We now have full fledged support forum SE-LifeStyle, please join us at our forum for problems and downloads and discussions. Or catch us at ORKUT. We don’t provide E-Mail Support any more. You can contact the SE Flashing Team at the forum 🙂
Sorry for any inconvenience caused!
Akshay,
It’s me Zybermax from graphics team @ Se-lifestyle. I can’t access my account @ se-lifestyle. 🙁 Don’t know why. So I have to personally contact Peti. Can you PM me his e-mail. [I can’t even enter my account from another pc also]. Please consider my request. I haven’t any other way to contact him.
hellow there ,well i was searching some like who provide support to install flash menu themes to my phone.can u …
sure, at our forums.
Hi, my K800i started flashing a white screen after starting it up, and I see here on your site that it probably is a problem with the GDFS. I hadn’t backed it up. Is there any way I can fix this or is my phone a paperweight now?
hello i have got a db2020 w850i and i flashed by mistake before even backing up the GDFS file.now when i try access games and applications it says operation failed.can plz send me a email telling me exactly what to do cause im reading here but getting a little confused. that would be great thank you
Hilary, just reflash your phone to know it. use XS++ or Jdlfasher, check out respective tutorials.
Mark Kennedy.
Don’t worry, its common problem on many phones, the operation failed thing. Now you just should reflash FS and custpack/cda. that’s all.
hi…can any …i want to install flash themes to my SE W610 OR W705 BY ANY COST OR WILL .totally disappointed by all my previouis doings.n dipressed n pouched such a flash themes …can some one is welllcome at …9831895645…india
helo ,
I am using W 300 i and XS ++
12:24:37| Profiling SEMC phone…
12:24:37| Platform: DB2010
12:24:37| OTP CID: 49
12:24:37| EROM CID: 49
12:24:37| EROM Color: Red
12:24:37| IMEI: 35797701xxxxxx
12:24:37| Phone ID: W300
12:24:37| Region: S_ASIA_LEVAN
12:24:37| CDA: CDA102665/110 R2A
12:24:37| Firmware Version: R4EA031
12:24:37| EROM: n/a
12:24:37| Ready for operation!
I have done flash menus by FSX method , backed up my GDFS, Is it necessary to flash my W 300 i firmare before
adding menu icons,walkman skins or change Font or for adding phoe open sound?????????
sir
kindly send me qamaker.exe and main firmware for k790i
thanks in advance
Rikkie, its simple boy, you can do it easily, just be careful.
Himadri
no need to flash firmware as long as your comfortable with your current one.
Hi Akshay,
Need a help regarding Restoring the GDFS for w810i R4EA031 DB2010 CID49
I dont have the original backup from the phone.
I used an another gdfs backup file for same mentioned above config.
Started XS++ then Selected GDFS radio button and then selected the GDFS and then clicked on Write GDFS
I have pasted logs below
15:06:18| Sending db2010_cid00_prodid_p3l.bin…
15:06:18| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
15:06:18| This is a PRODUCTION_ID loader
15:06:18| Activating GDFS…
15:06:18| Cannot open GDFS
15:06:18| Activating GDFS…
15:06:18| Cannot open GDFS
15:06:18| Activating GDFS…
15:06:18| Cannot open GDFS
15:06:18| Activating GDFS…
15:06:18| Cannot open GDFS
15:06:18| Activating GDFS…
15:06:18| Cannot open GDFS
15:06:18| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)
15:06:18| …using IMEI name
15:06:18|
15:06:18| Profiling SEMC phone…
15:06:18| Platform: DB2010
15:06:18| OTP CID: 49
15:06:18| EROM CID: 49
15:06:18| EROM Color: Red
15:06:18| IMEI: 35235001xxxxxx
15:06:18| Phone ID: W810
15:06:18| Region: n/a
15:06:18| CDA: n/a n/a
15:06:18| Firmware Version: n/a
15:06:18| EROM: n/a
15:06:18| Ready for operation!
15:06:47|
15:06:47| Sending db2010_cid49red_cs_r3a010.bin…
15:06:49| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
15:06:49| This is a CHIPSELECT loader
15:06:49| Activating loader…
15:06:49| Activating GDFS…
It says Sending Applet CSloader in the frame. and nothing happens after this.
It would be really helpfull If you can point me to the proper method.
Thanks in Advance
Srikanth GR
i flashed my k800i but i getting the error which says that “insert coorect sim card”
plz ttell me what to do???
Hi Akshay,
I wonder if it is possible to develop a vkp patch for w810 (DB2010) which allows the phone automatically start recording when a phone call isestablished.
Many thx,
I will also post this question to our forum
Hye.
I’m the admin of mobilelah.com/blog, a blog specially about Sony Ericsson, would like
to be featured in your blogroll, or in other word exchange link with your blog.
It would be benefit to both of us. Let me know if you are interested through my email. Anyway, you got a
great Sony Ericsson blog. See ya ^-^
Hanne Sena
admin
mobilelah.com
Srikanth GR, Uuse XS++ 2.2
junaid, now just unlock it.
Hanne Sena, I have sent you mail.
i’m having a problem, my computer is not recognizing my phone at all.
having any suggestions? w610i
taavet
is that USB NOT RECOGNIZED???
then clean of the port of ur phone
then connect it back
twist the cable a bit
Hey Akshay, like wat u did with the site, havent been here for a while since the USB connecter is broken on my W580 so i cant do anything to it anymore, lol, so thought i would just say hi … hi
hii Ryan! we just changed the site theme.
Ryan
lol
heyyaaa…
well akshay is off agaiN!!!
its me managing stuff here
akshay
thats great man!
u keep up with ur fans out here!!!
really good!
Hello Akshayy,
It looks like you can solve my problem.
I encountered WSoD (white screen of death) on my SE K750i.
There is forum which tell us solution but it’s not helpful for me.
Im talking about > http://www.expansys-usa.com/ft.aspx?k=94481
Can you please provide me resolution?
Thanks
Jeeny007
look if erom is dead wsod should not come..and playing with erom is dangerous
try reflashing
connect ur phone to xs++ dont forget to install drivers for first…look in xs++ tutorial..
then post back whole log here
Can I have the mainfirm ware for k770 r8bc004 red53.
