Restoring the GDFS (Writing GDFS)
IMPORTANT NOTICE: Don’t Write GDFS simply just because something happened and your phone is not starting. Its written only if gdfs is corrupt.
If your phone for some reason behaves abnormally and fails to start and you get a white screen of death when you try to start your phone, then its time to restore the backup of the gdfs you had made. In case you have not made a backup of gdfs then there is no way to fix the phone , In such a case Contact Me.
Go through the GDFS Backup Post once if you have not read it.
Do Not Unnecessarily write a GDFS if your phone is working good.
VERY IMPORTANT: Your phone GDFS is unique to your phone. Writing a GDFS from any other phone will permanently damage your phone beyond repair. You must always write a gdfs that came from your very own handset. Lets say you have a w610i and you try to restore a gdfs that came from your friends w610i then your phone is in big trouble. Hence make sure that the GDFS that your writing is your own GDFS.
Download XS++
Charge your phone battery to 100%
Click connect phone in XS++
Shutdown and reinsert battery
Connect Phone holding C
In Configuration Select GDFS.
Select the gdfs to restore. Click Write GDFS.
Reinsert battery Start Phone.
Your phone must now work flawlessly
Picture Credits to Rekoil of Se-nse
Regards
Akshay
hello Aksay i do need your help. there is white screen of death appear on my k550. i think because of gdfs. i haven’t got backup of gdfs so like you said no way to fix the phone. Can you help me please?
yes bro.. no way to fix it. you can try to do a full reflash of main and fs. .. !
i think ur phone is in warranty .. go get it replaced fast. time is running out.
thank you! i hope you can help me more in case you get some new ways.
Hello Akshay. I had some problems when trying to unlocking my s500i, maybe the battery was gone in between the process. The thing is that now my phone is dead, I can’t turn it on, charge it, etc. Fortunately, i had backed up de GDFS, so with XS++ i want to restore it. But is very difficult to connect the phone to the programme, and when i’m already connected, the process called “Activating GDFS…” is taking more than 20 minutes. Is that normal?
the phone does not start .. what does that mean ??
does the Red light at the infrared port blink when you try to start your phone ?
Tithsya .. unfortunately there is no other way. ! sorry .. GDFS is something important
i don’t know if any paid tool can repair your phone
Please erase my comment afterwards.
i hav updated my cam driver….how can i reload d original cam driver..one which came preloaded?i hav back up d gdfs…
download the FS of your phone extract it and in it you will get original cam drivers of yours
hey akshay im getting an error which says “configuration error.please check network operator or service centre.” i tried to flash it again but it still gives me the same message.
If once gdfs backup has been done then every time when t
If once gdfs backup has been done then every time when the phone is to be connected with xs++ then gdfs bacup is to be done or not neccessary
yeah dude i hv mentioned clearly .. do it only once ..
Thank u Akshay.I want the next tutorials(v2) .As soon as possible please publish that.
Hi. I tried to use SE update tool. As a result when the phone turned on the welcome screen appeared then the setup progress bar with the message ‘Please Wait’. The problem is my k550 stucked at this step. You’ve got any idea? Good luck!
Oh i forget to tell you that my k550 got problem because it was flashed with k800 firmware. By the way would you mind sending me complete firmware for k550 (Fs, m, custpack…). Cos i want to have reflash.
The ‘Please Wait’ screen is because the phone is applying a customization xml file. It might take long, so I suggest you should wait for a few minutes. If it isn’t working then, reflash main and FS, and upload a cuspack. You can find K550i’s stuff here: http://www.thinkdigit.com/forum/showthread.php?p=628213#post628213
How can i use Flash themes on my W610i without flashing the FileSystem
hi man !! you can use flash themes on w610 without fs flash.
but it must be debranded or flash menus must be already working
akshay i have taken backup of my gdfs of my older firmware version.n now i m using new firmware version. so is it require to take backup of gdfs again or older one will work????????? thanx in advance.
^^ its said every where … GDFS backup only once ! in phone’s lifetime !! 😉
i have a sony ericson unlocked by gdfs
that’s good !
please help me i have a k800i and i tried to unlock it using he se tool 2 software when i started the phone back up again it said “configuration error. Please contact your network operator or service centre.” I have restored the gdfs but the same message pop’s up. PLease ihelp me what do i do. I just want the phone to go back to normal. Please… i need the phone to work
i knoiw there is an nulcok/repair function on the se tool 2 software do i use that? please help me im desperate
What is a Sony Ericsson unlocked by GDFS?!
@pav: You shouldn’t just write GDFS whenever something goes wrong. Configuration error happens when you don’t have the necessary cfg files. So try to upload a custpack, if it isn’t working, then reflash FS and then upload the cust_pack.
Also if that doesn’t work, do full reflashing.
SeTool 2 Lite doesn’t have those functions…. (only full version)
Thanks for the help phone is working 100% now. Cheers. I used the Xs++ software i cnt remember exactly what i did now but its working fine.
By the way what exactly is a cust_pack.
Thanks again
Custpack is a set of files, most importantly, scripts. The customize.xml is applied and written into the GDFS when you start your phone after you flashed FS. It configures the phone. Sets what languages it supports, what time is the earliest that it should support etc.
hello again, after successfully unlocking my phine i have found the following problems:
. when i try to download applications from the mobile internet (WAP) an error message keeps popping up saying “operation failed”
Is there any way to fix this problem and is it becasue i have unlocked my phone maybey i have done something wrong?
. The second problem is that i downlaoded the application from my pc and installed it into my phone via bluetooth becasue i couldnt use the mobile wap to downlaod the application
the application i downloaded was windows live messenger and when i answer yes to allow the phone to access the internet it keeps saying server timed out.
Does anyone know how to fix these two problems… and has anyone else come accross these problems?
ps.. the phone is a k800i
I guess you reflashed FS and the custpack you used does not have the right settings for Wap. Try to configure it somehow, use google and ask flashers from your country or download the setting files from a phone from the same country with the same provider… Strange, because when I flashed, my new WAP settings worked ok…
download settings from sony ericsson website !
it should work then fine !
this is no way related to unlocking and stuff !
i have allready downlaoded the settings for the network from the sonyericsson website and am still having the same problem. I have done soem research and looked into some forums in actual fact this problem semms to be very common on k800’s after unlcoking them using the setool 2. some people have said to reflash the phone but i dnt want to risk wrecking my phone again. How can i install a different cust pack?
Can you run me through the steps…
Another question… i have though about using SEUS on my phone which might get the settings to work but i wanted to make sure by asking
what will happen if you use seus after flashing and unlcoking your phone via patch and if i do use it, will my phone become locked again??
Hi Akshay,
I want to debrand my phone but i also want to make sure that i can put it back branded if i need to replace it with warranty. Will writing the GDFS put the original firmware back on or do i need anything else? Please help me. Thnx in advance.
pav. Sorry for late reply. To install a different cust pack, you should reflash FS. Don’t use SEUS, because it will probably update the phone to CID53, so it will be useless, not flashable.
Luv. I’ve read somewhere that they can spot it anyway, so it’s no use trying. You will need the custpack of your service provider, or you need to hack in the file system and download all customization things. Also acquire the same firmware version as it is now. Though I think it won’t be possible, becasue your phone might be a CID51, and when you flash it, you update to CID52, and you won’t be able to revert it back. Or maybe by restoring a GDFS that was read before flashing… but how?…
So I doubt you could make it without losing warranty.
Oh thats not good then. What are the advanages of debranding it anyways?
It depends on the phone. You can delete the provider-related stuff from the phone at first. Remove limits as you can’t apply flash themes (if the phone would be capable of doing so). The real good thing about all of this isn’t the debranding itself, you can apply patches that can change almost everything in the phone. My favourite patch is the one that causes a flashing light at the bottom of my phone.
What do you mean by flashing light at the bottom of your phone? By the way, where can I find all these cool patches and how do i install then? Thank in advance!
My K550i had a LED on the back side. That is flashing when I have a call. Patches are from mobilefree.ru.
Ok thanks, but is there an american website to find patches?
I’m trying to flash my s500 but its saying header type: unknown/damaged. what do i do?
It is probably wrong CID number. Check it in phone info.
What is a GDFS? What would happen if i restore it?
GDFS is a set of values. Some of them are just for storing tasks and calendar, but others are necessary to start the phone. If those get damaged, the phone is bricked, unless you restore a backup of that GDFS, or make a hacked one.
And there is no american site, but we are making a site where we are collecting patches. http://seflashing.extra.hu/ but we need help from users all over the world. 😀
Hi Akshayy,
I have flashed a P1i, that I bought from Hong Kong to GW1 using XS++, then updated software with SEUS.
I started to have problems in receiving and getting calls, so I restored GDFS (my backup), without flashing the phone. However, now my phone displays two organizer codes and two CDA’s as below:
Phone:
CXC162037 R9J005
Bluetooth:
CXC162143 R1D
Organizer:
CXC162156 R6F41
CXC162108 R6F41
CDA:
CDA162024/74 R10A
CDA162022/1 R6F38
I still have problems with receiving calls. Can you help me to restore back to original (to HK with my backup GDFS)
Thanks a million!
You mustn’t use SEUS after using XS++. Besides reflashing main and fs probably fixes this problem, but I don’t think that this is too much of a problem, you can only see this in secret menu…
sorry i don’t know in case of smart phones
you should try to reflash main and fs .. a
Hi i bricked my w810i and im trying to write my GDFS back. Its not working cuz its stuck at sending applet csloader. What do i do?
Is the red light blinking?
Nope. There’s no red light.
23:01:35| Baseband ID: 8040
23:01:35| Protocol Version: 3.1
23:01:35|
23:01:35| Sending db2010_cid00_prodid_p3l.bin…
23:01:35| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:01:35| This is a PRODUCTION_ID loader
23:01:35| Activating GDFS…
23:01:35| Cannot open GDFS
23:01:35| Activating GDFS…
23:01:35| Cannot open GDFS
23:01:35| Activating GDFS…
23:01:35| Cannot open GDFS
23:01:35| Activating GDFS…
23:01:35| Cannot open GDFS
23:01:35| Activating GDFS…
23:01:35| Cannot open GDFS
23:01:36| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)
23:01:36| …using IMEI name
23:01:36|
23:01:36| Profiling SEMC phone…
23:01:36| Platform: DB2010
23:01:36| OTP CID: 49
23:01:36| EROM CID: 49
23:01:36| EROM Color: Red
23:01:36| IMEI: 35906400xxxxxx
23:01:36| Phone ID: W810
23:01:36| Region: n/a
23:01:36| CDA: n/a n/a
23:01:36| Firmware Version: n/a
23:01:36| EROM: n/a
23:01:36| Ready for operation!
23:01:41|
23:01:41| Sending db2010_cid49red_cs_r3a010.bin…
23:01:43| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
23:01:43| This is a CHIPSELECT loader
23:01:43| Activating loader…
23:01:43| Activating GDFS…
hey you try to reflash fs and main ! then try gdfs operation ! regards
i hope this works out
many phones have same problems
what’s up with your phone ? its not starting ??
or you get WSOD at startup ?
Also using SeTool 2 lite follow this tutorial
it should fix the EROM…
try this after flash of main and fs
http://www.akshayy.com/sonyericsson/tutorials/red-light-blinking-dead-revive-it-to-life/
It wont start. Dun even have wsod. But i’ll try to reflash when i get home from skl. Thx so much..
I reflashed the main and it worked!! Thank you so much!! Btw ive looked at other websites and this is the most easiest to understand..
nice
that was obvious.. i thought you had already tried the option of relfash !
Hello Akshay and John
i had taken firmware and GDfs backup of my phone SE W810i with following specification
Platform DB2010
OTP CID: 49
EROM CID: 49
EROM Color: Red
IMEI: 35906400xxxxxx
Phone ID: W810
Region: S_ASIA_LEVAN
CDA: CDA102494/139 R1A
Firmware Version: R4DB005
EROM: n/a
But after backup phone has become dead. For backup i used the SEtool2lite 1.11 and for
GDFS backup used XS++ 3
Only different thing i had done is
i clicked Profile Phone under Profile: ( This is in GDFS Operations XS++ 3).
Now i have many backup binaries.
Full backups from SEtool with start 40040000,44000000, 40040000 all with length 00020000, 02000000.
Phone is detected in XS++ and SEtool but do not turn on.
tried gdfs restore 🙁 didn’t worked for me).
No blinking on IR LED.
Then i tried to take gdfs backup after restore option, new file size is less than 100 kb around 88 kb but the original backup file is 101 kb.
What are my options?
Also please confirm the start address and length of main firmware and FS
Thanks in Advance.
Try like what i did, reflash the main. Might work.
http://sek750.extra.hu/letoltes/?path=./Firmware/W810/
How do i reflash main?
i mean with what software application and what is start address and also what is the length?
what format is the main and fs files?
i have binary backup with me.
please help me..i have backup my gdfs,but when i want to restore it stuck at ‘activating GDFS’..
now my phone wont start..also no red light blingking..what should i do??
someone please help me!
well flash your FS and MAIN !!
download them from may be here
http://www.sek750.extra.hu/letoltes/
that’s all
then again try
i found on the website for my w850..
but my firmware version is R1ED001
is it possible to flash it with R1KG001?
Yes sure. But if you are using a different fw version, you must reflash both main and fs, because they might be incompatible (different versions). 😉
~~~~~~~~~~ Custpack information ~~~~~~~~~~
04:42:31| Custpack: APAC (CDA102568/101) (W850)
04:42:31| Generic(non-branded) custpack: Yes
04:42:31| Allowed languages: en, ms, id, tl, vi, zs,
04:42:31| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
04:42:34|
04:42:34| Sending db2020_cid01_prodid_p3j.bin…
04:42:34| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
04:42:34| This is a PRODUCTION_ID loader
04:42:34|
04:42:34| Sending db2020_mem_patcher_cid52_r2a006.bin…
04:42:34| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
04:42:34| This is a MEM_PATCHER loader
04:42:34|
04:42:34| Sending db2020_cid52red_flash_r2a005.bin…
04:42:35| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
04:42:35| This is a FLASH loader
04:42:35| Now flashing firmware main…
04:42:35| Flashing c:\documents and settings\apik\desktop\w850_r1ed001_main_generic_eu-emea_red49.mbn
04:42:35| Header type: BABE
04:42:35| 455 flashblocks
04:42:35| Binary acknowledge failed with: 89
04:42:35| Failed
04:42:35| Binary acknowledge failed with: 68
04:42:35| Command: Error 0x68
04:42:35| Failed sending flashblock 1. Returnvalue 0xD0022D00
04:42:35| Finishing flash
04:42:36| Binary acknowledge failed with: 02
04:42:36| Failed
04:42:36| Failed
04:43:12| Error: Flashing failed
04:43:12| Disconnected… Unplug the phone
04:43:17| Shutting down…
anyone?help me please….why it is failed??
hi, i have the sony k550 i was trying to do that flash to change it to walkman-cybershot while i made a mistake and i didn’t choose the right mobile… anyways now my phone when i start it it says insert a correct sim card, what do i hav to do? please help me, and please add me in msn mine is [email protected] if any1 can help me please! thank you all
peti .. not a problem
phone will work if different and fs and main.
aksipan try to repair your EROM…
http://www.akshayy.com/sonyericsson/tutorials/red-light-blinking-dead-revive-it-to-life/
Khinjare…. Unlock your phone… !! its locked now
http://www.akshayy.com/sonyericsson/tutorials/unlock-db2020-se-phones/
Hi. I’m in big trouble here. I tried to flash my K810 with a Walkman patch using SEtool2 Lite, now the phone won’t start at all. I hold the power button but nothing’s happening. I used correct firmware, I’m sure of it. Correct color and stuff. Although it was a FBN file, not MBN as the tutorial had said (oops). I have a GDFS backup which I made just before doing all this. I’m trying to restore it but neither XS++ nor SEtool2 1.11 would do it. XS++ just hangs doing nothing for dozens of minutes straight, SEtool2 refuses to restore, sais “CSloader refused to start GDFS services,error is:29 failed, that is fatal”. So what can be done here? After all I DO have the GDFS backup.
why is my filesystem consist only ifs?
where is the tpa?what happen here?
Does FAR Managerdetect thrm?
why the hell do people want to restore gdfs ?
sergage.. reflash Main.. then FS… then flash CDA
http://www.akshayy.com/sonyericsson/tutorials/flash-firmwaredebrand-with-xs/
file system consists of all tpa, ifs queue, system
Well I can’t flash anything now, cuz i have CID 53 😀 . Ain’t it funny?
lol….. now nothing can be done..
JD Flasher Support CID53 .. but its too confusing.. i am soo confused what loaders to use … i will have to manually find out and set the flash loaders and put up the tutorial here.
I f’ed dred i tried to patch my w610i and now i flashed it and i cannot locate my gdfs. Is there really nothing that i can do?
