next step(flashing fs). Is there must be one by one step to flashing with XS++ (k750i CID 49 to w800 CID 49 R1BD001)? Next i’m using setool2lite11 the error said Can’t load rest file (like this ‘R1BD001_CXC1250092_EU_1_CA’ i’m forget to save the log) but finisning done n go flashing main till complete at CDA but i’m not sure it a good process because was said some error at processing main..i try to using jdflasher (choose bflash as your tutorial but the error at flasing main on finishing too, the error was : PutFiles(putfile(putfile_flash(flashbabe(get89data(bad 89header))))) . I want to try flashing using jdflasher coz i’m never try flashing using it but i can’t understand about the error. Can u give me the rest file of R1BD001_CXC1250092_EU_1_CA ? n what the best flasher to use (XS++,SeTools2Lite,jdflasher) ? Please give me explanation…
Thanks before in advance…
I have crossflashed two K750s to W800, both were like this, don’t worry. Use XS++ to flash and click stop at finishing flash. They are both working fine.
I was also looking for R1BD001 (W800) REST file, but no success. :S I think SEUSERS.com may have it.
i want to change k790i’s mediaplayer skin.I want to turn it into walkman. What should I do?
You have to create a SYSGFX patch with Magister’s BD2020 ImageTool. You can find tutorial on this site to create and to apply a patch like that.
An k550im is(db2020 cid 53).when I would make the telephone join to the program issues it with a sick-note:
“OpenPlugin(connecttophone(getcid(cant find device info in xml (53red)))”
What should I do?:(
Do you reinsert the battery?
dani, jdflasher is not installed properly.
do it…………………
because jdflasher is not able to find correct script.
the script is db2020 cid53.
db2020.xml should be present in there.
With a what kind of button I know it változtatni?(db2020-ra)Mert the I can jump between the characteristics only with a button downwards.I cannot modify them.it how is needed?
Apology for the idiotic question.
i did not understand you.
can you ask again ?? please.
select db2020 script and max speed. and go.
How let me position it the db 2020? My gender db 2012 ointments who and I cannot modify it.How let me modify it?
Are you Hungarian by any chance?
K550im is DB2020. Download JDFlasher and its DB2020 archives from seflashing.extra.hu. (I uploaded the newest available.) Use that.
yes,I’m Hungarian. After I open it JDflasher throws a window out.I cannot place it in on the window there the db 2020 the db instead of 2012.How I can portray it?
Me is Magyar vagy?
Mod:Te…?
// szerinted? 😀 imádnék most magyarul beszélni de az oldal angol. az seflashing.extra.hu magyar részén lehet. 😉
So as I said, download the JDFlasher packages from seflashing.extra.hu and use them, they are working.
Where is the Hungarian part of the side? I only English topics láttam.
hiiiiii and a warm hug 2 akshayy n peti both!!!
any ways my problem is….i am having w580i with cid:53….so only jd flasher helps me in uploading stuff 2 file system….now d problem which arises is this that when ever i copy a file or rename a file of my fs…..jd flasher says””DONT KNOW HOW TO READ THE FILE””….n the dialog box appears fr less then a second!!!!
thnkss in advanced!!!!
tc
Hi friends i just wanna share some thing which i noticed may be it’s known but still i flashed my K550@W610 back to K550 doing every thing and my phone became brand new but in bluetooth device list old list were still there none of other things remained just thought you would like to know
@Dani: seflashing.extra.hu is our forum. Please don’t use both languages here, only English.
@bhuvan: not hard to see why. Downloading files from FS with JDFlasher is only possible on CID52 after Quick-Access patch. On CID 53 there is no such things, so you can’t copy stuff to pc from it. For a few months from now, it will be possible then. Renaming is that JDFlasher doesn’t know which command to send… so I’d love to help, but not possible yet.
@SASHI: so GDFS stores them, as well as tasks. Strange, tasks erase when you reflash… 😀
I wrote on the seflashing.extra.hu in Hungarian.
Hi peti pls suggest me a cam driver which is currently the best around. I an not afraid to try extreme cam drivers
Well it is very hard to find a good driver, I could never do it. 😀
The original K550 driver has very good colors but bad quality. I had a great cam driver with wrong colors. Now I switched to Number1 3.0 cam driver. It seems pretty good, give it a try.
from where i can get this cam driver no13
It took a while to find it….
http://forums.se-nse.net/index.php?showtopic=19693
I know this has been asked -in part- a million times but I just got my K550i yesterday and really want to do the K550i@W610 thing with it.
The phone is CID53 – Wish I hadn’t done the SEUS:(
I’m worried about not having a backup of the GDFS because I want to be able to get back to a nice’n’fresh K550i if I screw up any flashing.
Can JDFlasher now backup a CID53 GDFS?
Can I just say also, I had no idea there was such a healthy phone modding scene and both Akshay and Peti, you are top class.
Manndaar seems to think CID53 GDFS Backup is possible. Link here –> http://manndaar.freeforums.org/erom-repair-gdps-back-up-restoration-t10.html
The ‘FLASH’ part of his tutorial freeks me out a little.
Jdflasher can’t backup anything
its ok not a big deal….. nothing to worry.
Do you think it’s a good idea to go ‘w610’ firmware without a GDFS backup?
yeah no problem.
but you don’t do wrong things…
and not to worry people do wrong things only on SeTool 2lite.
its impossible to do wrong things in jdflasher.
W610_R6BC002_MAIN_GENERIC_NA_RED53.rar and W610_R6BC002_FS_EUROPE_4_RED53.rar. What kind of custom pack is needed?
Measured you ask the same one at twice?
obviously use any EUROPE 4 CDA
just see in the CDA name.. it will be long but it will have europe 4 in it.
and what’s all the drama, batman..
you got 2 identities ? like all super heroes..
first you are dani, then you need to save the world/or your phone so you become batman.. LOL !!
Apology but I may not have omitted it jogy let me talk with myself.:))
I and batman…xD
LOL it was cool, entertainment here.
@Akshayy,i flashed z310 cid52 with R1JC002 main & FS.but it seems,network lokd still!how can i unlock that…&where2 get custpack for R1JC002…Plz help man 🙂
sorry that phone is not supported for unlocking .
wait for db2010 or db2012 CID52 free patching
can i flashing my k850?
i can’t select “as a babe image”…. help!!!
ash.. wait for some more time.
k850 free flashing will be implemented.
ELROL.
hmm may be the firmware is not a babe image.
or try to use keyborad carefully.
or the mouse..
strange you can’t select it..
what are you actually trying to do ?
i have a W580I CID53 but i have no idea what firmware to use to debrand it:S could someone please help me out? [email protected]
i have a w580 CID 53 and i was following the tutorial:
Connect phone
Enter oflash mode.
On right side navigate to firmware location on computer.
Select firmware in the right side.
Press F5.
Click Copy.
Then Ensure that the option flash as babe image is selected.
here, the option flash as a babe can’t be selected…. why could that be?
Matt Tilley
You should use GENERIC CID53 Firmware to de-brand.
May be the flash as babe image is selected as default and can’t be changed.
just check it out once.
If so then just continue.
Post a screenshot.. let me see.. what’s the problem there with you.
When i flashed i had all options open.
I had to send my W580i in for warranty repair recently. Before that time, the firmware on the phone was a CID52 variety and I could easily flash it/debrand it with another CID52 variety. However, since I sent it in, it is now a CID53. My question is can I flash it back to a debranded CID52 from the now CID53 version. I want to do this because I have tons of patches and such made specifically for the CID52.
No, you can’t, CID can’t be downgraded.
The other thing I heard is that in order to debrand a CID53 phone using JDFlasher, the phone must first be unlocked. Is this true. My phone is currently locked with AT&T/Cingular and I never had problems before when it was CID52, I was wondering if something has changed.
Scott – No, the CID53 W580 doesn’t have to be unlocked in order to debrand with JDFlasher.
Yes, Scott, Alvin is right, besides, it can’t be patch-unlocked yet… (so no free unlocking at the moment)
Hi ppl, I’m new to these things and could use some help, I have a w380 and I’m trying to apply a camera mod, I installed the usb driver and followed the tutorial, but when I try to acess/ enter / wtv (bad english here) the ofs I get this message after all the loading:
“GetFindData<getdir<send89data<IOusb::dcu_WriteData>>>>”
where did I screw up? D:
Maybe used a bad script. But for beginners, I suggest using XS++ FSX. 😉
I would, but my phone is cid53, XS++ can’t handle that yet can it?
thanks for the supor anyway 🙂
suport* xO
Does it happen that the phone just disconnects from the pc when you use MyPhoneExplorer? Due to bad cable?
why cant i log in @ share2flash?i reinstalled xp,but explorer says “the page cant be displayed”…:( whats the problem guys?can ne1 tell me?
The problem is that you don’t use Mozilla Firefox. Also your internet connection may not be ok.
Actually I never used MyPhoneExplorer ._.
I’m sure it isn’t a bad script because I used DBCIDExplorer so I could figure that my phone is pnx5230 CID53, it lists the folders and everything when I access ofs but then after the popup question “warning: are you sure?” it just stays on the “Preparing files list” forever and then gives me that time exceeded error “GetFindData<getdir<send89data<IOusb::dcu_WriteData>>>”
(I forgot the time exceed part in the other post o\)
So, maybe I just screw up when installing the driver (I tried with SEUS too, same result), or just a noob mistake like “you have to have MyPhoneExplorer installed dumbass! D<”
but it can’t be the cable, it has 3 days of life the little one ._.
“GetFindData<getdir<send89data<IOusb::dcu_WriteData >>”**
yeah, I didn’t forget, it got vanished u_u
Ok, I give up, but I swear I typed a “<time exceed” after the WriteData o___o
I don’t get it either, it is supported by JDFlasher. Is it the newest release?
Yes, as far as I know.
I downloaded it from this tut. ;/
I’ll try to do it on another pc to see what happens.