I’ve been trying so hard to follow all the instruction on many sites to change my internet button into play button, and it seems the only way possible is to patch it. (or is there anyother way possible???).. yet setool need the mainfirmware and i don’t have it
Please can I have it before i think it’s impossible to do anything….
Yudhis
download frm
ww.topse.ru
or from topsony
hey there =) i need the following firmware: K610i R1CB001 CID49 RED GENERIC
can u guys get it?
Hi my name is Ridik ,first Congratulations for the site is the best by following your vidio tutorials i was abble to flash my K530i cid53 to W660i,but now i want to put flash menus on please can you post a short tut for this please,,,,,
Diogo
post for once!!!!!
get it from http://www.topse.ru
or search at 4shared.com
or topsony
Ridik
have a look at jdflasher or xs++ guide
its really simple!
just connect ur phone
open fs
upload .swf file to
tpa/preset/system/desktop/flash >>
upload theme file to mem card
simple
Hye again. I’ve found the firmware but it is in a .Cry file..i dun hnow how to use..how can i convert it to mbn?
Diogo
.cry file???
strange!!!
dont know
get a firmware from topsony or topse.ru
hi you have a nice page here and the video tutorials are superb
I’m a total noob at this, so please excuse the language
I’m not sure if this is the right place to post this. If wrong, please direct me.
I have a w710i firmware R1JC002 cid was original 49. I upgraded to 52 but later when i had given it for service, the cid was changed to 53. so no more customization with xs++ .
i was trying to apply the quick access patch.
I got the right main file, jdflasher,anycid, etc etc.
I was following the video tutorial and everything went fine upto step 3 where I copy the rest file and do “flash as a babe” I got some kind of an error
and now, i can connect the phone via jdflasher. but cannot read bflash and get a timeout error.
The phone dosen’t turn on and if I try to access the fs using FAR, the folder tpa is missing.
what all details/ logs do I need to post and where can I find them?
Is my phone lost?
Thanks in advance
@Bhuvan
yes thanks i did that and its working fine but what about menus where to put them..???
well bhuvan, topsony i gotta pay, topse is russian and i havent find the one i need
Hey akshay
hi…i have read nearly all of your guides and really liked ur ideas and the way u describe the things..atlast i have a w580i and want to mod it with patches..in one ur guides u told tat i shud put main firmware on qamaker.exe and all…but my phone is already unlocked by default..so do i need to still do tat step..and if yes plz tell me where to get proper good firmware for my phone..firmware installed is R8BE001 on my phone…!! where shud i get a firmware from…a proper one…plz send me the link at [email protected]
Hi,
Could you please help me? could you please tell me is there any way to unlock w950i by any method on this website?
Thanks
Andrew
dude check out which script u are using at times
also flash the main and fs both again
get latest jdflasher
pst the error here
Ridik
ifs/settings/acoustic/ >> Acoustics file
ifs/settings/camera/ >> Camera driver
ifs/settings/display/ >> Display driver
tpa/preset/system/desktop/flash >> flash menus
tpa/system/layout/ >> layout.xml
tpa/system/mutlitmedia/mp/skin >> Walkman 2 skins
tpa/system/preset/multimedia/pe >> frames , clipart etc
tpa/system/preset/multimedia/av >> visualizations
tpa/user >> stock pics and themes…
tpa/preset/system/settings >> startup and shutdown screens !
tpa/preset/system/sound >> all sound files
tpa/preset/system/menu >> the famous menu.ml
tpa/preset/system/fonts >> fonts !
tpa/preset/system/language >> language files (.t9 and .lng)
Note on language >> add more languages .t9 and .lng
Diogo
translate using google translator
then get it from topse
topsony people are now asking for money!
thats bad!!!!
Kshitij
ur firmware version is best!
still wanna download firmware
get from topse
ya
qamaker is part of patching
hi bhuvan,
you didnt reply to my query…
could you please help me out?
Thanks
Vishal
sorry
what???
i got a fbn. file..ths SIM-lock doesnt accept it..what shoul i do?
Diogo
discuss at our support forum
Hi Bhuvan,
This was my query:
Could you please help me? could you please tell me is there any way to unlock w950i by any method on this website?
Thanks
@vishal
ur phone is db2000
n i really dont know that jdflasher really supports patching for ur phone or not!!!
u can debrand it but now unlock untill patching aint supported
better jump onto out support forum!
ask people there
ull definitely get right answer
@bhuvan
thank you..
i jave j100i … how to backup GDFS as it doesnt seem to work with XS++ also i’ve tried pressing 2 and 5 keypad simultaneously … as c key is also the power button.. i can be reached at rgodfan at gmail.com
bro actually i hav messed up every thing… i upgraded my firmware to C902_R3EA038_MAIN_GENERIC_AS_RED52.mbn and after the completion there is no sound,camera is not working… music player is not working.. what to do.. plss help me..
i used a2uploader…
here is the identification
ChipID:C900,EMP protocol:0401
PHONE STATE: “RETAIL”
FLASH CID: 0052
OTP LOCKED:1 CID:52 PAF:1 IMEI:35714902744763 CERT:RED
Model:C902
MAPP CXC article: R3CA038 prg12041731_GENERIC_AO
MAPP CXC version: R3CA038
Language Package:S-ASIA-LEVAN
CDA article: 1208-6217
CDA version: R1A
Default article: 1204-8246
Default version: R3CA038
Operator: 000-00
Elapsed:16 secs.
i reverted back to R3CA038 but i want the latest upgrade.. plss help
hey…!! listen..i did nt make a backup of my phone’s GDFS n nw its showing me the white screen of death…and as it says when i wz checking out how to restore my phone that i hve to contact you..so here i am…PLz need help…reply soon……..cheers
pankaj
post for once
update via seus
Jinz
tried reflashing?
its like the basic step
nothing is helping thn come back
I would really like to say THANKS. I have had so much fun changing firmware to my k550 with your tutos. Now i have a walkman and best of all the joy of doing it! following your instructions was easy. You can tell this is the real deal
Thanks for the grat job!
hi akshayy i have sony w7ooi mobile. with witch software i can easily increase the inbox capacity change the menu, walkman skin, whitelist to blacklist, increase and more clear the volume, increase the cam quality.
will u plz explain me with video tut step by step.
thx
soni
damn!
the answer is simple flashing
its all here
read xs++ guide
learn it
wanna ask a lot something related to guides ask here
got a lot jump to our forum
hey guys pls help me whenever i connect my phone with computer through usb cable .it connects then i select mass strorage then phone charges evry things operate but nothing comes on screen all the files of mem card and phone mem not comes on screen pls help me im unable 2 transfer any files pls reply the sol in my email id [email protected]
thanks in advvvvvvvvvvvvvvv
could someone plz help me?! -.-‘ i got a fbn. file .. i need a MBN., can i convert it?
karan
done use front usb ports
use the ones which are at back
is pc detecting ur phone?