Like reflash your main. Patching can only f*ck up main, not GDFS, however, most beginners think that then they need to restore GDFS.
i got my phone to work but now it blanks out
after a fe seconds wat shyould i do then? And thanks for ur help on the first problem
It may be the battery. But if you have modified stuff in the phone’s file system, then you will have to reflash FS and custpack. If these won’t work, you will need a hacked GDFS. :S
ok how do i do those and if needed were can i get a hacked gdfs
http://www.akshayy.com/sonyericsson/tutorials/flash-firmwaredebrand-with-xs/
Long ago I’ve found such gdfs hacking tutorial. It was like get the gdfs of a phone that is identical to yours, and apply a few scripts in SeTool2 and then it should be all right. But I don’t know where it was. :S
whats wrong with you guys, the tutorial is absolutely to the point, why dont you guys read the tutorial. flashing the firmware is like flashing the bios on the motherboard. its not childsplay, its not software installation. follow the tutorial point by point. write down the procedure. try to learn it by heart. you will have no problems. 100% battery means 100% battery. backup gdfs means backup gdfs. its like an order, so obey else you end up with a dead phone.
dear akshayy, can i wipe out the main and the FS and then the cust pack of my fone leaving the gdfs intact so that its open to further firmware flashing. safely ? eg. i want to write some other fones main,FS,cust pack (experiment), then if it conks, rewrite the original main,FS & cust pack ? my wifes got a k550 too. ca i backup main,FS n cust pack of her fone to my laptop and then experiment ?
thanks foryour help guys
i did not get you…
gdfs is left intact by XS++ and SeTool 2 lite
but using Far Manager you can rip the gdfs also if you know the GDFS Address in flash chip that is.
you want to try to flash k550 to other phones ?? did you say that ??
First… you can’t do backup of Main/FS/CDA which is already in phone.
instead you download k550 main and fs and flash it back in k550 after your experiments.
most of the times nothing happens. some times EROM will die when bad cross flash happens. that can be fixed
writing bad/alien gdfs also kill EROM. again first restore EROM then immediately write back original gdfs without starting phone.
So I can never kill my phone?:O Not even with flashing totally different fw?:O
yes most of the times.
akshay.. i do need ur help… i had read my gdfs but in the end i’ve got a message said thats is fatal bla bla bla … and my phone cant starting when i try to tunr it on… i already have a backup for gdfs, then i try to restore backup … said “
said “sending applet CSloader ” but it takes so long … is that normal or the progres it doesnt work ??? pls i need ur help
newbie that’s bad. use XS++ and try to reflash FS and Main and cda. which phone ?
check out flashing tutorial with xs++
hi,
I recently ‘patched’ my k800i with this command
gdfswrite:000000AC12
in SEtool. I believed that that would make my phone work in the 850 Mhz band (how foolish)
While the software info does SAY its 850Mhz enabled. It really isn’t. Tried and tested.
would you recommend I restore my backed up gdfs to overwrite this? i’ve not patched or done anything with the phone since this 850 mhz ‘patch’.
Why bother restoring? Knowing that configuration still sits in my phone is a constant reminder of my stupidity = )
thanks
Try restoring.
Am not sure if those values were also backed up
hi…
today i did flashed into my K810i….
but…unfortunately when i tried to on my K810i,itz juz came blinking n blinking….wat should i do?
what exactly did you do ?
and why are you restoring your gdfs.
what’s the problem…. ??
actually i’m trying to do patch into my phone vkp….but itz became blinking when i’m trying to switch on my phone…..
i dun y?i also did restore my gdfs…itz still same..
2) why i cant played the game when i’m trying to open it?itz keep said “Operation failed”?
now reflash main and fs and cda.
see the xs++ flashing/debranding tutorial
And backup contacts before doing so… 😛
I don’t know if this helps anyone or not… but I found it long ago and then I couldn’t find it for a while, and now I stumbled into it:
http://myforum.lasyk.net/showthread.php?t=39486
It is about fixing dead GDFS, without backup.
PLease can you help? I have this problem and i have forgotten to make a copy. My mobile ist w810i
You have ‘this’ problem? Then I suggest reflashing main, fs and custpack.
Any manual? And is it easy? I’m kinda noob
just backup the gdfs now. that’s all.
It’s teh corrupted one. WHy would i do that if it’s not working?
While trying to fix it, you may screw it up even more, that’s why it is better to have a copy of a corrupted GDFS that to have a dead phone.
Before hacking GDFS, did you try reflashing main and fs? Many people don’t try it, but it isn’t the solution in most of the cases.
Mino !! that sucks !! your gdfs is gone ??
how can you say that your gdfs is gone ??
also which phone. i hope its a db2020 .. then i can help you fix that dead phone … provided some brings you a gdfs of same phone. this is risky.
hey.. can anybody help me.. i’m writing a patch at setool lite when a lights go off(power off) now i cant open my phone.. i have forgotten to back up the gdfs.. pls help.. wat should i do? i have i w810i
hey.. can anybody help me.. i’m writing a patch at setool lite when the lights go off(power off) now i cant open my phone.. i have forgotten to back up the gdfs.. pls help.. wat should i do? i have i w810i
i mean turn it on..
23:05:52| XS++ v3.1 (Darwin) Ready !
23:05:52| Executed on Microsoft Windows XP
23:06:00|
23:06:00| Attempting to open the interface…
23:06:00|
23:06:00| TURN OFF PHONE!
23:06:00| Hold ‘C’ button on phone and connect phone NOW.
23:06:00| You have 30 seconds…
23:06:00|
23:06:06| Baseband ID: 8040
23:06:06| Protocol Version: 3.1
23:06:06|
23:06:06| Sending db2010_cid00_prodid_p3l.bin…
23:06:06| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:06:06| This is a PRODUCTION_ID loader
23:06:06| Activating GDFS…
23:06:06| Cannot open GDFS
23:06:06| Activating GDFS…
23:06:06| Cannot open GDFS
23:06:06| Activating GDFS…
23:06:06| Cannot open GDFS
23:06:06| Activating GDFS…
23:06:06| Cannot open GDFS
23:06:06| Activating GDFS…
23:06:06| Cannot open GDFS
23:06:06| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)
23:06:06| …using IMEI name
23:06:06|
23:06:06| Profiling SEMC phone…
23:06:06| Platform: DB2010
23:06:06| OTP CID: 49
23:06:06| EROM CID: 49
23:06:06| EROM Color: Red
23:06:06| IMEI: 35906200xxxxxx
23:06:06| Phone ID: W810
23:06:06| Region: n/a
23:06:06| CDA: n/a n/a
23:06:06| Firmware Version: n/a
23:06:06| EROM: n/a
23:06:06| Ready for operation!
this iis what it shows.. what should i do?
JC reflash main and fs.
see xs++ flashing tutorial
where can i download the main and fs for w810i?? tnx in advance ^^
see download page at this site. 😉
hi akshay my k810 is re blinking led i send it to service center they told me EROM must be chnaged and changed it after changing no led blinking but white screen blinking.
i tried to flash the blank Erom XS++ told me flash main & FS is done . but phone is blinking white screen. and i tried to write GDFS in XS++ write Activating GDFS . i wait for 5 hour and nothing . stop the process program said That is Fatal. please help me.
Can’t you take it back to the service center guys? Not flashing gdfs seems to be erom failure, but that is not likely, because it was fixed recently. If you can’t take it back and you have a backup of gdfs, you can try connecting the phone to pc holding 2+5. Also try using the SeTool EROM fixing method in the red light tutorial.
i’m in iran. Iran Guarantee not like another countries .
i do that but this log :
Can’t get packet properties .
wrong response , break.
failed , that is fatal
Elapsed : 371 secs.
wat do u mean by “Iran Guarantee not like another countries .”?????????????????
when i sent the phone to guarantee service . he said to me u drop that phone or take off battery in working state . .. . in your phone state not in gurantee .
Is that the 2+5 or the erom fixing thing?
Can’t get packet properties .
wrong response , break.
failed , that is fatal
Elapsed : 371 secs.
hi there man.. i have a big problem with my w810i
i`m from romania.. and my w810i doesn`t start
very big problem.. when i put it to charge he doesn`t start but the IR led is starting to blink.. you know.
when i start the xs++ it shows me:
Sending db2010_cid00_prodid_p3l.bin…
18:57:45| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
18:57:45| This is a PRODUCTION_ID loader
18:57:45| Activating GDFS…
18:57:45| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:????)
18:57:45| …using IMEI name
18:57:45|
18:57:45| Profiling SEMC phone…
18:57:45| Platform: DB2010
18:57:45| OTP CID: 49
18:57:45| EROM CID: 49
18:57:45| EROM Color: Red
18:57:45| IMEI: 35906300xxxxxx
18:57:46| Phone ID: W810
18:57:46| Region: ›WvÐA
18:57:46| CDA: ›W¢ÐA ›W¢ÐA
18:57:46| Firmware Version: ›W‰
18:57:46| EROM: n/a
18:57:46| Ready for operation!
it flash my main and fs but he doesn`t want to start
i dont have a backup gdfs.. what i showld do .. ?!
thank`s
Try the red light blinking tutorial.
hi akshayy…wat s GDFS.can u explain it briefly..plz..plz..wat s use of flashing d mobile and how to flash it…?
gdfs is a set of variables. Some of them contain your data, like calendar, tasks. Others are necessary to start the phone. When those get damaged, you can end up with a bricked phone, though in most cases it can be brought back.
Flashing mobile – debranding, unlocking, custom camera/display/sound drivers, custom menu and layout, elves etc…
hi akshay.. i loses my font.. how? i think i deleted something in tpa/preset/font…
can i replaced it.
hi akshayy..i tried flashin ma k550i to a w810 i ..i had a GDFS backup..but after flashin it when i switched on da fone..i got a white screen..yried restorin da GDFS..but even afta doin that i get da same white screen..what do i do..plz help guys..!
@wan: check the files there fonts.xml, and two ttf files, Sans-Serif. If you deleted them, follow the tut here to unpack an fs (which you can get at sek750.extra.hu). Get the files from an unpacked fs.
@sreekanthkrishna: nice name.XD W810?!! Stupid thing, totally different hardware architecture. Don’t you mean W610?:O
If W810, then the EROM is damaged, I think. Connect to SeTool2, and click “unlock/repair”. That should fix it. Then reflash main.
hai i am facing a problem while uploading acoustics, i deleted some file in that folder.now ican only hear music through call speaker im using W580i no sound through speakers how can i restope my phones sound please help me
Gerad you had problems right.. ??
you emailed me right ??
now to fix your phone sound reflash FS and CDA/Custpack with XS++.
http://www.akshayy.com/sonyericsson/tutorials/flash-firmwaredebrand-with-xs/
help i have bricked my girlfriends k810i with the setool2 as it didnt save the gdfs. please help with a hack of a different gdfs. how do i do this?
your help would be much appreciated as i am going to loose the ability to father another child if you know what i mean!
thanks
tony
dude let me tell you … gdfs in left untouched in all cases like unlocking flashing etc
now just backup your gdfs. no big deal .. it has not changed.
some people press random buttons. they are crazy and they seriously need gdfs backup.
now just REFLASH your phone with XS++ and phone should work well.
Tell me what’s the problem, you are not telling anything. Neither you show logs nor you tell me how the phone reacts now to XS++ and SeTool 2 lite and also you don’t tell what happens when phone starts.
TONY Playing with GDFS is something extreme. Lets not play with it. Unless you really have written alien gdfs into phone. or written a script in place of gdfs in gdfs area.
which i am sure you have not done.
incase you wrote back alien gdfs then phone is dead.
we could try recovery which is of course terrible risky. and i am sure you don’t need anything as such. since your gdfs is still clean and good.
hey, I guess theres a serious prob. in ma cell.
I followed ur tutorial to apply Quick Access Patch, but after that, my cell is not starting. The log in XS++ gets struck on
“Activating GDFS…”
also in setool2lite, when I try to READ GDFS, it says:
“Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition – please visit http://www.setool.net and buy FULL.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220601924561 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:8 secs.”
Plz help me…..
Did you reinsert the battery after that?
It may be bad patch, try reflashing main.
my w550i is dead…the restoring gets stuck to activating GDFS….i need the fs for w550i to reflash it….where can i find it.??
vikhyat use XS++ 2.2 and just REFLASH MAIN and FS and CDA.
no need to restore GDFS.
yes i SAID XS++ 2.2 not 3.1
Mr Akashya
i have also same problem as Mr.anupam.and the error codes r also same.i have w610.Wht to do please help me.
anupam asked about a problem elsewhere and for him reflashing main did the trick.
XS++ v2.2 Ready !
20:52:18| Executed on Microsoft Windows Vista
20:52:25|
20:52:25| Attempting to open the interface…
20:52:25|
20:52:25| Turn off phone
20:52:25| Hold ‘C’ button on phone and connect phone.
20:52:25| You have 30 seconds.
20:52:29| Baseband ID: 9900
20:52:29| Hardware Platform: DB2020
20:52:29| Protocol Version: 3.1
20:52:29| Warning: IMEI name does not match GDFS name (IMEI:K530 GDFS:W660)
20:52:29| …using IMEI name
20:52:29|
20:52:29| Profiling SEMC phone…
20:52:29| Baseband ID: DB2020
20:52:29| OTP CID: 51
20:52:29| EROM CID: 53
20:52:29| EROM Color: Red
20:52:29| IMEI: 35780401xxxxxx
20:52:29| Phone ID: K530
20:52:29| Network: EUROPE_2
20:52:29| CDA: CDA102568/4 R5A
20:52:29| Firmware Version: R8BB001
20:52:29| EROM: R3A022
20:52:29| Ready for operation!
20:53:39| Shutting down…
plz help me how can i flash back again my k530i into w660
Isn’t it W660 right now?
Anyway, you must download CID 53 firmwares for it from share2flash.com. Then use JDFlasher (oflash) to flash them on.
I just unbranded my phone and installed flash themes on my phone… worked like a charm! I did it with my girl’s phone and it is messed up bad. The screen wraps around and is all fuzz and stuff. I used the exact same files for her phone as mine…after that I used my gdfs to restore into hers… bricked it… but thank god I saved a copy of hers… so I restored her gdfs and now I am still with a unbranded phone with a messed up display! … Its a w580… any help please 🙂
Hi Akshay,
I unbranded my w580 last night. I also backed up the GDFS and used Setools to unbrand it. Everything was successful!
Here’s the thing: I forgot to save some of my data like my contacts, text messages, bookmarks, downloaded themes, etc. I thought these were on the SIM and M2 memory stick I pulled out before i unbranded it. My question is this: does the backup GDFS contain this “lost” data or just configuration files for the w580i phone?
I wanted to restore the GDFS and see if I could get my “lost” data back; back it up somewhere to safe keeping.
Thanks in advance for your help!!
JMF
Task , lol if you don’t follow instruction properly that’s what happens.
now just reflash fs and main and cda.
if phone blinks white you have killed the gdfs. restoring gdfs is only solution. nothing can be done beyond it.
Janii.
no man the gdfs backup you made won’t have all that.
have lost my manu in sony ericsson k800, anyone who knows how to get it back?
please help
Get menu.ml from one of these archives. http://sek750.extra.hu/letoltes/?path=./Directory%20Files/K800/
Use XS++ FSX or FAR or JDFlasher to upload it.
i flashed my k750i main & fs & cda its does not start it displays please wait but dont begin
w800i — permanent white screen — no GDFS backup —where do I go from here………
regards IAN
First you tell what you did to it. Then check if the memory stick is in, I once had white screen with a K750@W800 because of bad mem stick.
Hi Peti,
w800i was working OK for several years, then one morning on power-up the WSOD. Plugged in power supply to charge battery—–black screen.
Used SEUS update—–ran OK but problem persists.
Yes memory stick is in—-removed stick (is that correct)——same result.
It looks very much like a hardware problem, but still you can try this:
Open XS++, connect the phone. Get firmwares according to your CID number (see in xs++ log tablet, erom cid). Flash them on, following the xs++ tutorial here. Then get a CDA (aka custpack) and flash it on, too. You can get them from the download page, I think.
Before following your advice, I have no idea of the battery charge level. Is there any way of checking this ?
Well there are technical tools to check the battery voltage, but that’s not really SE flashing stuff. Ask a friend with same or almost same phone (only battery must be the same) to change batteries?
Thanks Peti……I am a Machine tool electrical/electronic technician, i’m just being lazy—maybe hoping to use any knowledge base to check the battery as such items are not really relevant to my profession. I have an array of tech. equipment which just requires me to research the relevant info and charging characteristics of the battery involved……..then we can get back to the flashing stuff. Will reply ASAP with any reliable way of checking battery charge unless a friend has the same battery….cheers
Hi, my k710i went dead. i didnt back up GDFS. Is there is any way to fix the problem?.
Yes, you should first try reflashing main and fs (and cda). Also check if the red light is blinking.