Solved, I don’t know how but it works now o__o
Thanks for the attention and sorry for all the trouble ._.
at step 7 it says, `Click Copy. ` but when i click copy it says `error can´t read the file`…:S?
Hi,
I am trying to debrand my w580i with CID53. I got last week from AT&T. I am following the tutorial above for JDflasher. It says to add the CDA. What is “CDA”? Can I still debrand this phone after so many reported problems? Thanks
@Ivarr: copy from PC to phone, not in reverse.
@Diggid: You can. CDA (aka custpack) is the name of a few files you must upload after the phone’s fs is flashed. The most important of them is customize.xml. You get “Configuration Error” is you don’t upload them.
Thanks Peti. Where can I downloads these CDA files?
@DiggiD. Check out the download section of akshayy.com. There u will get the names of the sites where u can download ur CDA
is it true that you can also patch k700i FW? how should i do that? when i buy my k700i last 2006 i didn’t notice any USB cable with it. i also have another question but it’s out of topic. I’ve downloaded some screensavers and save it on my k800i phone but it isn’t moving. gif files are suppose to be animated right? so what seems to be the problem with my phone. i’ve noticed that the only gif files that are animated in my phone are the preinstalled gif files. somebody please help me!! btw my phone is CID53.
hey man i got cid 53 can u explain me the rules so my phone dont fuk plz thank u cause my friend had cid53 and after all the warnings u put he flashed is phone the screen is white so i dont want that to happen to mine cause im more mature lol
how do you flash the CDA after you have flashed the FS
Amigo
For CID53 you can’t apply patches.
No k800 has gif support. Please check.
K550i Rox.
Just follow this tutorial its all safe
Jh.
Download the CDA files. Copy all the contents of CDA to tpa/preset/custom using OFS. that’s all.
this is how you falsh CDA.
helloo
i have problem
i have sony ericsson k550i
but i cant do games and aplications
than is sais
” bewerking is mislukt”
in dutch then
butt i have tried everything a friend of my said
flash it
but how i have just updated to newest firmware using SEUS
PLZZZ HELP ME
Updating with SEUS was a huge mistake. Anyway, follow this tutorial, it will help.
Get W610 CID 53 firmwares (main & fs) from topse.ru, share2flash.com or any place. Use them to flash your phone.
hi, i have a cid53 k810i
i can flash main+fs alright, but when i try to get into the “ofs”, it wont let me access the directory giving me errors like “time exceed” “bad 89data” and other weird errors..
so i can just do the main cause thats all i want to do and like can i use xs++ or do i have to use other one
and also wondering can i use the one i downloaded from the xs++ tutorial the main folder W610_R6BC002_MAIN_GENERIC_NA_RED5
@alex: strange and shouldn’t happen. Did you try only once? Try again, if still not working, you can try connecting with 2+5 instead of C.
@k550i rox: you can only use JDFlasher on CID53, firmwares must be RED53.
ok after trying a few more times, i was able to copy the custpack onto it…
now when it turn it on it stays white and vibrates twice. im sure its the erom…
is there any way to fix erom on cid53
No, no way with free tools. :S
Then try flashing a different main and fs on the phone.
oh i fixed mine with seus the applications and games problem is because u pulled ur phone off the cable while downloading to it which damges the gdfs seus formats gdfs and updates
i went fuk it and tried the to flash with xs++ main works perfectly cid53 dont mean shiot now i think its updated but i did not do custom pak or fs
can anyone plz give me links to get the fs and custom paks plus main plz thanx
@rox: xs++ doesn’t support flashing CID53 phones, SEUS was a big mistake.
@guru: do you know what the word guru means? I guess not. Why not check out the download page?
wheres that and also is there a english video on how to do this i opend jd flasher and mate this is a very confusing cmd program
Look at the first line of the page, Home – Download – Contact – About.
We only have video of FAR Manager-SEFP.
k550i rox
how can i play games and applications again ?
You can move them to memory stick. Then reflash main and fs and custpack. Then from memory stick, get “jar” files, they are in the hidden System folder. Save that folder to pc and delete it. Install the jar files, move to mem stick and restore the system dir from pc. It may work, this is your only chance.
use seus in case something wrong happens to your phone!
I want to put flash menu in k770i with CID53. that I will make him?
@aaa: NEVER EVER USE SEUS!!! (on DB2020 and 2012)
@tasos: no matter what CID you have, you can’t put flash menus on a K770, it doesn’t support them.
@Peti:here it shows that you become
http://www.youtube.com/watch?v=DE30wjewwBw
Then try this:
http://blog.quantifly.com/?p=7
@peti:xs++they is not compatible with CID53
and said to me that jdflasher they is compatible with CID 53 but I do not know how him I make.
if it knows somebody help me. thanks
Are you using google translator to speak in English??
Use JDFlasher to perform everything in the tutorial (there they use fsx…).
peti, can u at least the name of that font….
I m not gettin it in seusers, I’ll search somewhere else!
Are you looking for the font that SE uses for Cyber-Shot? Man, my memory has its limits, so when talking about your earlier posts, try to post to the same place, so that I can read the earlier post too…
It is called SONY SKETCH font, it is available at seusers.com.
ok my phone is a w300 db 2010 cid 49 and everytime i drag my fs onto the mkrest thing it just comes on and come off like instantly and it doesn’t make the rest file
Copy that file to the dir of mkrest. Also try command line.
how do u start jd flasher:S
Start JDflasher.
Connect phone to JdFlasher as said above.
Enter oflash mode.
dont understand these steps:s
Start FAR Manager and press Alt+F1, then select it.
My Phone is K810Ii and its a firmware is CID 53, I have deleted the menu.ml file and i couldn’t replace it back using JD flasher. While copying it shows the file in the left side, but once i reconnect and check it the file menu.ml is not there and i receive configuration error. Please help me..
The easiest way is to reflash FS. But still very strange, you connect to the phone, ofs, tpa/preset/system/menu. There you go to the other panel, select your menu.ml, press F5. Go back to the other panel, hit ‘..’ till it asks “are you sure”, hit yes. Did you do this?
I tried to copy ad you said, but even the status of copying in shown, but still same problem. Could you please upload a demo video if possible. And even i tried flashing, but even it shows some error. Please help me
I have finally flashed the mobile with the service center. Is it possible to convert CID53 to CID52 by flashing the CID52 Firmware in the Phone with CID53
once uv flashed to a new CID, i think its impossible to ever go back to the old cid ( remember, until new solutions are found NEVER FLASH TO CID53!!!!!!) sorry
Yes, Manz, that is correct. But he said he had CID53 at the first place.
ive got a problem,
i cant connect my phone to jdflasher..
i own a w350i,
on the instructions of jdflsher, it says to press c while connecting usb,
but when i do it, it just turns on the phone..
any ideas?
thnx..
oh yeah, forgot, i used db2020..
It’s pnx5230, try downloading JDFlasher from se-nse.
ok.. i tried with pnx5230, and still no luck..
and i already downloaded 3 version of jdflasher..
the newest one i think was
FAR manager for all DB2010,DB2012,DB2020,PNX5230 up to CID53
at seusers.com
and btw, the c button for w350i is also the on button..
(dont know if that helps)
i found it..
for W350i, to get in flash mode, u have to press 2 not c..
ok.. thnx for the help earlier.. but i have another problem..
how comes the flash menu’s i downloaded, dosent have a menu.ml?
it just have. .thm ._desktop, and some other images.
(and flashing cid 53 phones with new themes wont brick my phone or anything right?)
*(flashing cid 53 phones with new flash menus wont brick my phone or anything right?)
Flash menus should consist of thm and swf files. Why would it brick the phone…
sori for the noob quest..
cause i read in some tutorials that i cant flash cid 53..
so i was just curious..
so, where do i put the files using jdflasher?
nvm peti.. i found the answer.. thnx alot for ur time and cooperation..
just one tiny quest before i stop bothering u.. hehe..
can i flash my acoustic drivers, camera drivers and fonts? i mean, is my phone compatible to do so?
if so, what type of drivers can i flash them with?
On right side navigate to firmware location on computer. I dont get this bit
The firmwire is saved in my documents
My documents isnt there
:S:S
@azim: you can install drivers, acoustics are only architecture (DB) dependent, fonts are ttf files, all do, camera is phone dependent.\Documents… or move it to somewhere else.
@sagar: C:\Documents and Settings\
what do you mean by architecture (DB) dependent?
and about the camera, in w350i, i cant take videos.. (thats how the phone is) just pictures, so is there anyway to change that?
thnx peti, ur really a big help..
oh yeah, one more thing.. how bout startup and shutdown animations.. i can change that too right?
Like all DB2020 phones can use any DB2020 acoustics.
I don’t think there’s a way.
tpa/preset/system/settings.
ok..
now i got a couple of things cleared..
thnx for the big help..
can i have s500i firmwire coz mine went rong
We don’t have firmwares. Only topse.ru, seusers.com and such sites do. I suggest crossflashing to W580, by the way. 😉
I have a w580i\CID53. Im just trying to debrand my phone so I can put flash themes on it and experience a “debranded” phone. I have the latest JDflasher but after I get to the part where I have to click on “oflash” part, it loads something then gives me an error :
SetDirectory<setdir<setmode<doscript<cmd3c<hdr<cmd3cbody>>>>>>>
Im stuck at this point.
Maybe too old JDFlasher, download newer.
I am completely novice. I got w580i from ATT last week (CID53?) and want to debrand so i can use with Tmobile and in europe when i resturn back.
Can you please make guide friendly for layman like me? I try to follow your guide I download far & flasher and able to run it but get stuck. I not able to find firmware? Where can i get it for my phone?
Please help.
– Jacques
I Am Getting PUTFILE ERROR
@Jacques: What you want is unlocking. If the phone is CID53, it is not possible for free. Check EROM CID by connecting to XS++.
@zeewa: It means bad firmware.
Thanks Peti. I got unlock. I also wish to remove ATT stuff too… I think you said i can downgrade to cid52… can this be done?