Diogo
mbn for main and fbn for fs
both of them are totally diffrent
r there any eleves pack for w910i plz if there
karthik
like i said no elves for a2 phones!
w910 as a2 phone
hmm bhuvan, but i dont find the firmware for unlocking to the one i need.
Diogo
download from topsony or topse.ru
hey
how do i unlock Sony Ericsson W580i ?
btws i got vodaphone version
thank u
Jit
luk in db2020 unlocking guide
i need the
Main firmware for my phone W700i
pls give me soon…
arun
http://www.topse.ru
use google translator
or topsony.com
i hav a z530i can i flash it??if yes den m confused whether i sud flash both main and fs or only main coz in text instruc. it has been told to flash main not the fs……but in video it told to flash both(it also told dat its recomended) or else i wud get a configuration error……plz help me out guys……………
hi akshay
pls tell me about flashing of K550i bf JDflasher.what is far manager ?hoe to start it ?i cant understand whatever is written in the tutorial.pls help me i m really got frustrated by this hanging problem of my K550i.this is abhinav for u.pls help me out as soon as possible
partho
u get configuration error when u do not upload cda pack!
if u flash only main there is no need of uploading cda cuz its uploaded in fs!
why are u flashing?
abhinav
look in flashing guide
do the way it is given
far is console in which u run jdflahser[just da flasher]
reflashing is simple
is it possible to add the walkman player to my g705 without crossflashing it to w705 or w715… if it is possible how?
thanx bhuvan…….plz help me out in dis also……………..
can i change-
fonts,media player layout,use .swf files,flash menus or vkp files????
thanx ………….
James
nope
partho
can u plz tell me ur phone;s detail again?
i have to deal with so many guyz a day so i hope u understand
well
fonts,layout can be changed on every flashable phone
.swf on every walkman phone and few k series phones
vkp depends if patching is supported
tell me ur phone’s details
z530i………………..thanx……………….
hay guys, plz help me, i hva strange problem, sudennly i couldnot open games folder, n applications folder too, also i cant install new game or something, there is only one error ” Operation Faild” what can i do?
datobai
reflash
partho
flash themes are not supported
patching is there
else is same as i mentioned
Hi bhuvan,
I need the main firmware for my Z710i, it is R1EF001 although I dont know the CID/RED, im assuming it is 49?
If you could please help me it would be greatly appreciated!
Thanks from Canada!
godfather1023
connect ur phone to xs++ and make sure which erom u got
now download firmware from
topse.ru
use google translator
thank you!
bhuvan,
The guides on this website are excellent. I am looking for other websites so I can unlock blackberries, nokia, samsung, lg, etc. Can you reccomend me some websites to get started? I am a student with no experience lol.
Thanks so much!
godfather1023
i really dont know!
we all are here into se only!
lol
Hey buddy, I need some links for the c510 flash menus……..
Hoping for your response
Dinesh
http://topse.ru/files/cat436.html
http://www.topse.ru/files/cat67.html
Hello, i have a C905, it’s been a pig in the past. Now it’s displaying ‘No network coverage’ i’m 95% certain this is a firmware issue, but 5% uncertain as to wether it’s a sim dock problem, i’ve had a little experience in flashin p2k, motorola, so i’m going to read your tutorials for more, i was wondering if you could confirm my thoughts and offer advice as appropriate, thank you for your time in replying
Chris
i can just say try reflashing whole..fs and main and also cda!
or simple update via seus
hi akshayy. i have a k610i and i’ve flashed it before to a k610i but now when i try to connect it to xs++, it doesn’t connect. i turn off the phone, take out the battery, replace it, and connect by pressing the c button. i wait for so long and the xs++ says “error. cannot open the communication port” why is this? plz help any1.
also when oi connect to sony ericsson pc suite it works fine. but not to xs++.
plz get bak to me soon sum1.
jamsheed
clean the port!
also post the whole log
so that i can figure out more
i tried flashing my k610i to w660i. the flashing was successful but when i turned on the phone, the whole screen was in inverted colours. and the phone kept on gettin frozen.
jamsheed
reflash with some other firmware
i guess ur firmware is corrupt
w580i why problem pls help me
Hi, would you like to exchange link to my blog ? 😀
Ryan Isra
contact akshay
or all ask him too!
give me ur blog’s add
hey man, my phone when turning on keeps blinking white before it went black first den white after flashing generic frimware cid49 keep blinkin for a while n denstays white help??
its k510i
Hey
I have a Sony Ericsson w995 that I bought from Germany (I am using it in Canada). It was fine for the past 2 months or so but all of a sudden it started acting weird. When I connected the USB cable to transfer files it wouldn’t detect the phone like it used to, and instead the ‘install new hardware’ screen kept popping up. A few days later, the phone turned off because of low battery, and when I tried to charge it, it wouldn’t charge. When I hold the power button it turns on for a few seconds and a screen appears saying I can’t charge the battery and to insert a Sony Ericsson battery. When I hold the power button again it asks if I want to go to normal mode or flight mode. When i go to normal mode it says “insert correct sim”.
I haven’t dropped it recently and there is no water damage..Also, I haven’t changed the battery or the SIM card as the phone is basically brand new. Is it possible that the phone reset itself to the factory settings?
Anyway, I really really need to get this fixed so if you know how – please let me know,
Thanks!
Hello guys,
I got a white screen during a patching attempt and now the phone won’t start.