Thanks for the reply. No the red light is not blinking. What shall i do?
what’s the problem then ?
go for a reflash, it software has crashed badly.
check out XS++ tutorials links in LEFT Sidebar
Now the mobile is working aftr reflashing it with XS++. Thanks very much for you help.
akshay. i have w580i on cid 53. it is blinking red. this means erom or gdfs right? the gdfs cannot be backed up because se tool does not support 53. so how can i backup my gdfs or get a fresh clean version? is this possible? or even put a new erom on it? can you help please
Currently there’s no solution for that. I’ve heard that XS++ 3.2 with CID53 support is about to come out, I don’t know if it will fix Dead EROM.
It looks like you’ll have to bring it to a service center. :S
Hey i need a bit of help i flashed my phone once and all was fine worked perfect then i noticed i didnt have my lighteffects so i tried to put the s500 TPA file with the w580 fs and main but now my phone wont turn on when i press the on button it just vibrates then nothing happens :S im very confuzed, i have an s500i. really need some help fast lol
Hope someone can give me advice on what to do, im just tried to put it all back to w580 fs n main n tpa to see if that sorts it out but still doing the same, :(.
if anyone can help could you please add me on msn or email me on [email protected]
any help would be much appreciated
Thank you
Adam
ahh here is an update, i have managed to get a copy of another s500i GDFS file and i have sorted it out and put the GDFS file in and put the old scripts back in then installed the fs and main files and tpa and the phone is in perfect working order again :D.
So it is possible to fix a damaged GDFS file and i dont even know what im doing with phones so if i can do it im sure other ppl can :D.
P.S. if anyone is wanting a GDFS file i have got K610, K790, K800, S500, W580, W610, W710, W850 and W880 files just send me an email if you want them, [email protected]
my k810i cid53 has a white screen when i try to start it, it also vibrates twice…
is it the gdfs or is it a hardware problem
Alex: try flashing your phone with the right software and do the custom packs and if that doesnt sort it out then it could quite possibly be your gdfs, if it is your gdfs there is a way to fix it and get a gdfs file to replace it, unfortunatly i havent got a K810i gdfs i have a K800, K790 and a K610 gdfs but i am not sure if any of them will work on your model because they preset to funtion different parts of your phone, if you can find a K810i gdfs then the guide on how to fix a damaged one is on this forum >>> http://myforum.lasyk.net/showthread.php?t=39486
I fixed my gdfs and phone works fine so let us know how you get on
Yeah, well nice. But it won’t work for him. CID 53… he can’t do anything to his GDFS or EROM. Only try to reflash main and fs.
i break my gdfs … i dont have any backup
i need w610 gdfs pleasee
“[email protected]”
Your phone’s GDFS is unique to your phone, this means when you think your phone’s GDFS is gone, don’t try to flash someone else’s GDFS, it will almost certainly kill the phone.
Try reflashing main and fs befor thinking it’s gone.
hey akshayy my bro bought a k530i and i want to flash it to w660 the problem is that its cid 53 i have the main and fs of w660 cid 53 and jdflasher i want to make a backup of gdfs and since jdflasher cant backup gdfs are there any other free tools to backup cid 53 gdfs idont know much about cid 53 coz i have k550@w610 cid 52
There is no (free) way at the moment to backup CID 53 firmware. I think XS++’s new version will do it, but I have no idea when.
hey good afternoon akshayy, im in desperate need of your help
plz help me;(
early this morning around 3am after extensively reading ur forums and tutoials about how to flash s500 to w580, i decided to flash my s500 to w580.
i downloaded all necessary files and backuped gdfs.
i have the logs of all the transactions done in xs++, i just want my old s500 back:( this phone wasnt even one month old! After flashing to w580, the screen images seem to be strecthed out horizantally with black lines running thruy them. In xs++, it said that the flash was successful but when i turned on the phone, the screen’s images were elongated. I flash phone again, but with diff cust pack, the problem happened.
So i finally decided to restore gdfs this morning after little or no sleep. After flashing my own gdfs .. My phone now tells me configuration error please contact your service provider.
i’m sorry to bother you, but if you can at all help me, that’d be greatly appreciated. Thank you for your time in advance.
ps. if u forward me some way of attatching files, example: ur email add., i can send u the xs++ modding notes as well as pics of the phones current state. Thanks again.
You used a buggy firmware. Use R8BA024. 😉
HEEEEEEEEEEELLLLLLLLLLLLLLLLLLPPPPPPPPPPPP PLZ!! CAN SOMEONE WRITE ME BACK AND TELL ME HOW TO FIX OR REFLASH MY PHONE TO THE CORRECT SETTINGS
EMAIL ME AT [email protected]
I’VE BEEN ASKING 4 HELP ALL WEEKEND
I JUST WANT MY NEW PHONE 2 WORK AGAIN=(
THANKS AGAIN
THIS IS THE MODDING CODE, I AM USING VISTA, I EVEN CHOSE TO RUN AS ADMIN AND CHANGED COMPATIBILITY TO XP SP2
22:36:41| XS++ v3.1 (Darwin) Ready !
22:36:41| Executed on Microsoft Windows XP
22:36:49|
22:36:49| Attempting to open the interface…
22:36:49|
22:36:49| TURN OFF PHONE!
22:36:49| Hold ‘C’ button on phone and connect phone NOW.
22:36:49| You have 30 seconds…
22:36:49|
22:36:55| Baseband ID: 9900
22:36:55| Protocol Version: 3.1
22:36:55| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
22:36:55| …using GDFS name
22:36:55|
22:36:55| Profiling SEMC phone…
22:36:55| Platform: DB2020
22:36:55| OTP CID: 51
22:36:55| EROM CID: 52
22:36:55| EROM Color: Red
22:36:55| IMEI: 35344702xxxxxx
22:36:55| Phone ID: W580
22:36:55| Region: APAC
22:36:55| CDA: CDA102765/85 R4A
22:36:55| Firmware Version: R8BE001
22:36:55| EROM: R3A022
22:36:55| Ready for operation!
22:37:03| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
22:37:03| Custpack: AMERICA_2 (CDA102460/101) (K510)
22:37:03| Generic(non-branded) custpack: Yes
22:37:03| Allowed languages: en, pb, xl,
22:37:03| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
22:37:27| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
22:37:27| Custpack: THAI (CDA102418/102) (W900)
22:37:27| Generic(non-branded) custpack: Yes
22:37:27| Allowed languages: en, th,
22:37:27| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
22:37:47|
22:37:47| Sending db2020_cid01_prodid_p3j.bin…
22:37:47| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
22:37:47| This is a PRODUCTION_ID loader
22:37:47|
22:37:47| Sending db2020_mem_patcher_cid52_r2a006.bin…
22:37:48| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
22:37:48| This is a MEM_PATCHER loader
22:37:48|
22:37:48| Sending db2020_cid52red_flash_r2a005.bin…
22:37:48| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
22:37:48| This is a FLASH loader
22:37:48| Now flashing firmware main…
22:37:48| Flashing c:\users\sheron\desktop\3rdflashr8ba024\w580_r8ba024_main_generic_la_red52.mbn
22:37:48| Header type: BABE
22:37:48| 460 flashblocks
22:41:37| Finishing flash
22:41:37| Done flashing
22:41:37| Now flashing filesystem…
22:41:37| Flashing c:\users\sheron\desktop\3rdflashr8ba024\w580_r8ba024_fs_america_1_red52.fbn
22:41:37| Header type: BABE
22:41:37| 209 flashblocks
22:43:22| Finishing flash
22:43:22| Done flashing
22:43:22|
22:43:22| Sending db2020_red52_cs_r3a009.bin…
22:43:24| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
22:43:24| This is a CHIPSELECT loader
22:43:24| Activating loader…
22:43:24| Activating GDFS…
22:44:02| This loader is UNLOCKED
22:44:02| Success! CS-loader has been unlocked!
22:44:02| Uploading customization files to phone…
22:44:02| Uploading /files_to_upload to phone…
22:44:02| Sending shutdown command to phone…
22:44:02| Customizing was SUCCESSFUL!
22:44:03| Disconnecting phone…
22:44:03| You may now unplug your phone.
22:44:03| Flashing was successful
22:44:05| Disconnected… Unplug the phone
1. WHY UPPERCASE?
2. What is the problem with the phone?? That is the only thing you don’t tell.
Hey Akshay, i have a problem wit my phone. It’s a sony ericsson w580i and what happened was i tried to unlock it and at first everything was unlocked and working except for the display screen, everything seemed to be bigger like alot bigger and now not only is the display screen bigger but it’s saying that the configuration setting is wrong. Is my phone messed up? or can i actually fix it? and how?? Please reply back. Thanks in advance
Jcmok don’t worry..
download R8BExxx firmwares and redo the whole process.
all will go well
R6BC firmwares have probs…
My P1i is dead. If you can help me, it would be the best thing anybody has done for me. It started when i tried to update SEUS and it cut-off at about 90%. After that, i used xs++ to flash the CCPU ressurection package then i could update. Then one day while it was on, the keys were not responding and nothing was responding so i removed the battery and since then it has been dead since.I took it for professional flashing and after, they told me the phone flash completed but still doesnt come on. just flashes red at base. This is a log of ALL the things ive ever done to the phone with xs++. At the top, the phone was still working to some point.
17:00:48| XS++ v3.1 (Darwin) Ready !
17:00:48| Executed on Microsoft Windows XP
17:01:30| Executing SEMC Smartphone Operations!
17:01:30| Please hold boot key (‘@’ or ‘C’) and connect device…
17:02:43| Master Port detected: COM9
17:02:43| Slave Port detected: COM10
17:02:43| Opening Port!
17:02:44| INIT MASTER…OK!
17:02:44| PHONE INFO SAMPLED…OK!
17:02:44| EPOC APPLET HEADER SENT…OK!
17:02:44| APPLET BODY SENT…OK!
17:02:44| SHUTTING DOWN MASTER…OK!
17:02:46| Baseband ID: 7100
17:02:46| Protocol Version: 3.1
17:02:46| NEW SECURITY PHONE DETECTED! SWITCHING…
17:02:47| Speed set to 460800
17:02:47|
17:02:47| Sending db2000_cid03_prodid_p3b.bin…
17:02:47| Payload: Failed
17:02:47| Sending PRODUCTION_ID LOADER
17:02:47| Cannot open n/a
17:02:47| Activating GDFS…
17:02:47| Binary acknowledge failed with: e2
17:02:47| Failed
17:02:47| Failed
17:02:47| Activating GDFS…
17:02:47| Binary acknowledge failed with: 53
17:02:47| Failed
17:02:47| Failed
17:02:47| Activating GDFS…
17:02:47| Binary acknowledge failed with: 46
17:02:47| Failed
17:02:47| Failed
17:02:47| Binary acknowledge failed with: 37
17:02:47| Failed
17:02:47| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
17:02:47| …using GDFS name
17:02:47|
17:02:47| Profiling EPOC smartphone…
17:02:47| Platform: DB2001
17:02:47| OTP CID: 0
17:02:47| EROM CID: 0
17:02:47| EROM Color: n/a
17:02:47| IMEI: n/a
17:02:47| Phone ID: n/a
17:02:47| Part Number: n/a
17:02:47| Phone smartphone version: R1C01
17:02:47| Phone software version:
17:02:47| Processing Unit:
17:02:47| Organizer:
17:02:47| CDA:
17:02:47|
17:02:47| Sending db2010_cid00_prodid_p3l.bin…
17:02:47| Header: Failed
17:02:47| Ready for operation!
17:03:07| A Brown Smartphone? Joking?
17:03:07| Error: Failed to send CSLoader!
17:03:07| FSX Shutdown!
17:03:09| Disconnected… Unplug the phone
17:05:22| Shutting down…
17:05:34| XS++ v3.1 (Darwin) Ready !
17:05:34| Executed on Microsoft Windows XP
17:06:00| Executing SEMC Smartphone Operations!
17:06:00| Please hold boot key (‘@’ or ‘C’) and connect device…
17:06:24| Master Port detected: COM9
17:06:24| Slave Port detected: COM10
17:06:24| Opening Port!
17:06:24| INIT MASTER…OK!
17:06:24| PHONE INFO SAMPLED…OK!
17:06:24| EPOC APPLET HEADER SENT…OK!
17:06:24| APPLET BODY SENT…OK!
17:06:24| SHUTTING DOWN MASTER…OK!
17:06:26| Baseband ID: 7100
17:06:26| Protocol Version: 3.1
17:06:26| NEW SECURITY PHONE DETECTED! SWITCHING…
17:06:27| Speed set to 460800
17:06:27|
17:06:27| Sending db2000_cid03_prodid_p3b.bin…
17:06:29| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUÃTIONIDLOADER_PsB
17:06:29| This is an unknown loader type
17:06:29| Sending PRODUCTION_ID LOADER
17:06:29| Cannot open n/a
17:06:29| Activating GDFS…
17:06:29| Cannot open GDFS
17:06:29| Activating GDFS…
17:06:29| Cannot open GDFS
17:06:29| Activating GDFS…
17:06:29| Cannot open GDFS
17:06:29| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
17:06:29| …using GDFS name
17:06:29|
17:06:29| Profiling EPOC smartphone…
17:06:29| Platform: DB2001
17:06:29| OTP CID: 0
17:06:29| EROM CID: 0
17:06:29| EROM Color: n/a
17:06:29| IMEI: n/a
17:06:29| Phone ID: n/a
17:06:29| Part Number: n/a
17:06:29| Phone smartphone version: R1C01
17:06:29| Phone software version:
17:06:29| Processing Unit:
17:06:29| Organizer:
17:06:29| CDA:
17:06:29|
17:06:29| Sending db2010_cid00_prodid_p3l.bin…
17:06:29| Header: Error 0x10
17:06:29| Ready for operation!
17:07:53| A Brown Smartphone? Joking?
17:07:53| Error: Failed to send CSLoader!
17:07:53| FSX Shutdown!
17:07:55| Disconnected… Unplug the phone
17:14:26| Shutting down…
17:17:09| XS++ v3.1 (Darwin) Ready !
17:17:09| Executed on Microsoft Windows XP
17:17:32| Executing SEMC Smartphone Operations!
17:17:32| Please hold boot key (‘@’ or ‘C’) and connect device…
17:18:26| Master Port detected: COM9
17:18:26| Slave Port detected: COM10
17:18:27| Opening Port!
17:18:27| INIT MASTER…OK!
17:18:27| PHONE INFO SAMPLED…OK!
17:18:27| EPOC APPLET HEADER SENT…OK!
17:18:27| APPLET BODY SENT…OK!
17:18:27| SHUTTING DOWN MASTER…OK!
17:18:29| Baseband ID: 7100
17:18:29| Protocol Version: 3.1
17:18:29| NEW SECURITY PHONE DETECTED! SWITCHING…
17:18:30| Speed set to 460800
17:18:30|
17:18:30| Sending db2000_cid03_prodid_p3b.bin…
17:24:48| Error: Server not found!
17:24:58| Disconnected… Unplug the phone
17:25:15| Executing SEMC Smartphone Operations!
17:25:15| Please hold boot key (‘@’ or ‘C’) and connect device…
17:26:21| Master Port detected: COM9
17:26:21| Slave Port detected: COM10
17:26:21| Opening Port!
17:26:21| INIT MASTER…OK!
17:26:21| PHONE INFO SAMPLED…OK!
17:26:21| EPOC APPLET HEADER SENT…OK!
17:26:21| APPLET BODY SENT…OK!
17:26:21| SHUTTING DOWN MASTER…OK!
17:26:23| Baseband ID: 7100
17:26:23| Protocol Version: 3.1
17:26:23| NEW SECURITY PHONE DETECTED! SWITCHING…
17:26:24| Speed set to 460800
17:26:24|
17:26:24| Sending db2000_cid03_prodid_p3b.bin…
17:26:26| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
17:26:26| This is a PRODUCTION_ID loader
17:26:26| Activating GDFS…
17:26:26| Cannot open GDFS
17:26:26| Activating GDFS…
17:26:26| Cannot open GDFS
17:26:26| Activating GDFS…
17:26:26| Cannot open GDFS
17:26:26| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)
17:26:26| …using IMEI name
17:26:26|
17:26:26| Profiling EPOC smartphone…
17:26:26| Platform: DB2001
17:26:26| OTP CID: 52
17:26:26| EROM CID: 53
17:26:26| EROM Color: Red
17:26:26| IMEI: 35703301xxxxxx
17:26:26| Phone ID: P1
17:26:26| Part Number: n/a
17:26:26| Phone smartphone version: R1C01
17:26:26| Phone software version:
17:26:26| Processing Unit:
17:26:26| Organizer:
17:26:26| CDA:
17:26:26| Activating GDFS…
17:26:26| Cannot open GDFS
17:26:26| Ready for operation!
17:26:59|
17:26:59| Parsing package contents…
17:26:59| CCPU (BABE) file: CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
17:26:59| CCPU (BABE) file: CCPU_Signaling_SW_R9H004R_RED53.software
17:27:18|
17:27:18| SMARTPHONE WILL BE FLASHED IN 1 PHASE!