This is XS++ give me:
11:57:48| XS++ v3.1 (Darwin) Ready !
11:57:48| Executed on Microsoft Windows 2000
11:57:57|
11:57:57| Attempting to open the interface…
11:57:57|
11:57:57| TURN OFF PHONE!
11:57:57| Hold ‘C’ button on phone and connect phone NOW.
11:57:57| You have 30 seconds…
11:57:57|
11:58:05| Baseband ID: 9900
11:58:05| Protocol Version: 3.1
11:58:05| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
11:58:05| …using GDFS name
11:58:05|
11:58:05| Profiling SEMC phone…
11:58:05| Platform: DB2020
11:58:05| OTP CID: 51
11:58:05| EROM CID: 53
11:58:05| EROM Color: Red
11:58:05| IMEI: 35256002xxxxxx
11:58:05| Phone ID: W580
11:58:05| Region: CINGULAR
11:58:05| CDA: CDA102774/102 R25A
11:58:05| Firmware Version: R8BE001
11:58:05| EROM: R3A022
11:58:05| Ready for operation!
Peti – i mean to ask can i debrand phone?
unlock=use with any SIM; debrand=~remove ATT stuff.
That is CID 53, can’t be downgraded. Unlocking isn’t possible, debranding is. 😉
cid53 can change to cid52 or not?
Can’t. CID can’t be downgraded.
where i can get update to add cid53 in jd flasher?
Download it from SE-lifestyle.com forum.
hi, i just followed the instructions and finished flashing my phone. BUT, when i start up my phone it gets stuck at around 90% on the please wait screen. how long does this process usually take?
it is still stuck, its been over 30 minutes. should i re-flash it?
sorry for all the posts..
i decided to just turn off my phone and turn it back on, and it worked. does that mean the flash worked? and will i have any problems in the future?
If it doesn’t complain about configuration error, it is fine. 😉
Thanks Peti.
I purchase unlock code from ebay. it work good. Now I want to do remove ATT stuff. So i am have to debrand. I understand that.
Where can i find firmware? I search se lifestyle but cannot find it.
Can you also please also instruct me how to debrand step by step. I download far+jd flash. I able to follow this guide but get stuck at firmware because i cannot find it. also how do i run jdflasher from far?
– Jacques.
plez help….
when i hit Alt+F1 and choose just da flasher, error come out
“File and archive manager”
“File and archive manager has countered a problem and needs to close. We are sorry for the inconvenience.”
what i have to do?
@Jacques: We don’t have firmwares, use google, 4shared, topse.ru, seusers.com, se-nse.net.
You just flash a new main fw and fs; then custpack.
JDFlasher is a plugin of FAR Manager.
@duan: delete FAR and download again… is it Vista? 😮
Thanks Peti…
I am confused. I will try to understand far. what is fs?
FS is filesystem, set of files that the phone uses.
Hi Akshay,… your tutorials are really useful.
Thanks.
I flashed my K550 – CID 53 with main-W610_R8BA024_MAIN_GENERIC_NA_RED53.mbn.
got swf support and Walkman.
Now please clear my doubts:
1. What are the advantages of flashing FS?
can I use “W610_R6BC002_FS_EUROPE_4_RED53.fbn”
2. How can I add flash menus?
3. I wanna change my acoustic and camera drivers, so that I can get better low frequency response( deep and powerful bass) and good frame rates . How can I do this? (on my CID53 K550 @ w610). Where can I get these stuffs?
can i use the drivers for CID 52?
Thanks once more Peti. I now am seeing more information on ths website and am start to understand little bit. I will read more and then see what make sense. Thanks lot for your help.
i have k550 cid53 R6bc002, i intend to cross flash to w610, and i got:
W610_R6BC002_MAIN_GENERIC_NA_RED53
W610_R6BC002_FS_RUSSIA_RED53
W610i_HB1-06_Gen_CDA102568_202_R2A_GENERIC_APAC
should it be ok if i use russian fs? coz i cant find apac fs.
once more, can u provide me short tutorial on cross flashing k550@w610 using jd flasher?
here’s my emil [email protected]
thx in advance
@kochu: 1. You’ll have some walkman skins and flash menus, new drivers.
2. That is written in the crossflashing tut.
3. Also there.
Don’t use own_custpack, just upload to FS with JD. “CID 52 drivers” will work. There are some in SE-lifestyle.com filebase.
@rudy: They will work, it doesn’t matter if you use English language.
thx Peti, i’m gonna learn more before doing it.
Also,do u hv link on how to back up gdfs using jdflasher?
Thx again,
GDFS can’t be backed up with JDFlasher.
Ooops,then cid53 users can’t back up gdfs?
Is there any software
to backup cid53 gdfs?
No, there is no such thing yet. Maybe the new PhoneXS will support it.
Hi Peti, thanx…
Changed acoustic driver and changed the phone font….
Now things r getting cool…
I will try to customize every bit of my phone…
But still my FS is old K550.
I have confusion because in flashing FS …
Flashing CID 53 FS and leaving with out a cust pack can spoil things (according to the tutorial)
is this true?
what is ur openion…?
what is next…?
im going to change cam driver…
Upload a custpack after flashing FS. That’s all.
But, is it possible on CID 53?
Can I use a CID 52 Custpack?
How to do this with JD+FAR ?
Sorry for too many questions…
Custpacks are not CID dependent. Use a “CID 52” one then. Extract the zip that contains is, it has a tpa folder, upload its content to phone fs/tpa dir.
Thx Peti,now i have k550@w610.
I applied xaero ma loud to my phone,n’ i found that i can’t use my headset for walkman n music files,but it’s ok when i use d radio..
Did i make any mistakes?
Thx
Did you delete the original acoustics from the phone?
Mistake. Upload W880 acoustics and then xaero without deleting anything.
nope, finished flashing main,fs, n cda, i uploaded xaero ma loud using ofs, i just copied it.
it’ll work only after i call the operator (after i heard the voice w/ my HF, then i use the walkman->it work).
ok, ill try it 🙂
thanx Peti, been a great help 4 me
😉
hey there! i wanted only the jd flasher i already
have FAR manager. PLS
We have it only this way, I know se-nse hosts it standing alone.
db3150 can flash or not?
my freiends just bought her handphone w910. when i i want to connect use far manager, connecting appear…… how? cid52, db3150
DB3150 is not flashable.
so? can’t do flash menu?
so i also can’t access the fs?
it is other way to use flash menu?
Too many separate posts. You can’t do anything without professsional tools.
what do u mean professional tools?
can u teach me how? plzzz
Can I look up or reset the Lock Code (not sim lock) of my w580i with JDFlasher? Would an OFlash do it? Thanks.
@duan: pro tools -> $1000 or so
@jimmy: simlock? or the one on startup but not simlock? Maybe, but I’d say it’s stored in GDFS. Give it a try.
Well, my w580i is CID53 so that means I can’t apply patches, but is there any way to reset the phone start up lock code? My nephew found it and I don’t know the code.
Maybe reflashing FS resets it, I’m not sure. But if you have warranty, try going to the place you bought it at and ask for help. If they don’t, reflash. If still no go, bring it to any service center.
thanx peti…
Thanks For Guide…
I FLASHED My K530i To W660i ….
Working very well.
Thanks for Your Support…
Thanks Peti, but How can I flash fs in w580i? Is that possible?
I have acces to Ofs but when I select the fs file and hit copy it doesn’t give me the flash it option.
I have CID53
Hi,
I just update the new firm ware for my phone 580i. When I came from US and used your tutorial for unlock but now how to unlock the new firm ware which is update service is loaded. firmware is R8BE001 and cid is 53. i tried with JDFlasher and XS++ to load older firmware with out any success as it can not load the firmware. JDFlasher gives error some put header 19. I can not unlock the phone. please help me for same. Thanks
hi i am really enoyed now been trying to unlock my k810i i have followed all guides it is at the latest patch by that seuss thing and one of them i tried is the setool and that said my phone aint supported and i tried the simlock and it would flash i tried using xs with the patch to unlock it and the button execute patch wouldnt appear and i tried using the file of simlockgen and that said failed and now i tried the far and i thought i was getting somewhere but when it says select as a babe image i cant all i can do is select cancel cancel caneel can some one please put a noob guide with files and everything (sry for being picky) as i have nearly thrown it out of the window my phone is also locked to orange if that helps my email is [email protected] thnx in advance also i probably wont see any replys made on this site sorry
@jimmy: oflash, flash new fbn file on from topse or somewhere.
@Dev: olny jdflasher handles CID 53 phones but can’t patch them, so no free unlocking.
@Rhodderz: is the phone CID 53? See in XS++.
How to free unlock my k550i?(cid 53)
Can’t do yet.
i want w300i fs and firmware red 49 asia_Levan DB2010.
can i flash my z530i with w300i.?
Hi This Is a Very Good Software
But This Can’t BackUp Gdfs
My K810i Is CID 53 PLz Help Me For Back Up It (GDFS)
BYE
Please Learn For Hacking K810i
By JDFlashing
Stinson
no you can’t
please don’t try
Thanks For You
Hi Akshay..canu plz tell me wethr i can flash my phone that is a k 550i to w610 using jd flasher.will da flasing harm my warrenty??
Can u plz guide me as im new i n dis field!!!
i tried to use x++ but den i read it cant flashcid53 phonez,,actually i had used da seus b4,,cant i revert to sum other cid??,,,or is it possibl to modify ma phone wid dis cid?????
my phone propertiez r,,,
You have 30 seconds…
22:46:02|
22:46:02| Baseband ID: 9900
22:46:02| Protocol Version: 3.1
22:46:03| Phone name detected!
22:46:03|
22:46:03| Profiling SEMC phone…
22:46:03| Platform: DB2020
22:46:03| OTP CID: 51
22:46:03| EROM CID: 53
22:46:03| EROM Color: Red
22:46:03| IMEI: xxxxxxxxxxxxxx
22:46:03| Phone ID: K550
22:46:03| Region: S_ASIA_LEVAN
22:46:03| CDA: CDA102568/110 R5A
22:46:03| Firmware Version: R6BC002
22:46:03| EROM: R3A022
22:46:03| Ready for operation!