I don’t have a GDFS back-up 🙁
Is there anything I can do?
the shutter sounds in my w980 isn’t working.how do i get it to work?
i got a vodafone k800 from uk
updated it from sony erricsson site
now it says ” insert correct sim card”
i’ve researcherd a lot but cant fina a cure
XS++ does not support cuz now its a CID 53
and jdflasher is too complicated….
can u tell me what to do???
HI,
Are there any firmware / patches / application that can be to flash or intall into the W890i to enable the following features
1) How to enable Accelerometer feature on W890i. Is it a hardware build-in component? Any unofficial firmware available?
2) Are there any voice changing application compatible for W890i platform
3) Are there any Location Finder application that can determine one’s location without using built-in/external GPS component or using mobile data charges?
hi..i use K770i..
1st ..after i flashing my hp. diz msg appear “pls insert correct sim card”
2nd .. i load incorrect GDFS..my phone dead now.. i have a true backup.. how to reload back due i can connect my hp using XS or far manager…
Em
was it branded??
clean the battery conducting ports!
also if nothing helps
reflash it
Ava
which phone u have?
kornywho
reflash fs
!
Faizan Khan
use jdflasher!
CL
1 it is hardware dependent
2 like what?
3 sorry man but no!
gee
it is serious matter
discuss at our forum!
what forum in what topic? i dont know.. pls help me..
i cannot connect to XS..when i connect only diz happen
35| Attempting to open the interface…
22:18:35| TURN OFF PHONE!
22:18:35| Hold ‘C’ button on phone and connect phone NOW.
22:18:35| You have 30 seconds…
22:18:35|
22:18:39| Baseband ID: 9900
22:18:39| Protocol Version: 3.1
.. stop right here..
wat should i do? even far manager with SEFS and jdflasher also cannot connect..
far manager only can connect for tpa system…
for the 1st prob = “please insert sim card” ..i think i bcoz phone still locked..
help me…
any solution or other software for upload back my original gdfs…
i already try far manger, XS and Setool.. still can’t..
;-(
how do i get light effects n my k610i which i flashed to w660i?
my radio doesn’t work
hey dear akshay….i have taken new phone sony ericsson G502
i want to change its font and i want to add vibration effect….
also i want to erase my operator logo also…
i am not knowing about which tools are requierd for flash my phone…
can you please give me list of the tools i require with their links so that i can download??
also tell me that is there is a difference between firmware of G502 and other SE phones??
i have heard that G502 does not supports so much flashing…
please help me…
thanking u….
gee
http://www.se-lifestyle.com
this is our support forum
ask there!
shri
no g502 supports nice amount of flashing!
for operator logo and stuff i cant help u out here!
ask me if u dont get something in guides!
look at a2 uploader guide
only a2 uploader is all u need!
uploading layout through a2 uploader and fonts too to fs will get u what u want!
😉
Hi,
Is it possible to remove the Operator Logo from main screen on a SE W900i ?
I’m pretty sure it’s CID49, DB2000.
Thanks
KonArtist
yea
by changing the layout[or by editing it]
needs discussion!!!
jump to our forum and just ask there!!!
ull get the ans
Thanks for the answer.
I’ve been looking around, but I could just find instructions on how to do that for the A200 phones and DB2010 and later phones.
Can u please send me a decent mainfrmwre and fs, coz when i did flashed my phone, my camera button stopd functioning, i guess i download a crap mf and fs. . . Plse send me one
[email protected]
K810i
Db2020
Erom cid 52 red
Cda102568/101 r8a
R8ba024 apac
Ill w8. . .thanku
dennis
look at topse.ru
or topsony
at the end of filename it should be 52 cuz ur erom is cid52!!!!
Hi,
I downloaded custpack for my k810 cid53 mobile which is in .BIN format. How can I flash it in my mobile with far manager?
Which parameters are important to choose custpack in relation with main and FS and CDA?
hey i hv a w200i.i’m in bangalore.wen i try to connect it using setool2lite,ity says restoration file not present.please perform full flashing.wht to do?if i need a main and firmware file,can u plz get it?my model is w200i r4ja011 cid52 db2010.plz help me.i found a lot of firmware n main files in topse.ru.but i dunno which to use.
my antivirus deletes setool2lite,qamaker n jdflasher as viruses.wht to do?i’m usin eset smart security.
mbatiri
.bin format???
it should be some .xip or.rar archive!!!!
contains many files
download it from topsony.com
also u just have to copy those file to
tpa/preset/custom
keerthi s
look at jdflasher guide!
use that
much simple and powerful
dont use seus any time!
use fs acc to ur region
and main which suites ur present firmware or get latest one!
keerthi s
these softwares are made by hackers!
so ur antivirus me detect them like this
add these softwares to trusted list!
or disable ur anitvirus
w580i Maybe the ‘tap’ on the table will also help.. It’s strange that such a new device would have a motor like this go – those motors last a long time…
nivas
whats that?
i followed your tutorial and now my phone is bricked, no flashing lights and setool2lt or xs++ wont recognize it. Its a w610. What do i do next.
steve
what were u doing???
and is red light blinking?
does anyone have an original att branded main and fs firmware??
hello akshay …my k550i got disconnected accidently while updating software using sues….now its not connecting to any softwares like sues ,xs++ ,setool…and the phone is not turning on…the red light is not blinking…please help me…
Tom
google it or demand at our forum or topsony.com
pradyoth
when u connect it pressing ‘c’ key what happens?pc prompts something?
my z750a at&t sony ericsson phone gdfs file was corrupted ,i did’nt backup gdfs in past please help me
thanks in advance
Hi
I have a Sony Ericsson t303 (Vodafone branded). I want to flash it or update the firmware (Sony Ericsson software update does not detect the phone, may be bacause of vodafone branding). Can you suggest a solution.
its got nothing to do with branding. just install usb drivers.
Thanks akshay..Its connecting to SEUS .Can you please tell me how to remove vodafone firmware from the phone (debranding).