17:27:18|
17:27:18| [———- PHASE 2 ———-]
17:27:18|
17:27:18| Sending db2001_cid53red_flash_r1a003.bin…
17:27:19| Applet ID: 060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
17:27:19| This is a FLASH loader
17:27:20| Flashing CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
17:27:20| Header type: BABE
17:27:20| 107 flashblocks
17:30:29| Finishing flash
17:30:31| Done flashing
17:30:31| Flashing CCPU_Signaling_SW_R9H004R_RED53.software
17:30:31| Header type: BABE
17:30:31| 8 flashblocks
17:30:45| Finishing flash
17:30:46| Done flashing
17:30:46| Smartphone CCPU Flash Returned: OK
17:30:46| ++ Flashing was successful
17:30:48| Disconnected… Unplug the phone
18:04:53| Shutting down…
12:47:38| XS++ v3.1 (Darwin) Ready !
12:47:38| Executed on Microsoft Windows XP
12:48:01| Shutting down…
06:39:32| XS++ v3.1 (Darwin) Ready !
06:39:32| Executed on Microsoft Windows XP
06:39:52| Shutting down…
14:41:28| XS++ v3.1 (Darwin) Ready !
14:41:28| Executed on Microsoft Windows XP
14:43:23| Executing SEMC Smartphone Operations!
14:43:23| Please hold boot key (‘@’ or ‘C’) and connect device…
14:43:54| Disconnected… Unplug the phone
14:43:58| Shutting down…
14:45:15| XS++ v3.1 (Darwin) Ready !
14:45:15| Executed on Microsoft Windows XP
14:45:30| Executing SEMC Smartphone Operations!
14:45:30| Please hold boot key (‘@’ or ‘C’) and connect device…
14:46:00| Master Port detected: COM9
14:46:00| Slave Port detected: COM10
14:46:00| Opening Port!
14:46:00| INIT MASTER…OK!
14:46:00| PHONE INFO SAMPLED…OK!
14:46:00| EPOC APPLET HEADER SENT…OK!
14:46:00| APPLET BODY SENT…OK!
14:46:00| SHUTTING DOWN MASTER…OK!
14:46:02| Baseband ID: 7100
14:46:02| Protocol Version: 3.1
14:46:02| NEW SECURITY PHONE DETECTED! SWITCHING…
14:46:03| Speed set to 460800
14:46:03|
14:46:03| Sending db2000_cid03_prodid_p3b.bin…
14:46:04| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:46:04| This is a PRODUCTION_ID loader
14:46:04| Activating GDFS…
14:46:05| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:46:05| …using IMEI name
14:46:05|
14:46:05| Profiling EPOC smartphone…
14:46:05| Platform: DB2001
14:46:05| OTP CID: 52
14:46:05| EROM CID: 53
14:46:05| EROM Color: Red
14:46:05| IMEI: 35703301xxxxxx
14:46:05| Phone ID: P1
14:46:05| Part Number: ›`¢ÐA
14:46:05| Phone smartphone version: R1C01
14:46:05| Phone software version:
14:46:05| Processing Unit:
14:46:05| Organizer:
14:46:05| CDA:
14:46:05|
14:46:05| … and the phone lock code is: 1081EE09 (only 80 digits)
14:46:05|
14:46:05| Ready for operation!
14:46:27|
14:46:27| Sending db2001_cid53red_cs_p1e.bin…
14:46:44| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
14:46:44| This is a CHIPSELECT loader
14:46:44| Activating loader…
14:46:44| Activating GDFS…
14:53:11| Sendinging shutdown signal to phone…
14:53:13| Shutting down…
14:53:27| XS++ v3.1 (Darwin) Ready !
14:53:27| Executed on Microsoft Windows XP
14:53:36| Executing SEMC Smartphone Operations!
14:53:36| Please hold boot key (‘@’ or ‘C’) and connect device…
14:54:51| Master Port detected: COM9
14:54:51| Slave Port detected: COM10
14:54:51| Opening Port!
14:54:51| INIT MASTER…OK!
14:54:51| PHONE INFO SAMPLED…OK!
14:54:51| EPOC APPLET HEADER SENT…OK!
14:54:51| APPLET BODY SENT…OK!
14:54:51| SHUTTING DOWN MASTER…OK!
14:54:53| Baseband ID: 7100
14:54:53| Protocol Version: 3.1
14:54:53| NEW SECURITY PHONE DETECTED! SWITCHING…
14:54:54| Speed set to 460800
14:54:54|
14:54:54| Sending db2000_cid03_prodid_p3b.bin…
14:54:56| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:54:56| This is a PRODUCTION_ID loader
14:54:56| Activating GDFS…
14:54:56| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:54:56| …using IMEI name
14:54:56|
14:54:56| Profiling EPOC smartphone…
14:54:56| Platform: DB2001
14:54:56| OTP CID: 52
14:54:56| EROM CID: 53
14:54:56| EROM Color: Red
14:54:56| IMEI: 35703301xxxxxx
14:54:56| Phone ID: P1
14:54:56| Part Number: ›b¢ÐA
14:54:56| Phone smartphone version: R1C01
14:54:56| Phone software version:
14:54:56| Processing Unit:
14:54:56| Organizer:
14:54:56| CDA:
14:54:56|
14:54:56| … and the phone lock code is: 1081EE09 (only 80 digits)
14:54:56|
14:54:56| Ready for operation!
14:55:42|
14:55:42| Sending db2001_cid53red_cs_p1e.bin…
14:55:59| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
14:55:59| This is a CHIPSELECT loader
14:55:59| Activating loader…
14:55:59| Activating GDFS…
14:57:53| Sendinging shutdown signal to phone…
14:57:55| Shutting down…
14:59:51| XS++ v3.1 (Darwin) Ready !
14:59:51| Executed on Microsoft Windows XP
15:00:04| Executing SEMC Smartphone Operations!
15:00:04| Please hold boot key (‘@’ or ‘C’) and connect device…
15:00:32| Master Port detected: COM9
15:00:32| Slave Port detected: COM10
15:00:32| Opening Port!
15:00:32| INIT MASTER…OK!
15:00:32| PHONE INFO SAMPLED…OK!
15:00:32| EPOC APPLET HEADER SENT…OK!
15:00:32| APPLET BODY SENT…OK!
15:00:32| SHUTTING DOWN MASTER…OK!
15:00:34| Baseband ID: 7100
15:00:34| Protocol Version: 3.1
15:00:34| NEW SECURITY PHONE DETECTED! SWITCHING…
15:00:35| Speed set to 460800
15:00:35|
15:00:35| Sending db2000_cid03_prodid_p3b.bin…
15:00:36| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
15:00:36| This is a PRODUCTION_ID loader
15:00:36| Activating GDFS…
15:00:36| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
15:00:36| …using IMEI name
15:00:36|
15:00:36| Profiling EPOC smartphone…
15:00:36| Platform: DB2001
15:00:36| OTP CID: 52
15:00:36| EROM CID: 53
15:00:36| EROM Color: Red
15:00:36| IMEI: 35703301xxxxxx
15:00:36| Phone ID: P1
15:00:36| Part Number: ›b¢ÐA
15:00:36| Phone smartphone version: R1C01
15:00:36| Phone software version:
15:00:36| Processing Unit:
15:00:36| Organizer:
15:00:36| CDA:
15:00:36|
15:00:36| … and the phone lock code is: 1081EE09 (only 80 digits)
15:00:36|
15:00:36| Ready for operation!
15:01:02|
15:01:02| Sending db2001_cid53red_cs_p1e.bin…
15:01:18| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
15:01:18| This is a CHIPSELECT loader
15:01:18| Activating loader…
15:01:18| Activating GDFS…
15:06:56| Error: GDFS operation failed.
15:06:56| Disconnected… Unplug the phone
15:07:22| Shutting down…
15:07:51| XS++ v3.1 (Darwin) Ready !
15:07:51| Executed on Microsoft Windows XP
15:07:59| Executing SEMC Smartphone Operations!
15:07:59| Please hold boot key (‘@’ or ‘C’) and connect device…
15:08:13| Master Port detected: COM9
15:08:13| Slave Port detected: COM10
15:08:13| Opening Port!
15:08:13| INIT MASTER…OK!
15:08:13| PHONE INFO SAMPLED…OK!
15:08:13| EPOC APPLET HEADER SENT…OK!
15:08:13| APPLET BODY SENT…OK!
15:08:13| SHUTTING DOWN MASTER…OK!
15:08:15| Baseband ID: 7100
15:08:15| Protocol Version: 3.1
15:08:15| NEW SECURITY PHONE DETECTED! SWITCHING…
15:08:16| Speed set to 460800
15:08:16|
15:08:16| Sending db2000_cid03_prodid_p3b.bin…
15:08:18| Prologue: Failed
15:08:18| Sending PRODUCTION_ID LOADER
15:08:18| Cannot open n/a
15:08:18| Activating GDFS…
15:08:26| Binary acknowledge failed with: 6f
15:08:26| Failed
15:08:26| Failed
15:08:26| Activating GDFS…
15:08:26| Binary acknowledge failed with: f1
15:08:26| Failed
15:08:26| Failed
15:08:26| Activating GDFS…
15:08:26| Binary acknowledge failed with: ee
15:08:26| Failed
15:08:26| Failed
15:08:26| Binary acknowledge failed with: 5f
15:08:26| Failed
15:08:26| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
15:08:26| …using GDFS name
15:08:26|
15:08:26| Profiling EPOC smartphone…
15:08:26| Platform: DB2001
15:08:26| OTP CID: 0
15:08:26| EROM CID: 0
15:08:26| EROM Color: n/a
15:08:26| IMEI: n/a
15:08:26| Phone ID: n/a
15:08:26| Part Number: n/a
15:08:26| Phone smartphone version: R1C01
15:08:26| Phone software version:
15:08:26| Processing Unit:
15:08:26| Organizer:
15:08:26| CDA:
15:08:26|
15:08:26| Sending db2010_cid00_prodid_p3l.bin…
15:08:26| Header: Failed
15:08:26| Ready for operation!
15:08:59| A Brown Smartphone? Joking?
15:08:59| Error: Failed to send CSLoader!
15:08:59| FSX Shutdown!
15:09:01| Disconnected… Unplug the phone
15:09:21| Shutting down…
15:09:38| XS++ v3.1 (Darwin) Ready !
15:09:38| Executed on Microsoft Windows XP
15:10:13| Shutting down…
15:10:35| XS++ v3.1 (Darwin) Ready !
15:10:35| Executed on Microsoft Windows XP
15:10:43| Executing SEMC Smartphone Operations!
15:10:43| Please hold boot key (‘@’ or ‘C’) and connect device…
15:11:46| Disconnected… Unplug the phone
15:11:54| Shutting down…
15:12:02| XS++ v3.1 (Darwin) Ready !
15:12:02| Executed on Microsoft Windows XP
15:12:15| Executing SEMC Smartphone Operations!
15:12:15| Please hold boot key (‘@’ or ‘C’) and connect device…
15:12:30| Master Port detected: COM9
15:12:30| Slave Port detected: COM10
15:12:31| Opening Port!
15:12:31| INIT MASTER…OK!
15:12:31| PHONE INFO SAMPLED…OK!
15:12:31| EPOC APPLET HEADER SENT…OK!
15:12:31| APPLET BODY SENT…OK!
15:12:31| SHUTTING DOWN MASTER…OK!
15:12:33| Baseband ID: 7100
15:12:33| Protocol Version: 3.1
15:12:33| NEW SECURITY PHONE DETECTED! SWITCHING…
15:12:34| Speed set to 460800
15:12:34|
15:12:34| Sending db2000_cid03_prodid_p3b.bin…
15:12:35| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
15:12:35| This is a PRODUCTION_ID loader
15:12:35| Activating GDFS…
15:14:43| Disconnected… Unplug the phone
15:14:58| Shutting down…
15:15:37| XS++ v3.1 (Darwin) Ready !
15:15:37| Executed on Microsoft Windows XP
15:15:44| Executing SEMC Smartphone Operations!
15:15:44| Please hold boot key (‘@’ or ‘C’) and connect device…
15:16:42| Disconnected… Unplug the phone
15:16:54| Shutting down…
15:17:03| XS++ v3.1 (Darwin) Ready !
15:17:03| Executed on Microsoft Windows XP
15:17:11| Executing SEMC Smartphone Operations!
15:17:11| Please hold boot key (‘@’ or ‘C’) and connect device…
15:18:00| Disconnected… Unplug the phone
15:18:08| Shutting down…
15:20:30| XS++ v3.1 (Darwin) Ready !
15:20:30| Executed on Microsoft Windows XP
15:20:37| Executing SEMC Smartphone Operations!
15:20:37| Please hold boot key (‘@’ or ‘C’) and connect device…
15:21:18| Disconnected… Unplug the phone
15:21:31| Shutting down…
15:22:31| XS++ v3.1 (Darwin) Ready !
15:22:31| Executed on Microsoft Windows XP
15:22:41| Executing SEMC Smartphone Operations!
15:22:41| Please hold boot key (‘@’ or ‘C’) and connect device…
15:22:56| Master Port detected: COM9
15:22:56| Slave Port detected: COM10
15:22:56| Opening Port!
15:22:56| INIT MASTER…OK!
15:22:56| PHONE INFO SAMPLED…OK!
15:22:56| EPOC APPLET HEADER SENT…OK!
15:22:56| APPLET BODY SENT…OK!
15:22:56| SHUTTING DOWN MASTER…OK!
15:22:58| Baseband ID: 7100
15:22:58| Protocol Version: 3.1
15:22:58| NEW SECURITY PHONE DETECTED! SWITCHING…
15:22:59| Speed set to 460800
15:22:59|
15:22:59| Sending db2000_cid03_prodid_p3b.bin…
15:23:00| Applet ID: 070410 1354 NPACXC125871_DB2000_PROD«CTIONIDLOADÅR_P3B
15:23:00| This is an unknown loader type
15:23:00| Sending PRODUCTION_ID LOADER
15:23:00| Cannot open n/a
15:23:00| Activating GDFS…
15:23:00| Binary acknowledge failed with: 18
15:23:00| Failed
15:23:00| Failed
15:23:00| Activating GDFS…
15:23:00| Binary acknowledge failed with: 02
15:23:00| Failed
15:23:01| Failed
15:23:01| Activating GDFS…
15:24:01| Disconnected… Unplug the phone
15:24:23| Shutting down…
15:25:12| XS++ v3.1 (Darwin) Ready !
15:25:12| Executed on Microsoft Windows XP
15:25:37| Executing SEMC Smartphone Operations!
15:25:37| Please hold boot key (‘@’ or ‘C’) and connect device…
15:25:58| Master Port detected: COM9
15:25:58| Slave Port detected: COM10
15:25:58| Opening Port!
15:25:58| INIT MASTER…OK!
15:25:58| PHONE INFO SAMPLED…OK!
15:25:58| EPOC APPLET HEADER SENT…OK!
15:25:58| APPLET BODY SENT…OK!
15:25:58| SHUTTING DOWN MASTER…OK!
15:26:00| Baseband ID: 7100
15:26:00| Protocol Version: 3.1
15:26:00| NEW SECURITY PHONE DETECTED! SWITCHING…
15:26:01| Speed set to 460800
15:26:01|
15:26:01| Sending db2000_cid03_prodid_p3b.bin…
15:26:02| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADE²_P3B
15:26:02| This is a PRODUCTION_ID loader
15:26:02| Activating GDFS…
15:26:02| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
15:26:02| …using IMEI name
15:26:02|
15:26:02| Profiling EPOC smartphone…
15:26:02| Platform: DB2001
15:26:02| OTP CID: 52
15:26:02| EROM CID: 53
15:26:02| EROM Color: Red
15:26:02| IMEI: 35703301xxxxxx
15:26:02| Phone ID: P1
15:26:02| Part Number: ›b¢ÐA
15:26:02| Phone smartphone version: R1C01
15:26:02| Phone software version:
15:26:02| Processing Unit:
15:26:02| Organizer:
15:26:03| CDA:
15:26:03| Binary acknowledge failed with: 89
15:26:03| Failed
15:26:03| Failed
15:27:49| Disconnected… Unplug the phone
15:27:56| Shutting down…
15:28:42| XS++ v3.1 (Darwin) Ready !
15:28:42| Executed on Microsoft Windows XP
15:28:52| Executing SEMC Smartphone Operations!
15:28:52| Please hold boot key (‘@’ or ‘C’) and connect device…
15:29:13| Master Port detected: COM9
15:29:13| Slave Port detected: COM10
15:29:13| Opening Port!
15:29:13| INIT MASTER…OK!
15:29:13| PHONE INFO SAMPLED…OK!
15:29:13| EPOC APPLET HEADER SENT…OK!
15:29:13| APPLET BODY SENT…OK!
15:29:13| SHUTTING DOWN MASTER…OK!