Thnx in advnce!>>>>
yes, your phone is CID53.
as i said again you should use CID53 firwmares with jdflasher !
How can i backup da files like for example the original menu.ml in the tpa/present/system folder using jd flasher,, ??
Hi akshayy,it’s me again.I’ve succeded flashing my k550 to w610 just now and it’s look great just as you said. Thx for your great tutorial.
But i hav a little problem. After i flash my fone,i modd its acoustic and camdriver. There’s no problem with acustic,problem comes with the camdriver i replaced. When i want to use camera there’s warning says “another aplication is running. Close it and start again the camera”. Do you have any idea what’s wrong with that and how to solve it? Plz rply soon..
no need to backup gdfs with jdflasher.
bambu_men
do a full reflash of fs and main and cda. and don’t use that camera driver again.
[:] don’t you have another solution for that?? if that is the only and easy way, then i’ll do it again. But what is the best camdriver suite for K550@w610?? can you tell me (developer and version) and where can i find it?
actualy i want to ask more question but that’s enough for now. plz reply as soon enough :D. thx for your kindness
hmm hey no idea, i use default camera driver. not keeping in touch with it. you can ask at our forums, our users definitely know it. 😉
It bricked it AVOID IT!
.
Hi akshay, thx 4 ur reply. It dosn’t matter anymore. I do as ur said, full flashing again. Then i use mhq v2.39 A-version camdriver ‘n i think it’s the best camdrvr for my fone. But if u know another better than that, plz let me know.
Now next prblm is my cam seal not function anymore ‘n there is no cyber-shot logo when i open camera. Can i get those both thing back ‘n how to do that if it can?
Thx again.
that’s the dis advantage..!!
even i face same probs in k550@w610
but its not much
ha ha….oke akshay, tenkiu
m using w710i….i tries uploading sysgfx patch by using jd flasher but in vain in iflash thing i dun get ne options…wat to do…wat all things are necessary n is it necessary to apply quick access patch if it is applied frm first vis se2toolite??pls help…
i have sony ericson k810.in tat music player tere has no megabass option..can i add or feel its putching any way..kindly plse help me.
Hy akshay or peti. I want to ask some question but i’m sory if i’m asking in the wrong post.
I want to add some language (lng file) to my k550@w610, how can i do that? I’ve tried upload it (lng file to its dir) but what happen is other language, except english, is gone. Do i did wrong? Or it’s not that way?
If this post is not for question like that, plz rply to my email.
Thanks for the guide AKSHAY,
I just flashed my phone from k30i to w660i and works great.
This process took me a good 8 hours (over two days) to do. Finding the FS and main for CID53 took the longest and reading all the materials on the process.
It can be done, just read Akshay guide, then read it again. If you don’t understand a step, stop read up or read the comments section. Then read the guide again. Every word in this short guide is gold.
I only did the flashing so I can have the ‘Sleep mode clock’ option. But as I found out later on the k30i is a different screen and it is very dark, hence the reason SE took it out. But that option is important to me.
.
Hey! Im really really scared that i might screw up my K530 =( Anyway, I get a “IMEI = NULL”, “using GDFS Profile” error that someone else had and also an XML Missing error in JDFlasher. =S Does anyone know why?
hy akshay, never mind of what i ask in on my older post. i have read your tutor about it now.
Hi, well, i’ am trying to upload some icons and an camdriver using the fs. i go into ofs. I cannot drag and put, it shows i can but nothings there, i can only delet items, and i’ am cid 53, help? i mean how do i get my pack in…?
ok i have not updated something.
download jdflasher again
and try.
thank you.
and sorry for all late replies.
hi! i’ve got a question.. i’m not new to these things.. i mean i’ve debranded many phones using your tutorials.. when i tried to debrand my phone (k800i) i’ve updated at SEUS.. and got my cid from 52 to 53..so i couldn’t nothing then.. my question now is.. can i do a full reflash ? can i debrand it using any free program ? it’s bought from Orange Romania and.. the software is really stupid..
ooh.. and another question.. can i unlock it ?
no you cna’t now.
you can only flash it and customize it with jdflasher.
to de brand you need main and fs with romania language and cda for that FS which has romania language.
thanks for the reply.. i just finished debranding it.. it looks like a sony ericsson now :)) 😛 i don’t like the phone with romanian language on the menus.. i left it in english.. thank you for your help. cheers michello
I’ve a question. Can you retrieve your phone lock code with FAR&JDFlasher?
Thanx!
@Kristoff
click on repair or unlock button it it re-set the lock code 2 default through se tool!
hi akshayy,
please help me, i have my k610i red blink, how to fix this with xs++.thanks
@heritage
look in our red blinking/phone dead tutorial
u can fix it through se tool!
Hi Akshay! Thanks so much for the tutorial – I’ve been putting off trying to use FAR and JDFlasher on my CID53 K800i as I thought it was complicated to use. I just tried it with your tutorial and it works great! I just have one question though – How does one mark All files for transfer to the phone’s FS? I plan to mod the acoustics of this phone but it seems that there’s no way for me to mark all the acoustic files from my computer for transfer to the phone’s acoustic FS. I can mark them one by one via mouse right click though. Any help is truly appreciated. Thanks!
@Dan
its simple…just stay the right button of mouse clicked…n move over the files u wanna select!
Ummm… I know it sounds stupid but when I want to connect my phone… more exactly when you choose script there is no DB2010 – because my phone is a w200i DB2010 – I also tried DB2012 and DB2020 because they were the only ones. With the DB2012 chosen I get an error when I connect my phone… and when I connect choosing DB2020 it connects and shows me the “oflash” and “ofs” but when I double click on oflash I get an error… Btw I updated my phone also with SEUS and got it to CID53… Basically what I want to do is downgrade it back to a CID52… Can this be done? Please reply… Thanks in advance!
Ummm… please reply on how to flash… if it can be flashed – i have a w200i-…
The service guys updated my phonw to cid53![:(] now i need 2 flash the phone
i flashed my w580i main with W580_R8BE001_MAIN_GENERIC_LA_RED53.mbn and fs W580_R8BE001_FS_APAC_RED53.fbn
Used the cust pack i used for flashin when it was 52..but when i started the phone it shows that config error… am i usin da right cust pack and the folder has some 15 files in it…how exactly should i go about copyin em on jd flash? do i need 2 reconnect after flashin fs and main? coz thats what i did… Sorry im confused…
Nope figured it out..its workin!:)
Hi akshay, i’ve putting camdriver0.dat into my CID 53 w660i, with Far+JD flasher… when running those program works fine, the driver are copied. But when quit the program and open it again, my camdriver0.dat wasn’t exist… only camdriver1.dat in it (Ifs/settings/camera). Can you help me how to write that file succesfully, coz now my camera doesn’t work again.
Thanks Before…
hmm interesting. new problem again. did you copy the file properly and after copying you should shut down jdflasher correctly. here is another tutorial with pictures. see these pictures. may it helps you.
http://forum.semania.cz/index.php?topic=17113.0
Ahaa, thanks Akshay… i’ve found d problem. i didn’t shut down jdflasher corectly… i’ve just click quit button without going to root directory first. That’s why there was no confirmation to wrote down the file. Thanks for the link…
One more question, is it fine to overwrite my w660i camdriver with cybershot series camdriver?
Thanks once again.
@mancini
no no problem…just get it!
no, use drivers made only for your phone.
ok so i thought this would be the proper place to post this since im having trouble with flashing and stuff. so on the step where you have to find the firmware on the right side of jdflasher i have the firmware and im able to locate it, but every time i hit yeah, flash it. it comes up with this
PutFiles<putfile<putfile_flash<flashbabe<header>>>>
so im not sure whats going on
thanks
@bhuvan
i see, thanks bro
hmmmmmm you are using jdflasher right ???????
ensure that firmware is not damaged file. download jdflasher from here. this is the latest version should not produce that error. this may work out for that error.
http://www.se-lifestyle.com/filebase.php?d=1&id=490&c_old=43&what=c&page=1
hey Akshay,
so i got the flash themes on the phone and every thing but when i turned it on it said configuration error please contact your service provider
put the CDA or reflash FS and then CDA/Custpack
what is the CDA
CDA…IT MAKES UR PHONE’S LANGUAGE AND FEW OF NETWORK TWEAKS!
WITHOUT IT ULL GET CONFIGURATION ERROR!
so how would i make that change on jdflasher?
just upload the cda files to tpa\preset\custom
Hi Akshay..
I recently updated my W610i and as it was giving CID53 I used JD Flasher+Far manager.
In that I am getting the error when I select any of the oflash or ofs–
SetDirectory(setdir(setmode(doscript(qhldr(file 070703 1229 DB2020_SEMC_RECOVERY_P3N.2020_1_BLUE is not a babe)))))
Can u tell me what should i do.
@pankaj
i guess u gt blue version fs and main…instead of red!
do one thing…re f;ash it using seus as already ur cell is cid:53…so nthng will go wrng
it will get u red one…and may b then it will work
do tak care of choosing the right platform…i.e. db2020…max speed
Hi,i am totally stuck with opening “ofs” 🙁
a error cames up telling something like this :
“Set directory………………………………………bad answer”
I have far manager v.1.70″,with the latest db2020 and cid53 updates,and my phone is k800(db2020-cid53)cable drivers installed,some help please ? 🙁 :/ 🙂
Thanks in advance
oh , i just saw pankaj question,who seems to be quite similar,i posted all the info that i know,hope it will helps other people too 🙂
So here they are.. :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Baseband ID: 9900
00:32:17| Protocol Version: 3.1
00:32:17| Phone name detected!