Hai akshay:-) how to install tamil fonts support for w610?
i have K618
i try to flashing my phone,I have followed its guidance but after finishing I flashing my phone with w610 flash firmware ,my screen phone be white and cannot be run?
in fact?can my phone use the flashing sony errccson walkman?please help me cause my phone cannot be run
Hi akshay
I hav a s500i n facing problems in installing flash menu themes using jdflasher…
I saw ur video tutorial also bt still m stuck…
Hi …….I have a K790i …can i know how to remove the Fs and Main file system and the install it again in using Far manager….i am able to install the Main file where as a occur is appearing as i tried to copy FS file…….Please Help
When i open XS++ it says my IMEI is K790 wheras my GDFS in K700 what to do
Hi akshay..i have just forgot to take backup of my phone and as a result white screen of death is appearing as i start my phone…….Need help…!!!!!!!!
Nagraj, calmdown and just reflash main+fs+cda.
I am getting confused with the regional codes of Main and FS ..and can u tell me where can i get the CDA file
Hi Akshay..i have K660i with software EROM- 1200-4341 SEMCBOOT R6A013 …
please guide me how to unlock it.. only 3 mobile is working i want to use it on other network..
hey akshayy i have a k610i and its completely dead. i dont have a backup of its gdfs and the problem is i accidently used the wrong backup gdfs on phone. here a log of what its like now:
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition – please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901787868 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:53 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901787868 CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35381301703955
Model:K610i
Brand:AMENA
MAPP CXC article: R1JC002 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JC002
Language Package:S_ASIA_LEVAN
CDA article: CDA102497/89
CDA version: R21A
Default article: cxc1250376
Default version: R1JC002
Network LOCKED
Operator: MULTIPLE
Elapsed:14 secs.
RECOVERY MODE STARTED
if you have any solutions please contact me.
THANKS.
What is the meaning of “flashing” related to sony ericsson phones?I have a Sony Ericsson W705 phone,so would I be able to update my firmware to the latest,even though it is not available with SEUS.
Thank you,
hello………i hav z530i ……….i applied .vkp patches to it and it died but there r many patches 4 my phone but every time i apply sometin new it died den i had 2 flash my phone…….wats d way out cud i b able to patch my phone widout killin it………………….thanx
Hi,
I’m Abhishek. I own a SE K530i.
I wanted to flash it but it is “EROM CID: 53” and not supported by “xs++”.
Then I tried flashing through “Far Manger”, but it contained virus and my antivirus deleted the file (Nortan 2010).
And to check my firmware I downloaded “Babeck”, but it also contained a virus.
I have “xs++ 3.0”, and it did not supported my K 530i with CID:53.
I came to know about “xs++ 4.0” which supports ‘CID: 53’, but its available for Linux only, and I have Vista Ultimate 32bit.
Please Please help me.
I’m very eager to get my K530i flashed.
Reply me soon.
Abhishek
user jdflasher for cid53
if not avail vai SEUS, try to find firmware and falsh manually using a2uploader 🙂
Hi, I was directed to your site by someone telling me I can flash my O2 W995 here (in order to use GPS software, eg GoogleMaps). I don’t see W995 in your list though. Can I use your method for this phone?
i need the k550 CDA102568/108 r6bc002 red53 for fs china red53,
and also the w610 CDA102568/7 r8ba024 red53 for fs c asia red53
icant find any through web, pls make it for me.
any chinese language + input pack for w610 r6?
the download websites for firmwares are not readable
Hello Akshay, its me Ashish from http://www.hybridplanet.co.cc (CID 53) …. remember??
i need little help from you…. i flashed up my friend phone K550i to W610 . there is little error came after flashing….. error is SIM CARD not found or “Please Insert SIM Card” something like that…. & said “Please Contact your Network operator”
what this problem?? what i have to do if this problem happend ???
Thank You 🙂
Hi,
I have a W350a. Its locked with AT&T. I have the unlock code but I came across on a site that I have to enter the code in “UNLOCK (NET) 5” and enter the NCK. But I cant seem to find it. Please could you help out?
Hey Akshay,
I have a W350a but it is simlocked. I have the code but have no idea how to use it, I’d appreciate some help in this matter.
If i try flashing ot vud it work? Its EROM is R4A017. What would u recommend?
shannon, sorry, no idea where to enter that code.
after flashing my K550i it said please insert correct SIM….. or talk to ur Service Provider…. wt should i do now?????
hi akshayy,
I could not find a tutorial for se t715 and what platform it is using, could you please help.
How could i use flash images as wallpaper on my W810i? plz plz tell me.
Hi there, I have a W200i SE & one day my stopped working, it just hung ( froze ). I cdn’t do anything except to remove the battery out & try to restart the phone. After removing the battery & reinserting the battery my phone wont start. Can you please help me to get my phone working as i have a lot of contact & need the phone working badly.. Plz help..
Hey Akshay! I have a w660i
And was like studying.. and put it on the side. I picked it up to check it but then the screen was acting up like….. lines would appear etc like when the menu opened I could not see the icon and like my Background picture would be messed up one second and then it would get fixed and then again messed up. Tell me what to do please!
hi, i flashed my phn k790i but from than i’m facing a prob now. photo buttons above the screen are not wrking as desired.is this the prob of the f/w or customize.xml is not correct?? phn is taking too much time to save the image,around 15-18 sec.
is it due to upgrade to CID: 52 from CID: 49????
my firmware doesnt seem to exist, its the orange wi,red/cid49,r1cb001, prgcxc1250212. whenever i find a file to dl it wont run in qamaker.exe or sim lock patch gen….???? iv tried tons of sites but no luck…..
hey akashay..my phone firmware has crashed ..it keeps turnin off and on for every 2 secs..i badly need to backup the contacts and text messages if i want to reflash the phone..prob is that using mpe it needs the phone to be in phone mode and not in file transfer…but in phone mode it keeps turnin off and on again and hence never connects..please suggest a way to backup my text messages using file transfer..PLS HELP ME!!!
hey akshay i have k790
i want to add walkman 2.0 player to my phone which way is easier pls tell me. The original media player sucks as u cannot play from the playlist. So pls tell me how to add it plss. you site rocks .thank u
hey akshay. i have forgot my passcode for my phone and have been unable to access it. it is a flashed k550i into w610i . its a db2020. how can i find out my passcode thanks. or just access my phone
I Have sony ericsson w610i about 2 years and before one week it started stucking and i had to put of the battery and making reboot to be unstucked.I tried to update it with se update service but it stucked in the middle of the update and after that it doesn’t oppens.Only a red light blinks.I checked the battery but it is ok.So as i searhed i found out that the problem is the erom or gdfs.I am trying to repair it with flashing programms,but nothing.How i can revive it?