15:29:15| Baseband ID: 7100
15:29:15| Protocol Version: 3.1
15:29:15| NEW SECURITY PHONE DETECTED! SWITCHING…
15:29:16| Speed set to 460800
15:29:16|
15:29:16| Sending db2000_cid03_prodid_p3b.bin…
15:29:18| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
15:29:18| This is a PRODUCTION_ID loader
15:29:18| Activating GDFS…
15:29:18| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
15:29:18| …using IMEI name
15:29:18|
15:29:18| Profiling EPOC smartphone…
15:29:18| Platform: DB2001
15:29:18| OTP CID: 52
15:29:18| EROM CID: 53
15:29:18| EROM Color: Red
15:29:18| IMEI: 35703301xxxxxx
15:29:18| Phone ID: P1
15:29:18| Part Number: ›b¢ÐA
15:29:18| Phone smartphone version: R1C01
15:29:18| Phone software version:
15:29:18| Processing Unit:
15:29:18| Organizer:
15:29:18| CDA:
15:29:18|
15:29:18| … and the phone lock code is: 1081EE09 (only 80 digits)
15:29:18|
15:29:18| Ready for operation!
15:29:37|
15:29:37| Sending db2001_cid53red_cs_p1e.bin…
15:29:53| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
15:29:53| This is a CHIPSELECT loader
15:29:53| Activating loader…
15:29:53| Activating GDFS…
15:34:51| Sendinging shutdown signal to phone…
15:34:53| Shutting down…
13:55:26| XS++ v3.1 (Darwin) Ready !
13:55:26| Executed on Microsoft Windows XP
13:56:03| Executing SEMC Smartphone Operations!
13:56:03| Please hold boot key (‘@’ or ‘C’) and connect device…
13:57:08| Sorry, your phone is NOT SUPPORTED
13:57:08| Sendinging shutdown signal to phone…
13:57:10| Shutting down…
13:57:19| XS++ v3.1 (Darwin) Ready !
13:57:19| Executed on Microsoft Windows XP
13:57:26| Executing SEMC Smartphone Operations!
13:57:26| Please hold boot key (‘@’ or ‘C’) and connect device…
13:58:28| Disconnected… Unplug the phone
13:58:51| Executing SEMC Smartphone Operations!
13:58:51| Please hold boot key (‘@’ or ‘C’) and connect device…
13:58:52| Master Port detected: COM9
13:58:52| Slave Port detected: COM10
13:58:52| Opening Port!
13:58:52| INIT MASTER…OK!
13:58:52| PHONE INFO SAMPLED…OK!
13:58:52| EPOC APPLET HEADER SENT…OK!
13:58:52| APPLET BODY SENT…OK!
13:58:52| SHUTTING DOWN MASTER…OK!
13:58:54| Baseband ID: 7100
13:58:54| Protocol Version: 3.1
13:58:54| NEW SECURITY PHONE DETECTED! SWITCHING…
13:58:55| Speed set to 460800
13:58:55|
13:58:55| Sending db2000_cid03_prodid_p3b.bin…
13:58:56| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
13:58:56| This is a PRODUCTION_ID loader
13:58:57| Activating GDFS…
13:58:57| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
13:58:57| …using IMEI name
13:58:57|
13:58:57| Profiling EPOC smartphone…
13:58:57| Platform: DB2001
13:58:57| OTP CID: 52
13:58:57| EROM CID: 53
13:58:57| EROM Color: Red
13:58:57| IMEI: 35703301xxxxxx
13:58:57| Phone ID: P1
13:58:57| Part Number: ›`¢ÐA
13:58:57| Phone smartphone version: R1C01
13:58:57| Phone software version:
13:58:57| Processing Unit:
13:58:57| Organizer:
13:58:57| CDA:
13:58:57|
13:58:57| … and the phone lock code is: 1081EE09 (only 155 digits)
13:58:57|
13:58:57| Ready for operation!
13:59:06|
13:59:06| Sending db2001_cid53red_cs_p1e.bin…
13:59:22| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
13:59:22| This is a CHIPSELECT loader
13:59:22| Activating loader…
13:59:22| Activating GDFS…
13:59:50| This loader is UNLOCKED
13:59:50| Backing up the GDFS…
14:03:40| Sendinging shutdown signal to phone…
14:03:42| Shutting down…
14:04:05| XS++ v3.1 (Darwin) Ready !
14:04:05| Executed on Microsoft Windows XP
14:04:12| Executing SEMC Smartphone Operations!
14:04:12| Please hold boot key (‘@’ or ‘C’) and connect device…
14:04:51| Master Port detected: COM9
14:04:51| Slave Port detected: COM10
14:04:51| Opening Port!
14:04:51| INIT MASTER…OK!
14:04:51| PHONE INFO SAMPLED…OK!
14:04:52| EPOC APPLET HEADER SENT…OK!
14:04:52| APPLET BODY SENT…OK!
14:04:52| SHUTTING DOWN MASTER…OK!
14:04:53| Baseband ID: 7100
14:04:53| Protocol Version: 3.1
14:04:53| NEW SECURITY PHONE DETECTED! SWITCHING…
14:04:54| Speed set to 460800
14:04:54|
14:04:55| Sending db2000_cid03_prodid_p3b.bin…
14:04:56| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:04:56| This is a PRODUCTION_ID loader
14:04:56| Activating GDFS…
14:04:56| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:04:56| …using IMEI name
14:04:56|
14:04:56| Profiling EPOC smartphone…
14:04:56| Platform: DB2001
14:04:56| OTP CID: 52
14:04:56| EROM CID: 53
14:04:56| EROM Color: Red
14:04:56| IMEI: 35703301xxxxxx
14:04:56| Phone ID: P1
14:04:56| Part Number: ›b¢ÐA
14:04:56| Phone smartphone version: R1C01
14:04:56| Phone software version:
14:04:56| Processing Unit:
14:04:56| Organizer:
14:04:56| CDA:
14:04:56|
14:04:56| … and the phone lock code is: 1081EE09 (only 80 digits)
14:04:56|
14:04:56| Ready for operation!
14:05:59|
14:05:59| Sending db2001_cid53red_cs_p1e.bin…
14:06:15| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
14:06:15| This is a CHIPSELECT loader
14:06:15| Activating loader…
14:06:15| Activating GDFS…
14:08:24| Sendinging shutdown signal to phone…
14:08:26| Shutting down…
14:08:45| XS++ v3.1 (Darwin) Ready !
14:08:45| Executed on Microsoft Windows XP
14:08:53| Executing SEMC Smartphone Operations!
14:08:53| Please hold boot key (‘@’ or ‘C’) and connect device…
14:09:34| Sorry, your phone is NOT SUPPORTED
14:09:34| Sendinging shutdown signal to phone…
14:09:36| Shutting down…
14:09:53| XS++ v3.1 (Darwin) Ready !
14:09:53| Executed on Microsoft Windows XP
14:10:00| Executing SEMC Smartphone Operations!
14:10:00| Please hold boot key (‘@’ or ‘C’) and connect device…
14:10:44| Sorry, your phone is NOT SUPPORTED
14:10:44| Sendinging shutdown signal to phone…
14:10:46| Shutting down…
14:11:22| XS++ v3.1 (Darwin) Ready !
14:11:22| Executed on Microsoft Windows XP
14:11:28| Executing SEMC Smartphone Operations!
14:11:28| Please hold boot key (‘@’ or ‘C’) and connect device…
14:11:46| Master Port detected: COM9
14:11:46| Slave Port detected: COM10
14:11:46| Opening Port!
14:11:46| INIT MASTER…OK!
14:11:46| PHONE INFO SAMPLED…OK!
14:11:46| EPOC APPLET HEADER SENT…OK!
14:11:46| APPLET BODY SENT…OK!
14:11:46| SHUTTING DOWN MASTER…OK!
14:11:48| Baseband ID: 7100
14:11:48| Protocol Version: 3.1
14:11:48| NEW SECURITY PHONE DETECTED! SWITCHING…
14:11:49| Speed set to 460800
14:11:49|
14:11:49| Sending db2000_cid03_prodid_p3b.bin…
14:11:51| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:11:51| This is a PRODUCTION_ID loader
14:11:51| Activating GDFS…
14:11:51| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:11:51| …using IMEI name
14:11:51|
14:11:51| Profiling EPOC smartphone…
14:11:51| Platform: DB2001
14:11:51| OTP CID: 52
14:11:51| EROM CID: 53
14:11:51| EROM Color: Red
14:11:51| IMEI: 35703301xxxxxx
14:11:51| Phone ID: P1
14:11:51| Part Number: ›`¢ÐA
14:11:51| Phone smartphone version: R1C01
14:11:51| Phone software version:
14:11:51| Processing Unit:
14:11:51| Organizer:
14:11:51| CDA:
14:11:51|
14:11:51| … and the phone lock code is: 1081EE09 (only 80 digits)
14:11:51|
14:11:51| Ready for operation!
14:12:21|
14:12:21| Sending db2001_cid53red_cs_p1e.bin…
14:12:37| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
14:12:37| This is a CHIPSELECT loader
14:12:37| Activating loader…
14:12:37| Activating GDFS…
14:15:51| Sendinging shutdown signal to phone…
14:15:53| Shutting down…
14:16:08| XS++ v3.1 (Darwin) Ready !
14:16:08| Executed on Microsoft Windows XP
14:16:19| Executing SEMC Smartphone Operations!
14:16:19| Please hold boot key (‘@’ or ‘C’) and connect device…
14:16:40| Master Port detected: COM9
14:16:40| Slave Port detected: COM10
14:16:40| Opening Port!
14:16:40| INIT MASTER…OK!
14:16:40| PHONE INFO SAMPLED…OK!
14:16:40| EPOC APPLET HEADER SENT…OK!
14:16:40| APPLET BODY SENT…OK!
14:16:40| SHUTTING DOWN MASTER…OK!
14:16:42| Baseband ID: 7100
14:16:42| Protocol Version: 3.1
14:16:42| NEW SECURITY PHONE DETECTED! SWITCHING…
14:16:43| Speed set to 460800
14:16:43|
14:16:43| Sending db2000_cid03_prodid_p3b.bin…
14:16:44| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:16:44| This is a PRODUCTION_ID loader
14:16:44| Binary acknowledge failed with: 89
14:16:44| Failed
14:16:44| Reading OTP values failed
14:17:05| Disconnected… Unplug the phone
14:17:12| Shutting down…
14:17:29| XS++ v3.1 (Darwin) Ready !
14:17:29| Executed on Microsoft Windows XP
14:17:36| Executing SEMC Smartphone Operations!
14:17:36| Please hold boot key (‘@’ or ‘C’) and connect device…
14:17:51| Master Port detected: COM9
14:17:51| Slave Port detected: COM10
14:17:51| Opening Port!
14:17:51| INIT MASTER…OK!
14:17:51| PHONE INFO SAMPLED…OK!
14:17:52| EPOC APPLET HEADER SENT…OK!
14:17:52| APPLET BODY SENT…OK!
14:17:52| SHUTTING DOWN MASTER…OK!
14:17:53| Baseband ID: 7100
14:17:53| Protocol Version: 3.1
14:17:53| NEW SECURITY PHONE DETECTED! SWITCHING…
14:17:54| Speed set to 460800
14:17:54|
14:17:55| Sending db2000_cid03_prodid_p3b.bin…
14:17:56| Failed
14:17:56| Sending PRODUCTION_ID LOADER
14:17:56| Cannot open n/a
14:17:56| Activating GDFS…
14:19:02| Disconnected… Unplug the phone
14:19:08| Shutting down…
14:19:22| XS++ v3.1 (Darwin) Ready !
14:19:22| Executed on Microsoft Windows XP
14:19:30| Executing SEMC Smartphone Operations!
14:19:30| Please hold boot key (‘@’ or ‘C’) and connect device…
14:19:50| Disconnected… Unplug the phone
14:20:12| Shutting down…
14:20:24| XS++ v3.1 (Darwin) Ready !
14:20:24| Executed on Microsoft Windows XP
14:20:34| Executing SEMC Smartphone Operations!
14:20:34| Please hold boot key (‘@’ or ‘C’) and connect device…
14:21:05| Disconnected… Unplug the phone
14:21:27| Shutting down…
14:21:38| XS++ v3.1 (Darwin) Ready !
14:21:38| Executed on Microsoft Windows XP
14:21:45| Executing SEMC Smartphone Operations!
14:21:45| Please hold boot key (‘@’ or ‘C’) and connect device…
14:22:34| Disconnected… Unplug the phone
14:22:38| Shutting down…
14:23:22| XS++ v3.1 (Darwin) Ready !
14:23:22| Executed on Microsoft Windows XP
14:23:51| Executing SEMC Smartphone Operations!
14:23:51| Please hold boot key (‘@’ or ‘C’) and connect device…
14:24:35| Disconnected… Unplug the phone
14:26:04| Shutting down…
14:26:12| XS++ v3.1 (Darwin) Ready !
14:26:12| Executed on Microsoft Windows XP
14:26:20| Executing SEMC Smartphone Operations!
14:26:20| Please hold boot key (‘@’ or ‘C’) and connect device…
14:26:57| Sorry, your phone is NOT SUPPORTED
14:26:57| Sendinging shutdown signal to phone…
14:26:59| Shutting down…
14:30:17| XS++ v3.1 (Darwin) Ready !
14:30:17| Executed on Microsoft Windows XP
14:30:52| Executing SEMC Smartphone Operations!
14:30:52| Please hold boot key (‘@’ or ‘C’) and connect device…
14:31:04| Master Port detected: COM9
14:31:04| Slave Port detected: COM10
14:31:04| Opening Port!
14:31:04| INIT MASTER…OK!
14:31:04| PHONE INFO SAMPLED…OK!
14:31:04| EPOC APPLET HEADER SENT…OK!
14:31:04| APPLET BODY SENT…OK!
14:31:04| SHUTTING DOWN MASTER…OK!
14:31:06| Baseband ID: 7100
14:31:06| Protocol Version: 3.1
14:31:06| NEW SECURITY PHONE DETECTED! SWITCHING…
14:31:07| Speed set to 460800
14:31:07|
14:31:07| Sending db2000_cid03_prodid_p3b.bin…
14:31:08| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:31:08| This is a PRODUCTION_ID loader
14:31:08| Activating GDFS…
14:31:08| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:31:08| …using IMEI name
14:31:08|
14:31:08| Profiling EPOC smartphone…
14:31:08| Platform: DB2001
14:31:08| OTP CID: 52
14:31:08| EROM CID: 53
14:31:08| EROM Color: Red
14:31:08| IMEI: 35703301xxxxxx
14:31:08| Phone ID: P1
14:31:08| Part Number: ›b¢ÐA
14:31:08| Phone smartphone version: R1C01
14:31:08| Phone software version:
14:31:08| Processing Unit:
14:31:08| Organizer:
14:31:08| CDA:
14:31:08|
14:31:08| … and the phone lock code is: 1081EE09 (only 80 digits)
14:31:08|
14:31:08| Ready for operation!
14:31:18|
14:31:18| Sending db2001_cid53red_cs_p1e.bin…
14:33:20| Sendinging shutdown signal to phone…
14:33:22| Shutting down…
14:33:37| XS++ v3.1 (Darwin) Ready !
14:33:37| Executed on Microsoft Windows XP
14:33:53| Executing SEMC Smartphone Operations!
14:33:53| Please hold boot key (‘@’ or ‘C’) and connect device…
14:34:32| Disconnected… Unplug the phone
14:34:34| Shutting down…
14:34:43| XS++ v3.1 (Darwin) Ready !
14:34:43| Executed on Microsoft Windows XP
14:34:49| Executing SEMC Smartphone Operations!
14:34:49| Please hold boot key (‘@’ or ‘C’) and connect device…
14:35:16| Disconnected… Unplug the phone
14:35:19| Shutting down…
14:35:35| XS++ v3.1 (Darwin) Ready !
14:35:35| Executed on Microsoft Windows XP
14:35:53| Executing SEMC Smartphone Operations!
14:35:53| Please hold boot key (‘@’ or ‘C’) and connect device…
14:36:22| Disconnected… Unplug the phone
14:36:27| Shutting down…
14:37:14| XS++ v3.1 (Darwin) Ready !
14:37:14| Executed on Microsoft Windows XP
14:37:21| Executing SEMC Smartphone Operations!
14:37:21| Please hold boot key (‘@’ or ‘C’) and connect device…
14:37:33| Master Port detected: COM9
14:37:33| Slave Port detected: COM10
14:37:33| Opening Port!
14:37:33| INIT MASTER…OK!
14:37:33| PHONE INFO SAMPLED…OK!
14:37:33| EPOC APPLET HEADER SENT…OK!
14:37:33| APPLET BODY SENT…OK!
14:37:33| SHUTTING DOWN MASTER…OK!