00:32:17|
00:32:17| Profiling SEMC phone…
00:32:17| Platform: DB2020
00:32:17| OTP CID: 51
00:32:17| EROM CID: 53
00:32:17| EROM Color: Red
00:32:17| IMEI: 35471601xxxxxx
00:32:17| Phone ID: K800
00:32:17| Region: MEDITERR
00:32:17| CDA: CDA102568/4 R5A
00:32:17| Firmware Version: R8BF003
00:32:17| EROM: R3A016
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@john
what do u want then???
@akshayy
I want to get in “ofs”(by using farmanager+Jdflasher plugin) and put some flash themes, but the problem is the error i had told you 🙁
😉
?
@john
which error.??…u post the whole thing together here…
@akshayy
This
“Set directory…bad answer”
thanks for your help guys i finally figured it out how to flash the themes with far manager.
@john
when ru gtting this message??
when u open a directory on ur hardisk???
@bhuvan
Hi,
i get the message when i click ” ofs “,
(there are two options ” ofs ” and ” oflash “, after connect i choose ” ofs ” and there comes the message error)
hey guys i’ve come across another problem. i am trying to add new cam drivers to my k850 and every time i go into far manager and select all the scripts, i hit jump into a large rabbit hole and then you have to connet your phone. well when i connect it the phone starts by itself and goes into mass storage mode. so i cant go into the file system or anything. please help
thanks
i keep getting the put files error. trying to debrand my k770i. it is CID53. have tried many firmwares thinking they could be corrupt but have been thru endless different files and no luck. please email me asap i need help! [email protected]
thanx!
@john
what error u gt?
@dillanmac3
its doing so cuz u r crossing the time limit!!!
better…install the drivers right way…and den do!
if jd do not connect…den automatically this happens!
@i keep getting the put files error. trying to debrand my k770i. it is CID53. have tried many firmwares thinking they could be corrupt but have been thru endless different files and no luck. please email me asap i need help! [email protected]
thanx!
rename the firmware name to simple alphabets and numerics…including the folders in which they are kept
ya but it does it as soon as i plug it in
@bhuvan
This :
error: SetDirectory(setdir(setmode(doscript(cmd3c(hdr(cmd3cbody(bad answer 10)))))))
Help PLEASE,what ca i do 🙁 ?
@dillanmac3
u r not pressing the c key!only this causes this!
is it workiing fine???the key??
after clickeng on jump in large rabbit hole….remove the battery…plug it back..dont turn on the device…keep pressing the c key…and plug in the cable!
@John
strange!
let me gt dis to akshay!…wait for the reply…
well u gt cid:53???
the key works, i took the battery out after i pressed jump in a large rabbit hole then i put the battery back in plugged it in held c and it still came on i held it until the phone came on. idk y it is doing this
@ dillanmac3
is it solved???
@bhuvan
SOLVED !
Thanks for the help 😀 !!!
I downloaded JDflasher again from here this time and it worked 😀 🙂
—DONE—
But now i can not install the usb flash drivers of my sis. w302 🙁
When i conect the phone ,presing “C” all the time,the mass storage comes up in few seconds…,really fast 🙁
What can i do to install them :/ ?
yes the problem was that i was using far manager, and i needed to be using a2 uploader. so it wasent the phone just the program.
i want to debrand my s500 it is cid53
so far i have main and fs files
S500_R8BE001_MAIN_GENERIC_LY_RED53
S500_R8BE001_FS_ANZ_RED53
but i cannot find a generic custpack that matches does anyone have a link to a suitable custpack?
thanks in advance
oh and my cda is 102765
@dillanmac
wow!
@lala
from region r u??
@ John
connect it the same way u connected urs!
u mst b commiting some mistake!
@bhuvan
i’m from australia
@bhuvan
i read somewhere that you could modify custpacks yourself so could i use
HB1-06_Gen_CDA102568_9_R8A_GENERIC_ANZ
and modify it so i can use it with my phone?
@lala
try it…if doesnot works..then delete it
@bhuvan
thanks just needed confirmation from someone who knows what they’re talking about 🙂 as for the gdfs backup…the chances of my phone stuffing up are relatively low right?
forget gdfs backup, not necessary any more, its 2009, that’s the past, 2007.
hey, can anyone help me out.
at first i flashed mu se k550i cid53 to w610 using jdflasher. It si working fine at that time. Than think it can be flashed to w880i to, so i flashed my that phone to w880i cid53 using jdflasher.At that time when i power on, it displayed a white screen and not turned on. So i flashed my phone to w610 using same main+fs+custom pack. But at this time it is showing no netw. coverage. help me urgently.
my email id [email protected]
My phone is K800i with cid53. I am new to JDflasher I want to apply a few patches. When I connect my phone using jdflasher after installing USB drivers, I get the following message:
Open Plugin(connecttophone(getcid(cant find device info in xml [53red])))
akshay pls help
@abdul muqeet
as it says
Open Plugin(connecttophone(getcid(cant find device info in xml [53red])))
your xml version is outdated one!
get the latest jdflasher with cid:53 plugin from our filebase!
sorry for my english,i have k790i,it works for me,but after restarting i can’t see phone language :arabic,french,….. i see jsut english.i can use just writing language,and the fonts & the flash menu is ok too.so the problem is phone language …. pls help
@kof64
get the other cda files
and ya get other font or with .xml file
is it possible for me now to change the menu.ml, cam driver etc using this jdflasher ? i have k800 with cid53 firmware. i just can’t wait for xs++ 4.1 for windows. please help!!!
@amigo
yup with jd flasher you can access your fs
bro…
i want to flash my k530i cid53 db2020 to w660i as soon as i use FarManager + SEFP ALL CIDS + jdflasher ….and i try to connect my phn pressing C it throws an error statin
“OpenPlugin<connecttophone<getcid>>……hw to deal with dis..” WAITIN FOR UR REPLY
don’t know. follow tutorial properly. you should shutdown phone and then re-insert battery and connect phone and have battery charged completely.
i had shut down my phn properly and also reinserted the battery ….should the battery be charged till 100% or else justify pls
it should have some decent charge. have you installed the usb flash drivers?? you should use Jdflasher. Select script as db2020 during flashing.. did you see the flashing video of a db2020 phone ? its link is given in tutorial.
my batt chg is showin 59%…and usb is installed as well as my phn is showin the details when it is connected to xs++….
i hav downloaded the tuts as well and im xactly followin the same……
this is how the error looks like
replace hxxp by http
hmm the picture is really small. lol. and what site is it ? use some other nice image hosting. am removing that link, i don’t allow links to suspicious websites.
lol actually i gt tht link frm orkut…as i uploaded tht pic has a scrap no worries i uploaded the same on to my website….here is the link to it ….just click on the pic to see a larger image
i used far manager and jd flasher for my k790i to flash fs: europe 4,i did the same thing in the tutorial and the result is ok too,but after the restart i lose my phone languages ,i keep just the writing languages,the new menu and the font.i want to keep also the phone languages.thx
sorry,i forgot to tell you i used fs: s_asia_levan to flash my first fs :europe 4.because in s_asia_levan i can use more languages.thx
@ Jago
then try other fs and ya…cda files too!
that will help u
plz i need this file : K790_R8BF003_FS_M_EAST_N_AFR_RED53.rar ,coz no website have it or it’s not for free…and also a custompack for my k790,thx.
@jago
check it on topse
id:-
vishnuhost
danger
hi!!! i want to know how to Downgrade DB2020 CID53 to CID52?? thx
@kof64
no way of downgrading erom!
bt y u wanna do that???
free cid:53 patching is available
Does this jdflasher linked above support for w200 cid 53. Cz when i try to conect it eror.
Thx in advance
Does this jdflasher linked above support for w200 cid 53. Cz when i try to conect it eror.
Thanks
salamat sa tutorial!
gusto ko nang maiyak Ü
napakalaking bagy ‘to
help me!
why i cant open far manager at my laptop..
it said,windows has encountered a problem..
send;dont send;
but i can open my far manager using my desktop computer..
help me!
@punkrockelite
well….are u using it on sp3?
Im so disappointed!I have followed every step of this tutorial.After flashing done,i removed btry,insert sim and m2 and turn it on.Damn!….No sign of flashing!It is still the k550!How this could happen!!!Im so frustrated.I have flashed both main,fs and applied proper custpack!
@Forhan
huh!!!
not at all possible!
ohk…did you safely removed your phone from jd flasher?
I did just according to u r tutorial.But the problem is-
when after selecting the main file to flash with,babe image doesn’t appear as the option.I just select copy and it is copied.This happens also with FS.As a result my phn mmry has been decreased(from 77MB to 34MB!),but it dint gv me anytng.Same k550(cid53)!Watz wrng plz suggest me
@Forhan
firstly dont go for ofs…u need to open oflash for flashing in jdflasher
secondly..unzip the package…then drag the .mbn file
@Forhan
you must be copying full .zip pack!
extract the firmware
whats the extension of file u are copying?
Hey :O
im wonder about the customize.xml and preloader.xml files. Do you need to find specific ones? or can any be used?
@Sethzen
You need to find ones specific and compatible with the version of FS you have used.
@ sethzen
specific ones
acc to ur region and phone’s model
Right, so i have a w580i CID 53, im using these files to flash:
W580_R8BE001_FS_CENT_EUROPE_RED53
W580_R8BE001_MAIN_GENERIC_LA_RED53
–
Would i be right in using the contumize.xml etc from this CDA?
W580i_CDA102568_2_R8A_GENERIC_CENT_EUROPE
@ Sethzen
custpacks are not firmware dependent…
yea
this is right…
take one acc to ur region
I started to flash my phone. I flashed the main okay, but when i went to flash the FS i got this error
–
putfiles(putfile(putfile_flash(flashbabe(header(send header error 15)))))
–
What do i do? Can i use my phone without FS for the time being? XD I dont want to turn it on incase something bad happens 😛
Hey, i got my phone flashed 😀 took about 7 files to finally get one that didnt get an error in babeck.exe, thanks 😛
@ Sethzen
nope…u can give a try..and get the latest jdflasher from our filebase
and use it..
if still does not works…get other fs from diff place
Where do you find the CBA files for the phone :S
This the only bit i’m really lost on…
and maybe the fs file for w580 r6bc002 europe?