SCREENSHOOTS FOR HELP!
SETOOL2LITE
IDENTIFY w610i.png”>http://img202.imageshack.us/img202/1654/w610i.png
UNLOCK/REPAIR w610ii.png”>http://img686.imageshack.us/img686/3912/w610ii.png
JD FLASHER
http://img405.imageshack.us/img405/2744/jdflasher.png
OFLASH ERROR http://img143.imageshack.us/img143/7…sheroflash.png
OFS ERROR
http://img251.imageshack.us/img251/7…severerror.png
Se King
IDENTIFY
http://img5.imageshack.us/img5/8121/seking.png
XS++
IDENTIFY
http://img130.imageshack.us/img130/97/97587919.png
It appears as Z520,but it is W610i!!!
BACKUP GDFS AFTER IDENTIFY
http://img132.imageshack.us/img132/6…backupgdfs.png
FLASH AFTER IDENTIFY
http://img693.imageshack.us/img693/3…ashingmode.png
Hey Ak$hAyy!!
i have a sony ericsson k530i..which i flashed into a w660i .. and now i dunt knw why..but but when i try to start my walkman player or camera..the phone hangs..it freezes..and then i hav to remove the battry..reinsert it and then use the phone!! 🙁
Nor am i able to play any sounds…when i try to..it again hangs !! but when i get a phone call..a message .. or an alarm..then it rings flawlessly..doesnt hang !! i tried reflashing it a couple of times too…but its still giving the same problem…i removed the memory card.. formatted it..then without putting it in flashed it but still nothing happned ! 🙁
PLEASE HELP ME…. URGENT !!! 🙁
tHAnks in advance.. !
Hi every1,,i have k630i..so where i can have the flash theme…i’ve tried but never done well..the menu couldnt work as well…can u help me with this?? ^^
Hello…
Can we patch SE Hazel to increase its sound?
I`m planning to buy a Hazel which has a very low external speaker sound.
hii Akshay
help me plese buddy…
i was in big trouble…. im using a K550 phone…. i converted in w610 last year…. but nowdays it was nt working fine…so i reflash it…. but bymistake i install k810 firmware… & its was not working now… sound & network gone……….. just radio type sound coming from my phone………..
i flash it again…. but still not working…. wt i have to do…….. pls help me asap
@Rahul
thats not good, reflashed both main and fs?
if yes then discuss it at our forum!
😉
dear bhuvan n Akshay, plz help me !!
I have a se k790i..
I want to change the font..i tried xs++ but failed to acess the FS coz it says.,fsx not supported
even i tried making folders..in files_to_upload folder..even this didnt work(i request u to kindly explain this method)
When i use far manager…i get a folder FS but…its blank.
Please tell me any way by which i can change my font.
Thank you.
nitin
post the log here
xs++ log
bhuvan..heres the log
12:13:38| TURN OFF PHONE!
12:13:38| Hold ‘C’ button on phone and connect phone NOW.
12:13:38| You have 30 seconds…
12:13:38|
12:13:39| Baseband ID: 9900
12:13:39| Protocol Version: 3.1
12:13:40| Phone name detected!
12:13:40|
12:13:40| Profiling SEMC phone…
12:13:40| Platform: DB2020
12:13:40| OTP CID: 51
12:13:40| EROM CID: 53
12:13:40| EROM Color: Red
12:13:40| IMEI: 35220601xxxxxx
12:13:40| Phone ID: K790
12:13:40| Region: S_ASIA_LEVAN
12:13:40| CDA: CDA102568/110 R8A
12:13:40| Firmware Version: R8BF003
12:13:40| EROM: R3A016
12:13:40| Ready for operation!
12:15:43| After making any changes with FSX
12:15:43| you must press the ‘Shutdown’ button
12:16:00| After making any changes with FSX
12:16:00| you must press the ‘Shutdown’ button
12:16:02| Sorry, your phone is NOT SUPPORTED
12:16:02| Error: FSX failed.
12:16:02| FSX Shutdown!
12:16:04| Disconnected… Unplug the phone
i think its CID53…?? Now wat shud i do??.
i hav downloaded..the OMNIUS SERVER ..
I heard that..its possible to change the CID53 to CID52..
is it true??
nitin
yeah, its cid53, n that sucks!!!!
look at my erom repairing guide, latest one, it will help u downgrading erom
😉
.but my EROM ..is o.k..!!
will it be safe to migrate to CID52..even if EROM…is functional..
& then will i able to connect it thru FSX in XS++ ??
& will this omnius repairer ..require internet connection??
thank u
nitin
yeah that will require active internet connection!
secondly, there is no risk in downgrading even if ur erom is perfectly working fine
i myself tested that on w580!
works great
🙂
Hi Akshayy, i read this post on your GDFS section:
” In case you have not made a backup of gdfs then there is no way to fix the phone , In such a case Contact Me”, so here i am!
I have a K610i which is dead because i wrote the wrong GDFs backup to it when it was dead, and i dont have the original GDFS backup anymore. if i check it with xs++, it says “imei mismatch”. i’ve been searching for a solution for ages, and i’ve come to you in hope that you will know what to do. your my last resort!!
thanx in advance,
eric
eric
dude ask at our forum
😉
sir i using k310i and want convert to w200i,
may be when i flash it, i do wrong step or etc,
so my gdfs damage..
so how can i solve it?
[code]
Action journal
03:27:31 Identify
03:27:31 Shows detailed information about the connected phone.
03:27:31 Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 32-bit
03:27:31 Application version: 0.07.2279 (beta)
03:27:31 . The action name is ‘Identification’
03:27:31 Selected phone type: K310
03:27:31 Selected connection method: USB EROM
03:27:31 i Instructions
03:27:31 i 1. Make sure the phone battery is charged to at least 50%.
03:27:31 i 2. Switch off the phone!
03:27:31 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
03:27:31 i 4. Press and hold the button C, then connect the cable to the phone!