14:37:35| Baseband ID: 7100
14:37:35| Protocol Version: 3.1
14:37:35| NEW SECURITY PHONE DETECTED! SWITCHING…
14:37:36| Speed set to 460800
14:37:36|
14:37:36| Sending db2000_cid03_prodid_p3b.bin…
14:37:38| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:37:38| This is a PRODUCTION_ID loader
14:37:38| Activating GDFS…
14:37:38| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:37:38| …using IMEI name
14:37:38|
14:37:38| Profiling EPOC smartphone…
14:37:38| Platform: DB2001
14:37:38| OTP CID: 52
14:37:38| EROM CID: 53
14:37:38| EROM Color: Red
14:37:38| IMEI: 35703301xxxxxx
14:37:38| Phone ID: P1
14:37:38| Part Number: ›b¢ÐA
14:37:38| Phone smartphone version: R1C01
14:37:38| Phone software version:
14:37:38| Processing Unit:
14:37:38| Organizer:
14:37:38| CDA:
14:37:38|
14:37:38| … and the phone lock code is: 1081EE09 (only 80 digits)
14:37:38|
14:37:38| Ready for operation!
14:37:44|
14:37:44| Sending db2001_cid53red_cs_p1e.bin…
14:41:17| Sendinging shutdown signal to phone…
14:41:19| Shutting down…
14:41:32| XS++ v3.1 (Darwin) Ready !
14:41:32| Executed on Microsoft Windows XP
14:41:53| Executing SEMC Smartphone Operations!
14:41:53| Please hold boot key (‘@’ or ‘C’) and connect device…
14:42:28| Disconnected… Unplug the phone
14:42:31| Shutting down…
14:42:45| XS++ v3.1 (Darwin) Ready !
14:42:45| Executed on Microsoft Windows XP
14:42:53| Executing SEMC Smartphone Operations!
14:42:53| Please hold boot key (‘@’ or ‘C’) and connect device…
14:43:05| Master Port detected: COM9
14:43:05| Slave Port detected: COM10
14:43:05| Opening Port!
14:43:05| INIT MASTER…OK!
14:43:05| PHONE INFO SAMPLED…OK!
14:43:05| EPOC APPLET HEADER SENT…OK!
14:43:05| APPLET BODY SENT…OK!
14:43:05| SHUTTING DOWN MASTER…OK!
14:43:07| Baseband ID: 7100
14:43:07| Protocol Version: 3.1
14:43:07| NEW SECURITY PHONE DETECTED! SWITCHING…
14:43:08| Speed set to 460800
14:43:08|
14:43:08| Sending db2000_cid03_prodid_p3b.bin…
14:43:09| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:43:09| This is a PRODUCTION_ID loader
14:43:09| Activating GDFS…
14:43:09| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:43:09| …using IMEI name
14:43:09|
14:43:09| Profiling EPOC smartphone…
14:43:09| Platform: DB2001
14:43:09| OTP CID: 52
14:43:09| EROM CID: 53
14:43:09| EROM Color: Red
14:43:09| IMEI: 35703301xxxxxx
14:43:09| Phone ID: P1
14:43:09| Part Number: ›`¢ÐA
14:43:09| Phone smartphone version: R1C01
14:43:09| Phone software version:
14:43:09| Processing Unit:
14:43:10| Organizer:
14:43:10| CDA:
14:43:10|
14:43:10| … and the phone lock code is: 1081EE09 (only 80 digits)
14:43:10|
14:43:10| Ready for operation!
14:43:18|
14:43:18| Sending db2001_cid53red_cs_p1e.bin…
14:43:18| Binary acknowledge failed with: 00
14:43:18| Command: Error 0x00
14:43:18| Header: Error 0x00
14:43:18| Error: Failed to send CSLoader!
14:43:18| FSX Shutdown!
14:43:20| Disconnected… Unplug the phone
14:43:41| Shutting down…
14:43:51| XS++ v3.1 (Darwin) Ready !
14:43:51| Executed on Microsoft Windows XP
14:43:58| Executing SEMC Smartphone Operations!
14:43:58| Please hold boot key (‘@’ or ‘C’) and connect device…
14:44:29| Disconnected… Unplug the phone
14:44:41| Executing SEMC Smartphone Operations!
14:44:41| Please hold boot key (‘@’ or ‘C’) and connect device…
14:45:11| Disconnected… Unplug the phone
14:45:13| Shutting down…
14:45:33| XS++ v3.1 (Darwin) Ready !
14:45:33| Executed on Microsoft Windows XP
14:45:43| Executing SEMC Smartphone Operations!
14:45:43| Please hold boot key (‘@’ or ‘C’) and connect device…
14:45:56| Master Port detected: COM9
14:45:56| Slave Port detected: COM10
14:45:56| Opening Port!
14:45:56| INIT MASTER…OK!
14:45:56| PHONE INFO SAMPLED…OK!
14:45:57| EPOC APPLET HEADER SENT…OK!
14:45:57| APPLET BODY SENT…OK!
14:45:57| SHUTTING DOWN MASTER…OK!
14:45:58| Baseband ID: 7100
14:45:58| Protocol Version: 3.1
14:45:58| NEW SECURITY PHONE DETECTED! SWITCHING…
14:45:59| Speed set to 460800
14:45:59|
14:46:00| Sending db2000_cid03_prodid_p3b.bin…
14:46:01| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:46:01| This is a PRODUCTION_ID loader
14:46:01| Activating GDFS…
14:46:01| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:46:01| …using IMEI name
14:46:01|
14:46:01| Profiling EPOC smartphone…
14:46:01| Platform: DB2001
14:46:01| OTP CID: 52
14:46:01| EROM CID: 53
14:46:01| EROM Color: Red
14:46:01| IMEI: 35703301xxxxxx
14:46:01| Phone ID: P1
14:46:01| Part Number: ›`¢ÐA
14:46:01| Phone smartphone version: R1C01
14:46:01| Phone software version:
14:46:01| Processing Unit:
14:46:01| Organizer:
14:46:01| CDA:
14:46:01|
14:46:01| … and the phone lock code is: 1081EE09 (only 80 digits)
14:46:01|
14:46:01| Ready for operation!
14:46:07|
14:46:07| Sending db2001_cid53red_cs_p1e.bin…
14:49:55| Sendinging shutdown signal to phone…
14:49:57| Shutting down…
14:50:13| XS++ v3.1 (Darwin) Ready !
14:50:13| Executed on Microsoft Windows XP
14:50:20| Executing SEMC Smartphone Operations!
14:50:20| Please hold boot key (‘@’ or ‘C’) and connect device…
14:50:34| Master Port detected: COM9
14:50:34| Slave Port detected: COM10
14:50:34| Opening Port!
14:50:34| INIT MASTER…OK!
14:50:34| PHONE INFO SAMPLED…OK!
14:50:34| EPOC APPLET HEADER SENT…OK!
14:50:34| APPLET BODY SENT…OK!
14:50:34| SHUTTING DOWN MASTER…OK!
14:50:36| Baseband ID: 7100
14:50:36| Protocol Version: 3.1
14:50:36| NEW SECURITY PHONE DETECTED! SWITCHING…
14:50:37| Speed set to 460800
14:50:37|
14:50:37| Sending db2000_cid03_prodid_p3b.bin…
14:50:38| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
14:50:38| This is a PRODUCTION_ID loader
14:50:38| Activating GDFS…
14:50:38| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
14:50:38| …using IMEI name
14:50:38|
14:50:38| Profiling EPOC smartphone…
14:50:38| Platform: DB2001
14:50:38| OTP CID: 52
14:50:38| EROM CID: 53
14:50:38| EROM Color: Red
14:50:38| IMEI: 35703301xxxxxx
14:50:38| Phone ID: P1
14:50:38| Part Number: ›b¢ÐA
14:50:38| Phone smartphone version: R1C01
14:50:38| Phone software version:
14:50:38| Processing Unit:
14:50:38| Organizer:
14:50:38| CDA:
14:50:38|
14:50:38| … and the phone lock code is: 1081EE09 (only 80 digits)
14:50:38|
14:50:38| Ready for operation!
14:50:45|
14:50:45| Sending db2001_cid53red_cs_p1e.bin…
14:52:16| Sendinging shutdown signal to phone…
14:52:18| Shutting down…
17:21:47| XS++ v3.1 (Darwin) Ready !
17:21:47| Executed on Microsoft Windows XP
17:22:02| Executing SEMC Smartphone Operations!
17:22:02| Please hold boot key (‘@’ or ‘C’) and connect device…
17:22:27| Master Port detected: COM9
17:22:27| Slave Port detected: COM10
17:22:27| Opening Port!
17:22:27| INIT MASTER…OK!
17:22:27| PHONE INFO SAMPLED…OK!
17:22:27| EPOC APPLET HEADER SENT…OK!
17:22:27| APPLET BODY SENT…OK!
17:22:27| SHUTTING DOWN MASTER…OK!
17:22:29| Baseband ID: 7100
17:22:29| Protocol Version: 3.1
17:22:29| NEW SECURITY PHONE DETECTED! SWITCHING…
17:22:30| Speed set to 460800
17:22:30|
17:22:30| Sending db2000_cid03_prodid_p3b.bin…
17:22:31| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
17:22:31| This is a PRODUCTION_ID loader
17:22:31| Activating GDFS…
17:22:32| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
17:22:32| …using IMEI name
17:22:32|
17:22:32| Profiling EPOC smartphone…
17:22:32| Platform: DB2001
17:22:32| OTP CID: 52
17:22:32| EROM CID: 53
17:22:32| EROM Color: Red
17:22:32| IMEI: 35703301xxxxxx
17:22:32| Phone ID: P1
17:22:32| Part Number: ›b¢ÐA
17:22:32| Phone smartphone version: R1C01
17:22:32| Phone software version:
17:22:32| Processing Unit:
17:22:32| Organizer:
17:22:32| CDA:
17:22:32|
17:22:32| … and the phone lock code is: 1081EE09 (only 80 digits)
17:22:32|
17:22:32| Ready for operation!
17:22:42|
17:22:42| Sending db2001_cid53red_cs_p1e.bin…
17:24:35| Sendinging shutdown signal to phone…
17:24:37| Shutting down…
17:27:41| XS++ v3.1 (Darwin) Ready !
17:27:41| Executed on Microsoft Windows XP
17:27:48| Executing SEMC Smartphone Operations!
17:27:48| Please hold boot key (‘@’ or ‘C’) and connect device…
17:28:08| Disconnected… Unplug the phone
17:28:25| Shutting down…
17:28:38| XS++ v3.1 (Darwin) Ready !
17:28:38| Executed on Microsoft Windows XP
17:28:44| Executing SEMC Smartphone Operations!
17:28:44| Please hold boot key (‘@’ or ‘C’) and connect device…
17:28:59| Sorry, your phone is NOT SUPPORTED
17:28:59| Sendinging shutdown signal to phone…
17:29:01| Shutting down…
17:29:18| XS++ v3.1 (Darwin) Ready !
17:29:18| Executed on Microsoft Windows XP
17:29:24| Executing SEMC Smartphone Operations!
17:29:24| Please hold boot key (‘@’ or ‘C’) and connect device…
17:29:54| Disconnected… Unplug the phone
17:30:10| Shutting down…
17:30:21| XS++ v3.1 (Darwin) Ready !
17:30:21| Executed on Microsoft Windows XP
17:30:27| Executing SEMC Smartphone Operations!
17:30:27| Please hold boot key (‘@’ or ‘C’) and connect device…
17:30:54| Disconnected… Unplug the phone
17:32:18| Shutting down…
17:41:29| XS++ v3.1 (Darwin) Ready !
17:41:29| Executed on Microsoft Windows XP
17:41:38| Executing SEMC Smartphone Operations!
17:41:38| Please hold boot key (‘@’ or ‘C’) and connect device…
17:41:49| Master Port detected: COM9
17:41:49| Slave Port detected: COM10
17:41:50| Opening Port!
17:41:50| INIT MASTER…OK!
17:41:50| PHONE INFO SAMPLED…OK!
17:41:50| EPOC APPLET HEADER SENT…OK!
17:41:50| APPLET BODY SENT…OK!
17:41:50| SHUTTING DOWN MASTER…OK!
17:41:52| Baseband ID: 7100
17:41:52| Protocol Version: 3.1
17:41:52| NEW SECURITY PHONE DETECTED! SWITCHING…
17:41:53| Speed set to 460800
17:41:53|
17:41:53| Sending db2000_cid03_prodid_p3b.bin…
17:41:54| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
17:41:54| This is a PRODUCTION_ID loader
17:41:54| Activating GDFS…
17:41:54| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
17:41:54| …using IMEI name
17:41:54|
17:41:54| Profiling EPOC smartphone…
17:41:54| Platform: DB2001
17:41:54| OTP CID: 52
17:41:54| EROM CID: 53
17:41:54| EROM Color: Red
17:41:54| IMEI: 35703301xxxxxx
17:41:54| Phone ID: P1
17:41:54| Part Number: ›b¢ÐA
17:41:54| Phone smartphone version: R1C01
17:41:54| Phone software version:
17:41:54| Processing Unit:
17:41:54| Organizer:
17:41:54| CDA:
17:41:54|
17:41:54| … and the phone lock code is: 1081EE09 (only 80 digits)
17:41:54|
17:41:54| Ready for operation!
17:42:05|
17:42:05| Sending db2001_cid53red_cs_p1e.bin…
17:42:13| Binary acknowledge failed with: 15
17:42:13| Command: Error 0x15
17:42:13| Payload: Error 0x00
17:42:13| Error: Failed to send CSLoader!
17:42:13| FSX Shutdown!
17:42:15| Disconnected… Unplug the phone
17:42:29| Executing SEMC Smartphone Operations!
17:42:29| Please hold boot key (‘@’ or ‘C’) and connect device…
17:42:46| Master Port detected: COM9
17:42:46| Slave Port detected: COM10
17:42:46| Opening Port!
17:42:46| INIT MASTER…OK!
17:42:46| PHONE INFO SAMPLED…OK!
17:42:46| EPOC APPLET HEADER SENT…OK!
17:42:46| APPLET BODY SENT…OK!
17:42:46| SHUTTING DOWN MASTER…OK!
17:42:48| Baseband ID: 7100
17:42:48| Protocol Version: 3.1
17:42:48| NEW SECURITY PHONE DETECTED! SWITCHING…
17:42:49| Speed set to 460800
17:42:49|
17:42:49| Sending db2000_cid03_prodid_p3b.bin…
17:42:50| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
17:42:50| This is a PRODUCTION_ID loader
17:42:51| Activating GDFS…
17:42:51| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
17:42:51| …using IMEI name
17:42:51|
17:42:51| Profiling EPOC smartphone…
17:42:51| Platform: DB2001
17:42:51| OTP CID: 52
17:42:51| EROM CID: 53
17:42:51| EROM Color: Red
17:42:51| IMEI: 35703301xxxxxx
17:42:51| Phone ID: P1
17:42:51| Part Number: ›`¢ÐA
17:42:51| Phone smartphone version: R1C01
17:42:51| Phone software version:
17:42:51| Processing Unit:
17:42:51| Organizer:
17:42:51| CDA:
17:42:51|
17:42:51| … and the phone lock code is: 1081EE09 (only 149 digits)
17:42:51|
17:42:51| Ready for operation!
17:43:08|
17:43:08| Sending db2001_cid53red_cs_p1e.bin…
17:43:24| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
17:43:24| This is a CHIPSELECT loader
17:43:24| Activating loader…
17:43:24| Activating GDFS…
17:45:32| Sendinging shutdown signal to phone…
17:45:34| Shutting down…
17:45:46| XS++ v3.1 (Darwin) Ready !
17:45:46| Executed on Microsoft Windows XP
17:45:57| Executing SEMC Smartphone Operations!
17:45:57| Please hold boot key (‘@’ or ‘C’) and connect device…
17:46:07| Master Port detected: COM9
17:46:07| Slave Port detected: COM10
17:46:07| Opening Port!
17:46:07| INIT MASTER…OK!
17:46:07| PHONE INFO SAMPLED…OK!
17:46:07| EPOC APPLET HEADER SENT…OK!
17:46:07| APPLET BODY SENT…OK!
17:46:07| SHUTTING DOWN MASTER…OK!
17:46:09| Baseband ID: 7100
17:46:09| Protocol Version: 3.1
17:46:09| NEW SECURITY PHONE DETECTED! SWITCHING…
17:46:10| Speed set to 460800
17:46:10|
17:46:10| Sending db2000_cid03_prodid_p3b.bin…
17:46:11| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
17:46:11| This is a PRODUCTION_ID loader
17:46:11| Activating GDFS…
17:46:11| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
17:46:11| …using IMEI name
17:46:11|
17:46:11| Profiling EPOC smartphone…
17:46:11| Platform: DB2001
17:46:11| OTP CID: 52
17:46:12| EROM CID: 53
17:46:12| EROM Color: Red
17:46:12| IMEI: 35703301xxxxxx
17:46:12| Phone ID: P1
17:46:12| Part Number: ›b¢ÐA
17:46:12| Phone smartphone version: R1C01
17:46:12| Phone software version:
17:46:12| Processing Unit:
17:46:12| Organizer:
17:46:12| CDA:
17:46:12|
17:46:12| … and the phone lock code is: 1081EE09 (only 80 digits)
17:46:12|
17:46:12| Ready for operation!