Argggg 🙁
CID 53*
oh is okay
I flashed it yet…
It has locked itself again
Would anyone know a way to like undo the ofs and re do it, or undo the whole flash and re do that :S
Cheerz
i successfully flashed the S500_R8BE001_MAIN_GENERIC_LY_RED53
but then when i tried to flash this firmware
S500_R8BE001_FS_FRANCE_RED53 it came up with an error… error 18 i think but it didn’t work and now my phone’s dead 🙁 it makes the vibration when i press the power button but nothing happens 🙁 what can i do? i was going to flash this custpack Lindsay_i_CDA102765_3_R1A_Generic_Trade_France but i only speak english so any alternate fs files and custpacks are fine please help!
btw my phone fs was originally anz now i don’t know 🙁
boo
post the full error….which software u are using?
@ bhuvan
iputfiles(putfile(putfile_flash(flashbabe(header(send header error 15))))) with jdflasher+far off this site but phone working now i used seus – was desperate
i only want the flash themes – can i get them without flashnig?
thanks boo
boo
well nice name…lol!
get the latest jd flasher from file base…that will work
]
thanks bhuvan 🙂 …obviously not my real name though sadly 🙁 lol
my phone seems to take longer to turn on since i flashed it with seus does flashing make it slow?
boo
NOPE…
AND NEW FIRMWARES ARE WITH FIXES…SO…IF THERE IS DIFFERENCE OF 3 5 SECONDS…THEN DONT BOTHER
How do i know if my phone is unbranded??
i can use any sim card i like.
can i use k810i patch on k800i???
hi bhuvan
so if i shouldn’t flash my phone again…is there any way of getting flash lite menu?
thanks boo
Wasi
if u can do so..then its unbranded
nope…patches are firmware dependent
boo
yea…upload them back to ur phone…simple
I have a w580i Cid 53 phone and i used jd to flash my phone but when i drag my firmware into oflash and try to flash it gives me an error
Im using this firmware W580_R8BE001_MAIN_GENERIC_LA_RED53.mbn
I have no idea what the problem is
Ish
whats the error?
Hi guys,
i need to know to how to backup GDFS with Far Manager, coz my k550 is CID53 so cannot do anything with XS++,thks in advance
dinesh
nope…
xs++ wont work for u..
if u use linux then phone xs will work!
hay Bhuvan ,Akshay And Dowsy……………
i am in big trouble…please pull me out…
i used this toturial…now my fone is Flashed…but only that i can not cusomize it.. it give an error which states…
“file not found cannot fined executable file”pkzipc”.”
W580_CDA102568_7_R8A_GENERIC_C_ASIA
this is my CDA . and i am from Pakistan
@Shahzad
Try using FAR Manager, I dont use either JD or Far as mine is CID52 but its worth a try. Also Back up GDFS using Far if u haven’y already
Hi Bhuvan ,Akshay
when i tried to flash (k550i CID53)using FAR manager+JDflasher getting a msg SetDirectory(setdir(setmode(doscript(cmd3c(hdr(cmd3cbody
(bad answer 10))))))….This is just after detecting the phone!
What would have gone wrong?
(I am using winxp SP2)
Shahzad Iqbal
when are u getting that error??
u are on step of uploading cda files right?
dinesh
which jdflasher are u using?
download the latest one from our filebase
connect ur phone back
dont know why that error is coming
can we flash a z310 cid53 firmware using kd flasher ??
Hey Bhuvan
got the new FAR manager+jd flasher(CID53),and rest is just magic..;-)))
Now have the Cybershot+walkman phone!!
Only dissapointment is before flashing i had to charge the phone for only 20minutes with optimized charging, but now taking 3 hours to get full charge…What i can do for this???
Is there any files to be added to activate the optimized charging again?
Hi all,
I have a k790i and I had the stupid idea to update my firmware in SE site…
Now I have my phone locked for all companies…
I could see it is updated to CID53.
Is there a way to unlock that F!@##$ phone again in this CID53???
If yes, please bring me the way!!!!!!!!!
dinesh
what u wanna do?
Guilherme
cid 53 cant be downgraded
but follow anycid method to unlock
Bhuvan,
the phone isnt getting charged quickly as it used to be.but iam willing to compromise that, since all the other funtions are pertty much ok.
best of all now iam having a walkman k550i 😉
thank u all for the help!
u guyz are great !!
bhuvan
Brother i did fix that problem now ..i think customization file was not good or it might not be appropriate for my phone but i tried some other files now i have customized my phone ..
Now i have to upgrade my cam driver,display driver, Acoustics which are good for my w580 i have everything original in my phone but i want to improve volume keeping in view the quality…
i need links for those things and if possible tutorial and path,where to put them…i know it is too much but please..thanks in advance…
hi is very cool this tutorial but i’m CID53 and when i do this his say error help
waka, check out new jdflasher tuotorials
now jdfalsher works with CID53. download latest version.
Hi Guyz,
anyone tried anyone of the available modded cam drivers for k550/w610?
is it worth installing a modded camera driver?
dinesh…i tried mod my cam driver but it can’t be patch (vkp) says error (different blocks)…i hope akshay could help us including the mega bass for k550i R6CA001 CID53..please Akshay…
Dinesh, its your choice ! it works.
hi .. i’ve got a sony ericsson k800i, cid 53.
I am getting the white screen of death but the IR does not light up.
The screen is always white
But my PC still detects my fone. wat should i do? apart flashing it???
lost wanderer
only re flashing
thats the way out!
” apart flashing it???”
why???
u tried it earlier??
hey akshay,
i have a w700 and a k750…i can store only upto 200 messages. could you help me out in increasing that capacity?
balaji
not really
i guess patches are there for 10000 msgs
jump to our forum for requests
how can i flash acoustics to my k810i cid 53 fone
adil
upload acoustics to ifs\settings\acoustics
use jdflasher as ur phone is cid:53
i want to flash my k530i (CID53) into w660i firmware … is that ‘OK’ if i just flashing the firmware without flashing the fs ??
i just have one file named ‘W660_R8BE001_MAIN_GENERIC_FY_RED53.mbn’ , is it works??
rio
ya
its the main
u need fs too!
bhuvan
OK, thanks a lot bro… i had successfully convert my k530i to w660i using FAR + JDflasher …
To akshay: thanks for the video tutorial, it was so awesome … great … rocks ….
hi, im having a problem with my CID53 k800i. im trying to put some acoustics. i click ofs n go to ifs/settings/acoustics. but whenever i try to copy the acoustics(drag n drop) it says “file not found, cannot find executable file pkzipc'”. help would be appreciated thanks.
hi,
On selecting jd flasher, far manager is crashing. any help please..
Vijay, download it again.
Hi Akshayy,
So I wanted to put some spiffy new flash menus/themes and walkman skins on my w880i, right…
So, I flashed my main and fs, added the .swfs and walkman skins, and then recopied a custpack I downloaded
too… This was all supposed to work, coz I followed this tutorial to the tee..BUT when I put on my
phone, I get the Configuration Error- contact your service provider thingy :(( why?? what am I doing wrong?
I really really need my phone and I would appreciate and be eternally grateful towards you if you could help me.
Here’s the main, fs and cutspack files I downloaded, maybe it’s the wrongs ones? I couldn’t find a custpack for
CDA102719/158 anywhere..
HB1_06_Gen_CDA102568_11_R5A_GENERIC_EUROPE_2
W880_R8BA024_FS_EUROPE_2_RED53.fbn
W880_R8BA024_MAIN_GENERIC_AI_RED53.mbn
15:48:06| Profiling SEMC phone…
15:48:06| Platform: DB2020
15:48:06| OTP CID: 51
15:48:06| EROM CID: 53
15:48:06| EROM Color: Red
15:48:06| Phone ID: W880
15:48:06| Region: EUROPE_2
15:48:06| CDA: CDA102719/158 R1A
15:48:06| Firmware Version: R8BA024
15:48:06| EROM: R3A022
15:48:06| Ready for operation!
sorry for the long comment >__>
Tigerlily, have you fixed yet or not or still need help ?
i was wondering i have k810i phone.. and basically lookin at all the posts online diff diff sources i managed to mess it up now when it turns on its jus white and soo .. starting from scratch… phone .. spec.. k810 cid 53 db2020 .. my question is.. can i put in any firm ware ? like r8ba024 is what the SE Update thinggy left my phone at but inorder to do the anycid patch i will need to do.. r8bf003… can i patch it with this or will i have to do .. r8ba024 like SE did.. pls help . i want this phone bak to workin condition and alos when I DO CDA!! does it matter to get a proper CID53? cuz i cant find such a thing .. or is it jus generic only cid 53 matters for FS and Main thanks also i used akshay’s tutorial .. the only one that got me somewhere in tryin to write anything into the cid 53 phone
Shan
get a firmware compatible to cid:53
at the end of firmware name its written 53 or 53
get 53 one
its upto u which one u like
cda is not erom based
get one according to ur region and phone
i would recommend u to put on one which supports max no of patches
FS is not cid dependent
Thanks Bhuvan u answered all my questions im glad u understood all my noob questions i appreciate ur help and will post if all goes well or i have anymore questions
ok so i install the FS for my phone .. perfect about 209 blocks.. does it .. patches fine!! then i try to go into the OFS mode to do CDA but it gave me an error sumtin 89 .. be that as it may i have few more questions.. when is a phone completely dead like i might be wasting my time.. maybe i jus screwed it up with doin wrong firmware upgrades n stuff cuz i used to be able to get into ofs modes .. but not within the last few days pls help as to some insight on these phones and when i shud give up
setdirectory(serdir(setmode(doscript(activateloader(bad89data (code 0xf01) thats the error code sorry i didnt include it please help thanks again..
Shan
yo!