03:27:31 . The action started waiting for the user
03:27:39 . The action finished waiting for the user
03:27:39 Connecting via Generic EMP USB Flash Device (USB2)…
03:27:39 Device driver version: 2.2.0.5
03:27:39 Entering baseband CPU service mode…
03:27:39 Detected chipset: DB2010 ‘8040
03:27:39 Boot mode: EROM
03:27:40 Sending loader…
03:27:40 Flash chip manufacturer: Intel®
03:27:40 Flash chip ID: 897E
03:27:40 IMEI: 35331501489890
03:27:40 OTP CID: 49
03:27:40 OTP area status: Locked
03:27:40 Product type: Retail
03:27:40 Effective CID: 49
03:27:40 Effective color: Red
03:27:40 Initializing GDFS access…
03:27:40 e Error: GDFS configuration not found.
03:27:40 Turning off the phone…
03:27:40 i Please disconnect battery and cable from the phone!
03:27:40 s Successfully done.
03:27:41 . The action entered shutdown phase
03:27:41 . The action reported success
Additional details
—
62 39 E2 0C 93 0F 05 18 77 5C 99 FC EB 96 13 60
E1 66 51 51 13 5E 2B 26 39 1F 97 0C 3B DA 4B B7
C1 86 2F EC 9D E0 5B C8 E9 76 63 8B 1E 58
—
[/code]
help me sir………….
faiz
use jdflasher
hi Akshay, i m shail from New delhi, my SE k530i says ” another aplication running close……. : when I switch to Camera , how to get rid of it ? plz help
Thanx
hi Bhuvan, i asked ab my SE K530i, another aplication running….. how to get rid of it ?? plz help
shail
reflash ur fs
look for jdflasher guide
or use seus
hey plssss suggest me what to do….m havin SE w810 phone…when i switch on da phone it gives message as INSERT SIM ….what to do den?plss suggest…
HElp i tried writing a patch file but it didnt work…after that my w810i didnt start/charge at all..no red lights nothing…during XS++
10:06:20| XS++ v3.1 (Darwin) Ready !
10:06:20| Executed on Microsoft Windows XP
10:06:27|
10:06:27| Attempting to open the interface…
10:06:27|
10:06:27| TURN OFF PHONE!
10:06:27| Hold ‘C’ button on phone and connect phone NOW.
10:06:27| You have 30 seconds…
10:06:27|
10:06:32| Baseband ID: 8040
10:06:32| Protocol Version: 3.1
10:06:32|
10:06:32| Sending db2010_cid00_prodid_p3l.bin…
10:06:32| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
10:06:32| This is a PRODUCTION_ID loader
10:06:32| Activating GDFS…
10:06:32| Cannot open GDFS
10:06:32| Activating GDFS…
10:06:32| Cannot open GDFS
10:06:32| Activating GDFS…
10:06:32| Cannot open GDFS
10:06:32| Activating GDFS…
10:06:32| Cannot open GDFS
10:06:32| Activating GDFS…
10:06:32| Cannot open GDFS
10:06:32| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)
10:06:32| …using IMEI name
10:06:32|
10:06:32| Profiling SEMC phone…
10:06:32| Platform: DB2010
10:06:32| OTP CID: 49
10:06:32| EROM CID: 49
10:06:32| EROM Color: Red
10:06:32| IMEI: 35657401xxxxxx
10:06:32| Phone ID: W810
10:06:32| Region: n/a
10:06:32| CDA: n/a n/a
10:06:32| Firmware Version: n/a
10:06:32| EROM: n/a
10:06:32| Ready for operation!
10:07:03|
10:07:03| Sending db2010_cid49red_cs_r3a010.bin…
10:07:05| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
10:07:05| This is a CHIPSELECT loader
10:07:05| Activating loader…
10:07:05| Activating GDFS…
i tried restoring GDFS as i have a backup of my tjis phone only but not working please help
hi, very cool your site man,
i have a SE w906i and I want to know
how can I put flash themes on my mobile phone ?
is there any tutorial ?
prasad
ur phone is locked??
if not then try other sim
Sourish
patch needs to be firmware compatible!
and dont play with gdfs just like that!
reflash main
that will solve it
antonio
w906 or w960??
i dont know anything about w906 but yea i know w960 but its not flashable!!! sorry
can not open gdfs and i have never backed up my phone
help me please
hi can u plz help me mod w395…i am really in need of help…
avi
cannot open?? what r u trying to do?any problem u r facing in ur phone?
atul
sorry but w395 cannot be modded! its platform from sagem which cannot be modified
There are 5 writing languages before flashing. And after flashing, one of them was lost (japan). The question, can i add more writing languages or restoring the lost one…?
Thx.
i patched my mobile with setool lite and my mobile not starting
Need a help regarding Restoring the GDFS for w810i R4EA031 DB2010 CID49
I dont have the original backup from the phone.
please sir mail me or sms with this number 8871273540
Alfin
yes, check out language guide and u flashed with different firmware thats why this happened
avi
u dont have to play with gdfs just like that, reflash the main
thank u very much
its worked but my phone say configuration error
and how to remove patches
this is log of recent season
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401742552 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS “READY”
Trying to launch embedded bootloader…
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Flashing upgrade archive:F:\USBFlashDriver\W810_R4DB005_FS_C_ASIA_RED49.fbn
CURRENT FLASH FILE CID:49
File archive consist of 5125 blocks.
avi
configuration error means u have to upload cda pack to ur phone, get one from topsony.com
THANKS WOW ITS WoRKED
ITS LAST QUESTION MY FLASHLIGHT NOT WORKING
AVI
flashing not working?
how? what were u doing?
I MEAN MY CAMERA LED LIGHT
AVI
post ur whole query in detail again! full details
can you help me copy fs data of my se naite to pc?it is db3200 cid53 red fw:r1ha035
Hey !! i need some help regarding my sony ericsson k530i !
i had flashd it to w660i .. but then suddenly its camera and walkman stopped working .. whenever i pressed the camera key or the walkman key .. it got freezed there .. i had to remove the battery and restart the phone then !
i then sumhw searched for k520i firmware again and re-flashed it ! now the music player is working .. but camera still hangs !! please help me out soon .. tell me what to do !! 🙁
hEy !! i have a k530i .. i flashd it into w660i .. but sudnly its camera and sound stopd working .. whenever i press the camera or walkman key it gets hangd ! i flashd it bak to k530i now .. the music player and audio is working but the camera is still not working .. please help me out !! im in a big mess .. !! teme what to do !!
thanks ! 🙂
hi frnd my phone W595 is not working prpperly…it cant accessing network…so can u pls help me ??