17:46:19|
17:46:19| Sending db2001_cid53red_cs_p1e.bin…
17:46:35| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
17:46:35| This is a CHIPSELECT loader
17:46:35| Activating loader…
17:46:35| Activating GDFS…
17:51:11| Sendinging shutdown signal to phone…
17:51:13| Shutting down…
17:51:37| XS++ v3.1 (Darwin) Ready !
17:51:37| Executed on Microsoft Windows XP
17:51:44| Executing SEMC Smartphone Operations!
17:51:44| Please hold boot key (‘@’ or ‘C’) and connect device…
17:51:57| Master Port detected: COM9
17:51:57| Slave Port detected: COM10
17:51:57| Opening Port!
17:51:57| INIT MASTER…OK!
17:51:57| PHONE INFO SAMPLED…OK!
17:51:57| EPOC APPLET HEADER SENT…OK!
17:51:57| APPLET BODY SENT…OK!
17:51:57| SHUTTING DOWN MASTER…OK!
17:53:44| Disconnected… Unplug the phone
17:54:04| Shutting down…
17:54:13| XS++ v3.1 (Darwin) Ready !
17:54:13| Executed on Microsoft Windows XP
17:54:21| Executing SEMC Smartphone Operations!
17:54:21| Please hold boot key (‘@’ or ‘C’) and connect device…
17:54:39| Disconnected… Unplug the phone
17:54:40| Shutting down…
17:55:15| XS++ v3.1 (Darwin) Ready !
17:55:15| Executed on Microsoft Windows XP
17:55:23| Executing SEMC Smartphone Operations!
17:55:23| Please hold boot key (‘@’ or ‘C’) and connect device…
17:55:41| Disconnected… Unplug the phone
17:55:42| Shutting down…
18:04:00| XS++ v3.1 (Darwin) Ready !
18:04:00| Executed on Microsoft Windows XP
18:04:10| Executing SEMC Smartphone Operations!
18:04:10| Please hold boot key (‘@’ or ‘C’) and connect device…
18:04:20| Master Port detected: COM9
18:04:20| Slave Port detected: COM10
18:04:20| Opening Port!
18:04:20| INIT MASTER…OK!
18:04:20| PHONE INFO SAMPLED…OK!
18:04:21| EPOC APPLET HEADER SENT…OK!
18:04:21| APPLET BODY SENT…OK!
18:04:21| SHUTTING DOWN MASTER…OK!
18:04:22| Baseband ID: 7100
18:04:22| Protocol Version: 3.1
18:04:22| NEW SECURITY PHONE DETECTED! SWITCHING…
18:04:23| Speed set to 460800
18:04:23|
18:04:24| Sending db2000_cid03_prodid_p3b.bin…
18:04:25| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
18:04:25| This is a PRODUCTION_ID loader
18:04:25| Activating GDFS…
18:04:25| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
18:04:25| …using IMEI name
18:04:25|
18:04:25| Profiling EPOC smartphone…
18:04:25| Platform: DB2001
18:04:25| OTP CID: 52
18:04:25| EROM CID: 53
18:04:25| EROM Color: Red
18:04:25| IMEI: 35703301xxxxxx
18:04:25| Phone ID: P1
18:04:25| Part Number: ›`¢ÐA
18:04:25| Phone smartphone version: R1C01
18:04:25| Phone software version:
18:04:25| Processing Unit:
18:04:25| Organizer:
18:04:25| CDA:
18:04:25|
18:04:25| … and the phone lock code is: 1081EE09 (only 80 digits)
18:04:25|
18:04:25| Ready for operation!
18:04:35|
18:04:35| Sending db2001_cid53red_cs_p1e.bin…
18:04:52| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
18:04:52| This is a CHIPSELECT loader
18:04:52| Activating loader…
18:04:52| Activating GDFS…
18:06:41| Sendinging shutdown signal to phone…
18:06:43| Shutting down…
18:09:22| XS++ v3.1 (Darwin) Ready !
18:09:22| Executed on Microsoft Windows XP
18:10:09| Executing SEMC Smartphone Operations!
18:10:09| Please hold boot key (‘@’ or ‘C’) and connect device…
18:10:32| Master Port detected: COM9
18:10:32| Slave Port detected: COM10
18:10:32| Opening Port!
18:10:32| INIT MASTER…OK!
18:10:32| PHONE INFO SAMPLED…OK!
18:10:32| EPOC APPLET HEADER SENT…OK!
18:10:32| APPLET BODY SENT…OK!
18:10:33| SHUTTING DOWN MASTER…OK!
18:10:34| Baseband ID: 7100
18:10:34| Protocol Version: 3.1
18:10:34| NEW SECURITY PHONE DETECTED! SWITCHING…
18:10:35| Speed set to 460800
18:10:35|
18:10:35| Sending db2000_cid03_prodid_p3b.bin…
18:11:32| Disconnected… Unplug the phone
18:11:42| Shutting down…
18:11:53| XS++ v3.1 (Darwin) Ready !
18:11:53| Executed on Microsoft Windows XP
18:12:07| Executing SEMC Smartphone Operations!
18:12:07| Please hold boot key (‘@’ or ‘C’) and connect device…
18:12:18| Master Port detected: COM9
18:12:18| Slave Port detected: COM10
18:12:18| Opening Port!
18:12:18| INIT MASTER…OK!
18:12:18| PHONE INFO SAMPLED…OK!
18:12:18| EPOC APPLET HEADER SENT…OK!
18:12:18| APPLET BODY SENT…OK!
18:12:18| SHUTTING DOWN MASTER…OK!
18:12:20| Baseband ID: 7100
18:12:20| Protocol Version: 3.1
18:12:20| NEW SECURITY PHONE DETECTED! SWITCHING…
18:12:21| Speed set to 460800
18:12:21|
18:12:21| Sending db2000_cid03_prodid_p3b.bin…
18:12:22| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
18:12:22| This is a PRODUCTION_ID loader
18:12:22| Activating GDFS…
18:12:23| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
18:12:23| …using IMEI name
18:12:23|
18:12:23| Profiling EPOC smartphone…
18:12:23| Platform: DB2001
18:12:23| OTP CID: 52
18:12:23| EROM CID: 53
18:12:23| EROM Color: Red
18:12:23| IMEI: 35703301xxxxxx
18:12:23| Phone ID: P1
18:12:23| Part Number: ›b¢ÐA
18:12:23| Phone smartphone version: R1C01
18:12:23| Phone software version:
18:12:23| Processing Unit:
18:12:23| Organizer:
18:12:23| CDA:
18:12:23|
18:12:23| … and the phone lock code is: 1081EE09 (only 80 digits)
18:12:23|
18:12:23| Ready for operation!
18:12:40|
18:12:40| Parsing package contents…
18:12:40| CCPU (BABE) file: CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
18:12:40| CCPU (BABE) file: CCPU_Signaling_SW_R9H004R_RED53.software
18:12:49|
18:12:49| SMARTPHONE WILL BE FLASHED IN 1 PHASE!
18:12:49|
18:12:49| [———- PHASE 2 ———-]
18:12:49|
18:12:49| Sending db2001_cid53red_flash_r1a003.bin…
18:12:49| Binary acknowledge failed with: 60
18:12:49| Command: Error 0x60
18:13:46| Sendinging shutdown signal to phone…
18:13:48| Shutting down…
18:14:00| XS++ v3.1 (Darwin) Ready !
18:14:00| Executed on Microsoft Windows XP
18:14:07| Executing SEMC Smartphone Operations!
18:14:07| Please hold boot key (‘@’ or ‘C’) and connect device…
18:14:18| Master Port detected: COM9
18:14:18| Slave Port detected: COM10
18:14:18| Opening Port!
18:14:18| INIT MASTER…OK!
18:14:18| PHONE INFO SAMPLED…OK!
18:14:18| EPOC APPLET HEADER SENT…OK!
18:14:18| APPLET BODY SENT…OK!
18:14:18| SHUTTING DOWN MASTER…OK!
18:14:20| Baseband ID: 7100
18:14:20| Protocol Version: 3.1
18:14:20| NEW SECURITY PHONE DETECTED! SWITCHING…
18:14:21| Speed set to 460800
18:14:21|
18:14:21| Sending db2000_cid03_prodid_p3b.bin…
18:14:22| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
18:14:22| This is a PRODUCTION_ID loader
18:14:23| Activating GDFS…
18:14:23| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:›)
18:14:23| …using IMEI name
18:14:23|
18:14:23| Profiling EPOC smartphone…
18:14:23| Platform: DB2001
18:14:23| OTP CID: 52
18:14:23| EROM CID: 53
18:14:23| EROM Color: Red
18:14:23| IMEI: 35703301xxxxxx
18:14:23| Phone ID: P1
18:14:23| Part Number: ›`¢ÐA
18:14:23| Phone smartphone version: R1C01
18:14:23| Phone software version:
18:14:23| Processing Unit:
18:14:23| Organizer:
18:14:23| CDA:
18:14:23|
18:14:23| … and the phone lock code is: 1081EE09 (only 80 digits)
18:14:23|
18:14:23| Ready for operation!
18:14:33|
18:14:33| Parsing package contents…
18:14:33| CCPU (BABE) file: CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
18:14:33| CCPU (BABE) file: CCPU_Signaling_SW_R9H004R_RED53.software
18:14:35|
18:14:35| SMARTPHONE WILL BE FLASHED IN 1 PHASE!
18:14:35|
18:14:35| [———- PHASE 2 ———-]
18:14:35|
18:14:35| Sending db2001_cid53red_flash_r1a003.bin…
18:14:36| Applet ID: 060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
18:14:36| This is a FLASH loader
18:14:37| Flashing CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
18:14:37| Header type: BABE
18:14:37| 107 flashblocks
18:20:49| Sendinging shutdown signal to phone…
18:20:51| Shutting down…
18:21:17| XS++ v3.1 (Darwin) Ready !
18:21:17| Executed on Microsoft Windows XP
18:21:24| Executing SEMC Smartphone Operations!
18:21:24| Please hold boot key (‘@’ or ‘C’) and connect device…
18:21:55| Disconnected… Unplug the phone
18:21:57| Shutting down…
18:22:07| XS++ v3.1 (Darwin) Ready !
18:22:07| Executed on Microsoft Windows XP
18:22:16| Executing SEMC Smartphone Operations!
18:22:16| Please hold boot key (‘@’ or ‘C’) and connect device…
18:22:49| Sorry, your phone is NOT SUPPORTED
18:22:49| Sendinging shutdown signal to phone…
18:22:51| Shutting down…
18:31:30| XS++ v3.1 (Darwin) Ready !
18:31:30| Executed on Microsoft Windows XP
18:31:39| Executing SEMC Smartphone Operations!
18:31:39| Please hold boot key (‘@’ or ‘C’) and connect device…
18:32:00| Master Port detected: COM9
18:32:00| Slave Port detected: COM10
18:32:00| Opening Port!
18:32:00| INIT MASTER…OK!
18:32:00| PHONE INFO SAMPLED…OK!
18:32:00| EPOC APPLET HEADER SENT…OK!
18:32:00| APPLET BODY SENT…OK!
18:32:00| SHUTTING DOWN MASTER…OK!
19:03:08| XS++ v3.1 (Darwin) Ready !
19:03:08| Executed on Microsoft Windows XP
19:03:24| Executing SEMC Smartphone Operations!
19:03:24| Please hold boot key (‘@’ or ‘C’) and connect device…
19:03:46| Master Port detected: COM9
19:03:46| Slave Port detected: COM10
19:03:46| Opening Port!
19:03:46| INIT MASTER…OK!
19:03:46| PHONE INFO SAMPLED…OK!
19:03:46| EPOC APPLET HEADER SENT…OK!
19:03:46| APPLET BODY SENT…OK!
19:03:46| SHUTTING DOWN MASTER…OK!
19:03:48| Baseband ID: 7100
19:03:48| Protocol Version: 3.1
19:03:48| NEW SECURITY PHONE DETECTED! SWITCHING…
19:03:49| Speed set to 460800
19:03:49|
19:03:49| Sending db2000_cid03_prodid_p3b.bin…
19:03:51| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
19:03:51| This is a PRODUCTION_ID loader
19:03:51| Activating GDFS…
19:03:51| Cannot open GDFS
19:03:51| Activating GDFS…
19:03:51| Cannot open GDFS
19:03:51| Activating GDFS…
19:03:51| Cannot open GDFS
19:03:51| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)
19:03:51| …using IMEI name
19:03:51|
19:03:51| Profiling EPOC smartphone…
19:03:51| Platform: DB2001
19:03:51| OTP CID: 52
19:03:51| EROM CID: 53
19:03:51| EROM Color: Red
19:03:51| IMEI: 35703301xxxxxx
19:03:51| Phone ID: P1
19:03:51| Part Number: n/a
19:03:51| Phone smartphone version: R1C01
19:03:51| Phone software version:
19:03:51| Processing Unit:
19:03:51| Organizer:
19:03:51| CDA:
19:03:51| Activating GDFS…
19:03:51| Cannot open GDFS
19:03:51| Ready for operation!
19:04:24|
19:04:24| Parsing package contents…
19:04:24| CCPU (BABE) file: CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
19:04:24| CCPU (BABE) file: CCPU_Signaling_SW_R9H004R_RED53.software
19:04:26|
19:04:26| SMARTPHONE WILL BE FLASHED IN 1 PHASE!
19:04:26|
19:04:26| [———- PHASE 2 ———-]
19:04:26|
19:04:26| Sending db2001_cid53red_flash_r1a003.bin…
19:04:28| Applet ID: 060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
19:04:28| This is a FLASH loader
19:04:28| Flashing CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
19:04:28| Header type: BABE
19:04:28| 107 flashblocks
19:05:37| Sendinging shutdown signal to phone…
19:05:39| Shutting down…
19:05:59| XS++ v3.1 (Darwin) Ready !
19:05:59| Executed on Microsoft Windows XP
19:06:05| Executing SEMC Smartphone Operations!
19:06:05| Please hold boot key (‘@’ or ‘C’) and connect device…
19:06:20| Master Port detected: COM9
19:06:20| Slave Port detected: COM10
19:06:20| Opening Port!
19:06:20| INIT MASTER…OK!
19:06:20| PHONE INFO SAMPLED…OK!
19:06:20| EPOC APPLET HEADER SENT…OK!
19:06:20| APPLET BODY SENT…OK!
19:06:20| SHUTTING DOWN MASTER…OK!
19:06:22| Baseband ID: 7100
19:06:22| Protocol Version: 3.1
19:06:22| NEW SECURITY PHONE DETECTED! SWITCHING…
19:06:23| Speed set to 460800
19:06:23|
19:06:23| Sending db2000_cid03_prodid_p3b.bin…
19:06:24| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
19:06:24| This is a PRODUCTION_ID loader
19:06:25| Activating GDFS…
19:06:25| Cannot open GDFS
19:06:25| Activating GDFS…
19:06:25| Cannot open GDFS
19:06:25| Activating GDFS…
19:06:25| Cannot open GDFS
19:06:25| Warning: IMEI name does not match GDFS name (IMEI:P1 GDFS:n/a)
19:06:25| …using IMEI name
19:06:25|
19:06:25| Profiling EPOC smartphone…
19:06:25| Platform: DB2001
19:06:25| OTP CID: 52
19:06:25| EROM CID: 53
19:06:25| EROM Color: Red
19:06:25| IMEI: 35703301xxxxxx
19:06:25| Phone ID: P1
19:06:25| Part Number: n/a
19:06:25| Phone smartphone version: R1C01
19:06:25| Phone software version:
19:06:25| Processing Unit:
19:06:25| Organizer:
19:06:25| CDA:
19:06:25| Activating GDFS…
19:06:25| Cannot open GDFS
19:06:25| Ready for operation!
19:06:44|
19:06:44| Parsing package contents…
19:06:44| CCPU (BABE) file: CCPU_Signaling_SW_CXC162037_R9H004_RED53.software
19:06:44| CCPU (BABE) file: CCPU_Signaling_SW_R9H004R_RED53.software
19:06:46|
19:06:46| SM
PS: I dont have a GDFS backup because i tried to back up ON XS++ many times and it keeps getting stuck on ….Activating GDFS.
sorrry CID53 is not supported really !! 🙁
setools is not identify my phoneee too ! akshay n petiii plz tell me wat i do plzzzzzzz
but when i connect my phone in usb cable its shows in device manager > universal serial bus controllers. generic flash device .
hey what kind of file should it be? is it .bin .gdf or .sbn
im not so sure …. also does it take a while foe the please wait bar to load?
it is .bin
and its all done i a few minutes.