Shan
i guess acc to this error…there is problem in your firmware file
get new one
download whole new jdflasher..latest uploaded by akshay in filebase
u are trying reflashing
right?
what problem exactly u are facing?
sorry but we have to reply a lot of comments a day…so…i guess i understand
not a problem bhuvan atleast im gettin a intellectual response anyway .. i paid and now have my phone CID 52 im guessin its easier to work with but the service didnt fix any erom or anything.. and when i tried to do gdfs fix i got some error 29 from .. kulenkendi fatal error then with another program i got fatal error this phone cannot be fixd i think.. regardless i will post proper mesges .. however my question to u is when do i kno to give up on the phone and throw it away .. it still retails for 300 and cheapest on ebay is 250 so im reluctant to throw it.. the condition is …. im able to flash .. main and fs when i go into OF mode to do CDA im gettin 89 error and other sorts ANd when i flash and turn on ITS white screen and constantly jus vibrates .. is it in a condition that can be revived? or shud i jus give up.. cuz its broken i wasted 17 bux cad on .. cID 52 thanks any help in right direction is very appreciated!
as u suggested i went to http://www.akshayy.com/sonyericsson/download/ and i saw FAR manager with SEFP is that the latest
HEy in my search to get this workin i stumbled upon many resources on this site
And erom fixing and GDFS fixin was one of them
so at this point i have control over the phone!! the only problem is
tell me what order to do them all in ? gdfs .. erom. then FS, CDA, MAIN ?
or what combination becuz the combination makes a diff i see for the phone to start up
help on this will be much appreciated .. cuz anytine i have error i do gdfs write and i have control over the phone same wtih erom if GDfs is givin problems
shan
ya
thats the latest
i m am not at all getting what u wanna say!!!!
first flash main
then fs
then upload cda
if there is erom problem then for fisrt repair it
if nothing works then upload back original gdfs
ok i’m able to reflash FS and MAIN except CDA
however i can fix erom with setool2lite 1.11
and i have back up of gdfs but i think its a damaged GDFS
Now my questions:
1) at what point do i know that this phone is no longer fixable! ?
2) i can successfully flash main, fs,restore gdfs, fix erom.. but cannot start phone its White screen And it buzzes( K810i) what area is the problem?
3) ultimate unlocker changed my CID to 52 .. from 53 cost me 15 EuR but it responds much better now.. but still cant turn phone on with a proeper flash! any other suggestion?
Pls help! or atleast let mee kno that i have maybe screwd up my phone so i give up thanks!
Shan, if your phone is CID52 and in good condition, then using XS++ just relfahs main +fs and cda files and restart phone. simple
if that does not work, try to flash your backup gdfs.
hi all, i’ve download far+jdflasher from here. but it cannot be run in windows vista. it say some exception (0x00004a) or something like that. so i downgrade my pc to XP. thank god it can be run now. but today when i want to run it again it popup an error when i click ‘just da flasher’ . the popup with ‘Send Error Report’ and ‘Don’t Send’. Please help. my phone is CID53, only jdflasher work this time.
try to run in Admin mode, else also try in Win XP compatibility mode.
what is the exact executor.b for w200 r4ja011? I had run the executor in the games folder but my phone didn’t turned off after that. please help me..!
hi akshayy, i’ve tried all that.but still not working
me2kimi
thats really strange!!!!
may be ur antivirus program!really dont have any exact clue
jump onto our forum!
sakimichi
flash to a version whose .b file is there
upload all files…and crack down the main via executor
ok thanks 4 your help. this is exactly error code for this problem. ‘The exception unknown software exception (0x0000417) occured in the application at location 0x10000df9d’
Hi bhuvan. I have overcome the problem with jd flasher. after a few reformating my pc, i notice that jdflasher wont start after I’ve installed microsoft office 2007. sound wierd, but thats the fact. after I restore my windows back to before installing Office, jdflasher work again. BTW, i’m using mic. office 2007 black edition.
me2kimi,
i don’t have ms office on my comp. lol, that’s funn.y
@Jims,
@akshay
whoa!
lol
this solution is crazyy!
i have office 07 installed..but no problem faced!
akshay u use linux…right?
@ Huzefa
I also had that problem with my custom file.
You have to extract the files (your acoustics) from the *.rar or *.zip archive, than you shouldn’t have any problems with your acoustics 🙂
where can i get the preloaded_config.xml file?
Guys the FIRMWARE folder from where we load the MAIN anf the FS..
I dont have that folder..
I am using w580i CID 53..
Please help…!!
Navjot
get from
http://www.topse.ru
or google it
Yes i am doing that but what I dont know is that should search a MAIN for my phone(w580i) or should I search it for the I want to Flash it into….
Navjot
dude…i am not at all getting what u are saying
but what i can say is this that download r8be001 53 [if ur phone is cid53]else r8be001 52 for ur w580!
download from topse or google it or 4shared.com
ok ok… i am done flashing as per given in the tutorial (flash video)..
bt now how do I install Flash Themes I mean how do I add .swf files into my phone..??
Navjot
upload .swf file to tpa/preset/system/desktop/flash
upload theme to mem
run .thm
simple
AKSHAYA i wanna chat with u. plz help me for my w350i menu icons.plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
bhuban22
whats exactly happening??
he is off for few days
Hi…i got an error when i try to copy customize.xml and preloaded_config.xml into OFS….i got an error like “” File not found….cannot find executable file pkzipc””….please me…also plese give me the link to download CDA…….please help me…i am unable to switch on the fone..der is a configuration error please help me….
aksay can u unlock z310i for free
AMinur
no
its pnx platform
can be debranded for free
I just want to upload acoustics, flash menus and walkman skins. Do I have to Flash the firmware first or can I just directly go to ofs and upload the stuff to my phone?
Rezha
yea
u can do that direct way
Pleasee help ! ;(
I think my k550i is dead !
When i flash menu and turn on k550ihe say
Configuration error. Please contact to yournetwork operator or service center
Edmunds
upload cda pack
what is cda pack and how to install it ?
Pleasee help i need my k550
And how to install firmware?
when i install firmware it say flash))babe)error
what is CDA pack?
And how to install it?? 😉
cda is custonization pack??
Edmunds
dude read flashing tutorial back
read about custpack\cda
download it
one which suites ur region and upload to fs in dir
tpa/preset/custom
Edmunds
u are not using right firmware or right script
edmunds
yup
Not Working With my CID 53 Phone
Error shown while copying
PutFiles<putfile<putfile_flash<flashbabe<header>>>
AVS
download cid53 compatible firmware
it should be names as firmware name and at the end 53
like w580_r8be001_53
Bhuvan Plz can you gimme a link i need 660i Firmware
One More doubt Bhuvan CID 53 and Wht is OTP CID its 51
CDA: CDA102823/106 R1A
AVS
http://www.topse.ru
😉
AVS
leave everything
what matters is erom:cid53
I FOUND A PATCH IN WHICH I CAN USE FLASH AS WALLPAPER.HOW DO I USE THAT PATCH(VPK) USING JDFLASHER IN MY W200i
lionel
look at patching guide
hey i want to put flash menus and walkman skins, but i dont know where in ofs i have to paste them, can u tell me in wich file i have to paste them plase.
Diego
/settings/acoustic/ >> Acoustics file
ifs/settings/camera/ >> Camera driver
ifs/settings/display/ >> Display driver
tpa/preset/system/desktop/flash >> flash menus
tpa/system/layout/ >> layout.xml
tpa/system/mutlitmedia/mp/skin >> Walkman 2 skins
tpa/system/preset/multimedia/pe >> frames , clipart etc
tpa/system/preset/multimedia/av >> visualizations
tpa/user >> stock pics and themes…
tpa/preset/system/settings >> startup and shutdown screens !
tpa/preset/system/sound >> all sound files
tpa/preset/system/menu >> the famous menu.ml
tpa/preset/system/fonts >> fonts !
tpa/preset/system/language >> language files (.t9 and .lng)
Should i back up gdfs if i debrand my phone
Bento
yea
why not
for safety sake
if ur phone is cid52 then make a backup
hello~
my phone stuck on “insert correct sim card”..
and i can’t even enter bflash nor bfs..
it says “SetDirectory<setdir<setmode<doscript<gethello<IOusb::getblock>>>>>>”
can someone help me?
megatron
what were u doing?
was it branded or locked earlier?
I try to flashing my k530i week ago. At the step ”
# Hit Jump Down Into a Large Rabbit hole.
# Reinsert battery.
# Connect phone holding C.
# Wait for Initialization ” it shows warning message says “phone id cannot recognize … blabla … ” what should i do ?
Lonti
which script have u selected?>
secondly are u using latest jdflasher?
HI,
I’m using a Sony Ericsson k800i and when i try to connect my phone, i get the following error:
log started. plugin compiled Dec 31 2007 / 18:39:11
create session object
used script: db2020.xml
turn off the phone, hold “c” button and plug usb cable
error: OpenPlugin(IOusb::open(time exceed))
I would like to know, what exaclythis error means and if anyone can help me.
Thanks Alot
Paul Harris
problem in usb connection!
clen the port of ur phone
twist the cable a bit
@bhuvan or Akshay
i update my phone using SEUS…then aftr tht i turn on da phone…
bt i get error said “Please insert correct simcard”…i want to patch using ur akshay method
above…bt in step quick access patch when i double click bflash i got this error…
“SetDirectory<setdir<setmode<doscript<gethello>>>>>”
juz let u know i can access ofs bt not flash…TQ in advance..
hey i have a w350a and ive been trying to debrand it for the longest time i already unlocked it from at&t’s network (using the unlock code) but i cant seem to get it debranded using far manager and jdflasher, i cant even get it connected to the damn thing,
THIS IS WHAT I DID:
Load far manager with jdflasher
press alt + f1 selected flasher
script: pnx5230
port: dcu-60
Speed: 921600
then i jump in the rabbit hole,
then a box comes up telling me to connect while holding “C”
then i put back the battery into my phone without the sim (while holding “c”) (ive also tried holding “2? and “2 +5? different times none worked) now dont get me wrong i tried holding down each of these different times, BEFORE i put in the battery but nothing happens!!!, i have a dcu-60 cable.