I just bought a Sony Ericsson Cedar. This model should support HSPA for 850/1900/2100 frequencies. However, this one does not seem to have 850 and 1900 ‘turned on’ (I assume it is merely a gdfs setting turned off when delivered to customer in Europe or wherever). I want to use this in the U.S. So, I need it to be able to support 850 and 1900 frequencies. Is it indeed a gdfs change that needs to be written? If so, what tools and exact instructions do I need to do that? Tools I have: Debugmux (for logging), EMMA, SEUS. I think these tools cannot help with getting my frequencies enabled, correct? please assist. thank you in advance.
dude i wanted to change the font in my k770, did it as you said, renamed the font to the original ones, turned on my phone but it was all rubbish, i had to revert to the original one, what should i do? i just couldn’t find the xml file for my downloaded fonts, what to do
Hey Akshay,
Its there any way to update my Aino with Mollinas Acoustics, I cant open the file system of my phone, tried with the latest version of FAR with SEFP2
Please post your suggestions.
Thanks
I have a problem in unlocking my SE K800i CID53 using jdflasher. After the completion of the step-2. I cannot run executor from Games because I cannot access its filemanager menu. This is because when i turn on my phone with sim card it displays “Insert Correct Sim Card”. And I do not have ANY SIM CARD for which it is locked. Is there any method to access the phone’s filemanager without sim card inserted
hi, I just flash my Sony Ericsson W595 with a2. it says block 84340000/00010000 not accepted; error 3b.
now i can’t turn on my phone. i think i made a mistake. pls. try to help me
i need k800i firmware R8BF003 PLZ CANT FIND ANYWHERE HOW TO GET IT PLZ GUIDE ME
Kindly need help, I cross flashed k530i to w660i with FAR+JDF now i am getting INACTIVE SIM, i tried Reliance, Cellone, Aircel and Airtel Sim. it gives same error INACTIVE SIM, Kindly help me, Which is the correct FS, MAIN and CDA for my Phone, I am residing in India, Chennai.
22:31:54 Selected phone type: W660
22:31:54 Selected connection method: USB EROM
22:31:54 i Instructions
22:31:54 i 1. Make sure the phone battery is charged to at least 50%.
22:31:54 i 2. Switch off the phone!
22:31:54 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
22:31:54 i 4. Press and hold the button C, then connect the cable to the phone!
22:31:54 . The action started waiting for the user
22:31:58 . The action finished waiting for the user
22:31:58 Connecting via SEMC USB Flash Device (USB7)…
22:31:58 Device driver version: 2.2.0.5
22:31:58 Entering baseband CPU service mode…
22:31:58 Detected chipset: DB2020 ‘9900
22:31:58 Boot mode: EROM
22:31:58 Sending loader…
22:31:58 Waiting for loader response…
22:31:58 Flash chip manufacturer: Intel®
22:31:58 Flash chip ID: 897E
22:31:58 IMEI: 00460102232429
22:31:58 OTP CID: 49
22:31:58 OTP area status: Locked
22:31:58 Product type: Prototype
22:31:58 Effective CID: 53
22:31:58 Effective color: Red
22:31:58 Initializing GDFS access…
22:31:59 Reading from GDFS…
22:31:59 Phone type: W660i
22:31:59 Phone branding: Customized
22:31:59 MAPP CXC article: R8BE001 prgCXC1250446_GENERIC_FY
22:31:59 MAPP CXC version: R8BE001
22:31:59 CDA article: CDA102804/103
22:31:59 CDA version: R1A
22:31:59 Default article: cxc1250839
22:31:59 Default version: R8BE001
22:31:59 Language package: EUROPE_4
22:31:59 The phone is not locked to a network.
22:31:59 Turning off the phone…
22:32:00 i Please disconnect battery and cable from the phone!
22:32:00 s Successfully done.
22:32:00 . The action entered shutdown phase
22:32:00 . The action reported success
Additional details
—
0B B0 3D F3 EE 00 C6 DF 5C 3D 02 0B 38 E7 7E 77
AC 5B 94 8E 50 8F CA FF B4 7C 8E C5 D8 C9 1E 2E
12 07 56 AD 60 D1 5A 3F C4 29 09 E6 DF 0C
Please update the picts, they are deleted in here
http://www.akshayy.com/sonyericsson/others/extracting-an-fs/
“Download XS++ , Setool 2 lite and Far Manager from that site our 4shared folder !”
do we need to download all of that or just one?
cause i only download XS++ will it work? im new here please help 🙂
hi i have a sony ericsson w200i and w80i.but i don’t like using accesories to listen to radio.is there any technique so that i can llisten radio without using them..
hey can any one tell me wats the server address for instant messaging in sony
i tried with pop.gmail.com and imap.gmail.com
but its showing error
pls help me out soon
I’m a fan of Sony Ericsson. I have a se c903 mobile. Recently the ribbon of it has been replaced due to a damage. But the new ribbon is broken from less than a month. Then I tried to repair, but it didn’t work. Now, when I connect to the charger or USB a red light is continuously displays through the camera button and the mobile is not starting. I tried to connect to a2uploader, Omnius for SE, etc. nothing worked for me. Help me SE doctors… please give me my lovely cute se c903 girl back
Go tis whit a Sony Erisccon Hazel J20i ?
Can I use my Sony Ericsson J20i Hazel install flash menus? Please, please help me. Thanks
I need help flashing my SE spiro
i have tried many programs
i have Windows 7 ultimate 32bit,
it says open port ok
and an error like code0x53
please dont ignore me if this topic is dicused in another forum,
i used XS++ and A2tool , those doesnt helped me
any suggestion?
how to change the startup logo of my w705 phone.
hi i am shameer and i bought a se w995 tmobile handset from
uk and now i am in india and i need to unlock my phone fr free of cost
can somebody plz gve me step by step instruction to unlock….
.swf flash menu doesnt work when original menu is replaced by another menu.ml?
can u tell why?
i am using naite i am not able to delete the crap games with far manager please help me someone