PLEASE what am i doing wrong and is there any hope left in this universe for me?? awaiting ur reply
one love
Unbloodz
go to our forum and discuss there!
Hi there! i’m new here. the ‘Application’ & ‘Games’ folder of my K810 cant be accessed. every time it says ‘operation failed’. moreover i couldnot install any software here. should i flash it? My phone particulars which I got through XS++ are as follows:
Phone ID K810
EROM CID: 53
Erom Color: RED
Region: APAC
CDA: CDA102568/101 R8A
Firmware Version: R8BA024
EROM: R3A022
Steps and queries:
1. Install USB Flash drive. But is there any separate drive for K810i or its kinda generic?
2. Take GDFS backup. But how can I make a backup as I couldn’t use XS++ with CID53?
3. Flash it with JDFlasher+Far according to the tutorial. For flashing I’v collected the following:
K810_R8BA024_MAIN_GENERIC_RED53
K810_R8BA024_FS_APAC_RED53
HB1-06_Gen_CDA102568_101_R8A_GENERIC_APAC
Is that all?
Any more steps or things to do? kindly advise me.
One more thing to know, do I need to patch or unlock or something else? as i know nothing about flashing can anyone please help me out?
heh wen i try to connect using far manager…..i get the error msg saying
OpenPlugin<connecttophone<getcid>>……..
pls help me
scloud
yeah…ull have to reflash fs!take backup via my phone explorer of all the content which is there in ur phone memory!
1.when driver is installed..new hardware will be detected..just do it..ull get it
2.no way left for taking backup..play smart…play carefully..nothing would go wrong as most of the people around have cid53 phones only!
3.no..thats it..also jdflasher is fast and poerful than xs++…i find is easy too!so enjoy!no need to patch or something if ur phone is unlocked or de branded!i mean simple se phone!
Hi, my phone can’t turn on after I turn it off for some reason. it’s a w580. From Setool2lt I know it’s FLASH CID53 RED. I read many sites and try to reflash the main (although have very little idea what it is, I hope it will save my phone).
I follow your instructions but it failed when I doubled click on “oflash” . It shows a red error signage “setdirectory…..>>>>”
A side note, I hold “2 and 5” when connect the phone rather than “c” (somehow “c” doesn’t work with my phone)
I hope you can help. Thanks a lot 🙂
Truc
no
first tell me..’c’ key method is not working?
red light is blinking?
yes, it’s exactly like what you said. “c” key doesn’t work and the red light is blinking… 🙁
Hey bhuvan, I just read the your answer on “redlight blinking, dead?” thread. it seems there is no way to fix it myself? Erom and Firmware are 2 different things?
Still what you guys doing here is amazing. I learnt quite a few surprising things about cellphones here… [never thought about these things until now^^]
truc
yea a lot can be done but sorry to say ur phone cant be fixed for free here!
cid53 red light blinking needs erom to be repaired!
cid52 erom can be fixed though!
n firmware is diff thing!
its just os of ur phone!
just get ti fixed from service center!
having warranty?
and get back to learn hell more!
no. the warranty is expired. do you know where I can get it fixed?
Sure, I will be around the corner
truci
dont know!
contact any local sller of parts and accessories and look out for warranty too!
company peple take a lot compared to them
Hi, trying to flash my K800i using this thread, I’ve got to the part where i am selecting firmware ( I have found a generic_main ending in CID53.min but when i am in in copy everything is greyed out (can’t select) apart from cancel. Is this the wrong file type you think?
Cheers
Ellis
no, try again, properly, don’t make mistakes.
Cheers Akshay for the reply but it looks like everything i am doing is correct.
Having a second look though and reading your forums it looks like my EROM is bust i’ve installed USB drivers and used setool2 lite repair button and it comes back with this:
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801167128 CERT:N/A
FLASH CID:53 COLOR:RED
Can’t build loaders chain ;(
Elapsed:15 secs.
Does this mean ‘cos its CID53 that its really bust and no way around recovering it? I have no previous GDFS backup point either 🙁
If this is is the case i don’t remember updating it ever through SEUS to get CID53?? So i am confused :((
Just to add to this, phone doesn’t turn on, has 6 red lights flashing and also light flashes when charging battery in phone.
Ellis,
CID53, sorry, no free lunch for that phone. Get it repaired from SONY ERICSSON Service center.
Regards.
Ok no worries, i had a feelin that was the answer, cheers anyway 🙂
I am quite new to mobile phone customization… I have a w200i and want to add flash menus functionality.
I installed Far Manager +JDFlasher plugin… loaded Far Manager… then pressed alt+F1 and selected “just da flasher”. After that, the program window crashes.
“File and archive manager has encountered a problem and needs to close. We are sorry for the inconvenience.”
AppName: far.exe
AppVer: 1.70.2087.0
ModName: jdflasher.dll
ModVer: 0.0.0.0
Offset: 0000df7d
COOLON, something wrong with your Windows. Never seen that crash. try else where.
i choose the oflash category then
i have an encountered an error says: SetDirectory(setmode(doscript(cmd3c(hdr(cmd3cbody(bad answer 10)))))))
your help will be a great knowledge.. thanks
my bluetooth is not powering on ………… after update from se update service now its cid53 pls hep plsssssssssssssssssssssss
plz help me!
when i connect my phone (w660i) to Jd flasher
after the cid detect thin it gives the following Error:
OpenPlugin<connecttophone<getcid<QH00<IQusb::sendblock<IQusb::dcu_Write Data>>>>
plz help me in solving this problem..!!
reply ASAP.!
hey dude
Do i need to keep a back up of my present settings before flashing and if so how do i do it ?????
Sorry if the question has been asked before
i tried searching but the posts are too many , so i didn’t continue searching further.
Please reply.
i cannot connect se k770.Please help me how to support it.
T H A N K S.
Can any1 help me 2 find W610_R8BA024_FS_M_EAST_N_AFR_RED53???
reply me at [email protected]
hi …….please tell me, from where i can download the CDA files?????
i have a SE W595,what script should i put
hi
i flashed c902 and is not booting up just blinks
akshayy! can i have chinese input + t9 when messaging?
fs apac contains only chinese phone lang, not chinese writting lang!!!
help pls……………………..
how to add writting language ?
through customization or patching?
pls reply ASAP!!!!!!!!!!!!
sindhya peter, bro
u can try top sony,>download session > custom packs> register and start downloading
my jd flasher software do not find bflash option..any body can help me???
I have K800i CID53.. Is changing fonts possible in Far Manager+JDflasher? Or is it only for uploading files to its filesystem?
i am using c905a i need to debrand when i am doing this getting an error while connecting phone at the first stage,pls help me out it getting an error cant find plugin
in Oflash step 4 it says “On right side navigate to firmware location on computer.”
Where can i download firmware for w350?
“Note db2020 users: If you use any of the breaking methods while using db2020 script then you will have to re flash main firmware always before exit.”
how to do that without exiting??? please help…
my phone: Sony Ericsson K800i (db2020; CID53)
help me…
My acoustic
folder error and can not
be opened. This happened
after I input the new
acoustic. Now my W380i
no sound .. who can I do
to restore it as before?
[email protected]
iank
reflash the fs, take backup of phone mem content first
error
SetDirectory<setdir<setmode<doscript<ldr<cmd3c<hdr<cmd3body>>>>>>>
I got that error after i click oflash in jdflasher,please somebody tell me whats wrong n what the solution?…please..
Rico
its slipping!! i mean i am not able to recall what this error is about, go to forum, crate a new topic, ull definitely get it solved
@bhuvan
i got the same error like john’s post said at December 31, 2008, 12:18 AM above.
Please help me bhuvan..
My w880i red53 dead phone.
@rico
tell me the error
error: SetDirectory(setdir
(setmode(doscript(cmd3c(hdr
(cmd3cbody(bad answer
10)))))))
Hey Akshayy,
I cannot access any applications or games in se k800i… it gives error ” operation failed”..
does this need flashing? if yes what kind…. thanks in advance
where is the people?
Here!!! 😉 😛 😀
@NSR, Yes flash it!
@Hx, 😀
hey can you give me main firmware(mbn*) and file system(fbn*) R6CA001 and region APAC………………….please….
Hi…. i have sony k550i i flashed with k550i firmware and also with w660i firmware by using jdflasher cid53 my phone is cid53. it has completly flash and start complatly and good work but when i go to setting menu(press #) then all font become like F and in few second the screen become white after restart phone the screen is stay white and vibreat. and not started only white screen. i tray reflashing… but same problem is come. pls give me solution….. i alredy flashed other se phone it work good…
i want to ask,my phone is w350……..when i flash the main and fs, it success and i quit the far manager…….but, when i switch on it says ‘insert correct sim card’………………….what the problem??????tell me what i have to do………plz
you says flashing fs has to add the cda file………can i flash the main only??????
if i dont flash the fs,i have to add cda too????thx
error :open plugin(open time exceed) everytime when i tried to connect while holding c button. what is this …….my phone is sony w580i .plz send me email and help me..my email is [email protected]
Hello i used the JDflasher i got access to the main folder but accidentally i pressed the bflash folder so it started doing something and then said re- insert the battery and the problem is there that i didnt re-insert the battery and cable but i actually un-plugged the phone tried to turn on the phone…and fail it didnt turn on, so please help me what should i do now and is there a way to return back as default. Help me.
Thats what im getting when i try to restore the firmware http://img580.imageshack.us/i/errorhx.png/ Help me please
My phone is k750i probably cid 49
hey when i connect my naite phon to a2uploader for system files by holding c
it is not showing system files instead it s showing this
phone status:: “RETAIL”
flash id :: 0053
can anyone help me for getting system files
sorry for the question but can i chnge my casing of my k550 to w610 after flashing
asin can dey fit