Hello sir ,
I tried to flash my phone from S500i to W580i
But i ended up with a flashed version with a to big resolution everything @ my phone looks big now its horrible the bits changed tho i think and i dont got the Dutch language i need
Please help me out as soon as possible..
my w880i has a white blank screen of death, i tried to restore its orig gdfs but it tooks too long to activate.whats the problem pls help me…
plss help me with this
11:22:18| Sending db2020_cid01_prodid_p3j.bin…
11:22:18| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
11:22:18| This is a PRODUCTION_ID loader
11:22:18|
11:22:18| Sending db2020_mem_patcher_cid52_r2a006.bin…
11:22:19| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
11:22:19| This is a MEM_PATCHER loader
11:22:19|
11:22:19| Sending db2020_red52_cs_r3a009.bin…
11:22:20| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
11:22:20| This is a CHIPSELECT loader
11:22:20| Activating loader…
11:22:20| Activating GDFS…
this is the part where i stucked up
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition – please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35159602342497 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:25 secs.
this appears when i tried to it ti setool
Hello Ashkay,,
I got problem with my W880 i
I removed the original camdriver1.dat
but my back camera didnt start.
I want to download the original camdriver1 for w880
do you have it?
I’ve W810 🙁 My silly brother wrote GDFS from another phone into it 🙁
I don’t have a backup…
I tried disable OTP – GDFS check patches but they don’t seem to work… What can be done now… ?
Thanks..
21:08:02| XS++ v3.1 (Darwin) Ready !
21:08:02| Executed on Microsoft Windows XP
21:08:07|
21:08:07| Attempting to open the interface…
21:08:07|
21:08:07| TURN OFF PHONE!
21:08:07| Hold ‘C’ button on phone and connect phone NOW.
21:08:07| You have 30 seconds…
21:08:07|
21:08:18| Baseband ID: 9900
21:08:18| Protocol Version: 3.1
21:08:18| Warning: IMEI name does not match GDFS name (IMEI:K790 GDFS:K800)
21:08:18| …using IMEI name
21:08:18|
21:08:18| Profiling SEMC phone…
21:08:18| Platform: DB2020
21:08:18| OTP CID: 49
21:08:18| EROM CID: 51
21:08:18| EROM Color: Red
21:08:18| IMEI: 35220601xxxxxx
21:08:18| Phone ID: K790
21:08:18| Region: APAC
21:08:18| CDA: CDA12345678/123 R2A
21:08:18| Firmware Version: R1JC002
21:08:18| EROM: R3A016
21:08:18| Ready for operation!
21:08:32|
My K790i was no network coverage when my K790 reflashed by a stupid service station..
They using firmware K800 to my phone,,,
It cause my phone can’t get operator network now,,,
my K790 is work but no network coverage,,,
can you help me?
please give me a detil tutorial because I newbie,,
I’ve bring back to the stupid service station but they won’t responsible,,,!!!
Help me plis!!
As soon as posible,,,!!!
PS: after i installed XS++ and use to modding my menu, as automatic my CID change from 51 to 52 but the EROM is still 49
and it automatically make Backup folder that consist a script file with name “K790_35220601xxxxxx_GDFSSCRIPT_OUTPUT_080929213415.script” but the size is 0. whats is it?
Thanks before.
Regards,
sudirman_maliang
([email protected])
My K790i was no network coverage when my K790 reflashed by a stupid service station..
They using firmware K800 to my phone,,,
It cause my phone can’t get operator network now,,,
my K790 is work but no network coverage,,,
can you help me?
please give me a detil tutorial because I newbie,,
I’ve bring back to the stupid service station but they won’t responsible,,,!!!
Help me plis!!
As soon as posible,,,!!!
PS: after i installed XS++ and use to modding my menu, as automatic my CID change from 51 to 52 but the EROM is still 49
and it automatically make Backup folder that consist a script file with name “K790_35220601xxxxxx_GDFSSCRIPT_OUTPUT_080929213415.script” but the size is 0. whats is it?
Thanks before.
Regards,
sudirman_maliang
([email protected])
i just flash my k800 and after that i on my phone and it says no sim card inserted although i had inserted my sim card why was that?
@jeffrey
Uploaded the right custpack to fs???
hi guys i tried flashing my w980, but now after i try to on it dosent on, and i didnt noe i had to backup my GDFS! pls help me i m desperate. its a new phone pls help.
hay akshay.i want apply vkp patch in my k790(cid53) please help me
@sakthi
well…reflash it with a2 uploader…ur phone is a2 based so ull have to wait for phone xs!
Hiz…Ihave w580i..and its GDFS is damage when i try to On my Set just red lite blink..and XS++ didnt Detect My Phone.plz Help
Hey folks, need a bit of assistance!
My friend gave me his K800 when he upgraded, misinforming me that it was in fact a K790i (they do look very similiar, in fairness!). It was locked to 3 mobile, so I tried flashing it in order to unlock it. I followed the same procedure as the last phone I flashed (which turned out fine, it was a K610i), but I used the main and fs for a K790i for this one. I’m using XS++. Now my phone has the good old white screen of death, blinking on and off. I used the tutorial to restore the GDFS, but it hasn’t made a difference, still the white screen.
Is there any means of fixing it and unlocking it from 3?
Much appreciated!
Hye Akshayy!! need help.. my cousin mobile is Sony Ericsson W550, he can’t start his mobile.. only a white screen is appearing but nothing happen after that, he haven’t use any of this application yet.. do you have any suggestion how to fix it?? reply to my e-mail, thank you, it’s urgent.
@yuz
u only need to re flash it…
How to re flash it? what program i need to reflash it? please help. thank you.
@yuz
xs++ or jd flahser….if it is cid:53…then only jd flasher!
i ever use setool2lite for my cousin mobile, but i have no idea how to use it.. i will use XS++ once he had time to visit me again and does XS++ got all the flash files needed?? i think the CID was 40+ something, I don’t remember, but i remember the firmware was something similar to this name R4CB020_CXC1250086_CHINA_EL which i got from setool2lite.
@yuz
xs++ do not support cid:53 and a2 phones…else it gt evrything!
n d rest i am not getting
i know how to fix the gdfs error : 29 for k810i. so if anyone having that problem and cannot fix it, please don’t throw your phone away. i almost threw away my phone! lol
you have to take out your battery for a long time. i just wait 8 hours. then i try flashing again and it worked. i bricked my phone so many times flashing. but it’s fun.
Akshay,
My main and FS worked. I’m also stuck at “activating GDFS”. It’s a W580i that will not turn on because I used SE Update Services and it didn’t work. Help.
post log. is it CID53 ? then don’t make gdfs backup
omg how many damged gdfs cid 49,51,52,53 gdfs problems can now be fix with D-Ultimate Unlocker
if u need any help with it give me a shout and i will try my best
thanks, but is that free ?
you are the genius in fixing dead gdfs as far as i know. lol.
i did not back up the gdfs for my phone.. now i cant connect the phone on xs! help! what do i do now ashkay!
hey , i have flash my k530i to w660i but i dun qutie lyk it , is there any way to flash back ?
i flashed my s500 to upgrade it to w580 r8be001 … i flashed it and it has all patches as it was on r8ba024 and it restarted several time so.. i removed m2 then flashed but smthg happed it sya HR 1/2 i closed setool lite and flashed it with xs to orignal w580 r8ba024 firmware now its not starting
restoring gdfs said…
SENDING APPELATE CS
for 4 hrs
i cancelled it wat to do now
how to convert gdfs in ssw
Hi there. I restored the gdfs successfully yet I still get a configuration error. Is there anything else I can try?
@Naeem Chhutani
hey…well how are u????long time!
well use jdflasher….
when u connect holding ‘c’ key what does ur pc says?
red light blinking?
@Naeem Chhutani
man u con jump to forum
all remmber u there
@Justin
download cda pack acc to your region
search at google or 4shared
upload to tpa\preset\custom
URGENT: dear akshay/bhuvan
i have entered in to great trouble…. i flashed my w/850i phone using XS++,accidently i put the file system (.fbn) file in the main frame area and flashed my phone….
now the phone is working abnormally…. it gets swithched on…. and i can recive calls and sms but cannot view the…. it connects to the pc perfectly also…
also…where can i get the CDA pack which is menstioned in the FLASHING USING XS++ tutorial…. its been said that if you are changing the file system u need a pack some customization file….. pls help….. i am very sad
@Sreekanth Sundar
lol..
be careful now..
re flash…both main and fs…
and for cda…search on 4shared…acc to your region
like
w580 cda india
@bhuvan,
If he just interchanged the FS and main, how come the phone is switching on?
@Shrikant Sundar,
You cannot view the what, dude? If it’s getting connected to the PC with no problems, flash only the MAIN and see if the phone is working. If not, only then flash the FS. Also, I don’t think that you have flashed the FS in place of main, the phone would not have turned on in that case.
the phone is turning on…..while booting it asks for menu select(NORMAL MODE/FLIGHT MODE) but after that the phone halts to load…. but i can get the shut down menu and also i can recive calls toooo….. but cannot acess the main menu and no buttons will work…
also when i type 112,911 emergency call symbol comes…..
As bhuvan said, reflash MAIN and FS……
I think the files you have are corrupt. Download from somewhere else this time.
@hellboy
thank u dude…. and please suggest me an alternate site for getting the firmware and the file system…..
i am having a w850i having some 3logy version……
is any other phone’s version suitable for my phone…. means some other walkman version?
@hellboy
well errors must be coming
!
@hellboy
and yea…he is just noob…so i guess…anything may happen
lol!
when he flashed fs in place of main…may b…it was shows that phone is getting flashed but may b it did not!
@Sreekanth Sundar
reflash properly
use jdflasher this time!
get different firmwares
Sreekanth Sundar
walkamn 3logy?
damn…its all new with u!!!
get from 4shared
guyss……help its very urgent…
i tried to flash the phone… but its not working properly…. so i gave my phone to sony ericsson service centre… now they refreshed the phone OS
AND the PROBLEM is now its asking FOR COUNTRY CODE…… i dont know what the hell it is…. they told that i have to purchase the code with RS 1500… pls help me….. is that true….? and is there any way to crack it… they are telling that GSM sims wont work in the phone… PLS HELP ME….. i am totally confused
I have K550i (CID: 51)and have trouble when somehow he show me white screen when unpluging him, now he is unworking….
Now i began flash and somehow failed…
log:
”
04:42:35| Header type: BABE
04:42:35| 455 flashblocks
04:42:35| Binary acknowledge failed with: 89
04:42:35| Failed
04:42:35| Binary acknowledge failed with: 68
04:42:35| Command: Error 0×68
04:42:35| Failed sending flashblock 1. Returnvalue 0xD0022D00
04:42:35| Finishing flash
04:42:36| Binary acknowledge failed with: 02
04:42:36| Failed
04:42:36| Failed
04:43:12| Error: Flashing failed
04:43:12| Disconnected… Unplug the phone
04:43:17| Shutting down…
”
Help me i cant torn on my phone!
[email protected]
Winzas
connect it back..
try again…
and post full log..
i have w580i..i have taken backup of GDFS..m using XS++ to install flash themes..can this void the warranty???
also i want to install walkman skins..i read from the tut that we can do it by uploading the skins to particular folder..jus wnt to know by doin this does it affect original settings..
pritesh
nope..
untill ur phone is branded one!
i did not back up my gdfs on sony ericsson w810i and theres a please wait sign when the phone is turned on
dezil, its ok don’t worry, just relfash the phone.
plz help me i lost my gdfs ..i dont put a backup
plz help plz
this is my mail [email protected]
what should i do?
lana
if u need to restore gdfs and u dont have the original backup then dont play with ur phone…take it to service center
no way out
whats the exact problem?
plz help me, i have k750i
20:50:39| XS++ v2.0 Ready !
20:50:39| Executed on Microsoft Windows XP
20:50:46|
20:50:46| Attempting to open the interface…
20:50:46|
20:50:46| Turn off phone
20:50:46| Hold ‘C’ button on phone and connect phone.
20:50:46| You have 30 seconds.
20:50:46|
20:50:49| Baseband ID: 8040
20:50:49| Hardware Platform: DB2010 Marita compact
20:50:49| Protocol Version: 3.1
20:50:49|
20:50:49| Sending db2010_cid00_prodid_p3l.bin…
20:50:49| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
20:50:49| This is a PRODUCTION_ID loader
20:50:49| Activating GDFS…
20:50:49| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K750)
20:50:49| …using GDFS name
20:50:49|
20:50:49| Profiling SEMC phone…
20:50:50| Baseband ID: DB2010
20:50:50| OTP CID: 49
20:50:50| EROM CID: 49
20:50:50| EROM Color: Red
20:50:50| IMEI: 35437701xxxxxx
20:50:50| Phone ID: K750
20:50:50| Network: EMEA_6
20:50:50| CDA: CDA102337/103 R3A
20:50:50| Firmware Version: R1DB001
20:50:50| EROM: n/a
20:50:50| Ready for operation!
20:54:21|
20:54:21| Sending db2010_cid49red_cs_r3a010.bin…
20:54:23| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
20:54:23| This is a CHIPSELECT loader
20:54:23| Activating loader…
20:54:23| Activating GDFS…
20:54:49| This loader is UNLOCKED
20:54:49| Sucess! CS-loader has been unlocked!
aman
dude follow the instructions again
u are pressing wrong button
Please help me!
My Z310i has a blank screen but i can call using this phone.
I think my phone gdfs & erom are broken.
I had try search for gdfs but i can’t find it.
this is the report from XS++v3.2:
22:20:32| XS++ v3.2 Dev1 (Crystal) Ready !
22:20:32| Executed on Microsoft Windows XP
22:20:41|
22:21:21| Attempting to open the interface…
22:21:21|
22:21:21| TURN OFF PHONE!
22:21:21| Hold ‘C’ button on phone and connect phone NOW.
22:21:21| You have 30 seconds…
22:21:21|
22:21:28| Baseband ID: D000
22:21:28| Protocol Version: 3.1
22:21:28| Warning: IMEI name does not match GDFS name (IMEI:Z310 GDFS:n/a)
22:21:28| …using IMEI name
22:21:28|
22:21:28| Profiling SEMC phone…
22:21:28| Platform: PNX5230
22:21:28| OTP CID: 51
22:21:28| EROM CID: 53
22:21:28| EROM Color: Red
22:21:28| IMEI: 35905801xxxxxx
22:21:28| Phone ID: Z310
22:21:28| Region: n/a
22:21:28| CDA: n/a n/a
22:21:28| Firmware Version: n/a
22:21:28| EROM: n/a
22:21:28| Ready for operation!
22:22:14| Error: Server not found!
22:22:19| Error: Server not found!
22:22:30| Disconnected… Unplug the phone
22:22:34| Shutting down…
Please help me!!!
Thank you…
Regards,
Yuri Bhuana
Yuri Bhuana
use jdflasher
ur phone is cid:53
not supported by xs++
bhuvan
yes, i know that. but i have try to flash main, fs and custpack by using jdflasher. but why my phone still have a blank screen (the screen color is purple)
Please tell me, where i can find gdfs for z310 cid53 and how to flash the gdfs with cid53 using jdflasher???
Thank’s
Please tell me, where i can find gdfs and e-rom for z310 cid53 and how to flash the gdfs with cid53 using jdflasher???
Thank’s b4
Hey Akshayy…great site…helped me unlock K790 and W880…i’m trying to fix my cousin’s w810….seems the gdfs is a bit corrupted…phone turns on and everything seems fine but in a minute or so it turns off itself…the model is shown as model….XS and SEtool detects it but xs says the imei and GDFS show different names…he’s doesnt know much about phones so he didn’t make a GDFS backup of his phone…help!!!
oh…forgot to mention…i tried to flash the main and fs with ones that i downloaded from a 4shared folder i think but i keep getting an error…i wonder if i should download another set and try again? only thing is i have dial up and it’s painfully slow…hehe..thanks for any help..
Now i realize that the main and fs i’m using are CID 49 and the d#&m phone is CID 50….i think the flashing may work now??? if i get the right file? know where i can get them from?? registering at topse.ru is lots of headache..i’ve tried and keep failing a long time ago…i’ll try again to register…thanks in advance for any help…
Yuri Bhuana, you can’t flash some other phone gdfs into your phone. you should flash only your phone gdfs backup if you have.
Ravi,
Don’t know how to flash CID50, you should try reflashig with SEUS. or else SE service center can reflash phone for very cheap.
Hi, Akshayy, Please tell me, how to flash the gdfs with cid53 using jdflasher???
Thank’s b4
Hi, Akshayy, Please tell me, how to flash the gdfs & e-rom with cid53 using jdflasher???
Thank’s b4
Yuri Bhuana
both cant be done…in cid:53 phones yet!
Hi akshayy i have a doubt
my phone is not turning on and in xs++ it says .5x continuing something like that
now can i restore the gdfs using setool
in setool when i connect phone by cicking unlock/repair it says
cant read scrc unit
is my phone dead?/
how to bring back it to life //
plz help me urgent
no ack during gdfs_readvar !
Can’t read SCRC unit
What exactly is the problem
Aswin
post whole log here
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition – please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35901901334099 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can’t read SCRC unit
Elapsed:84 secs.
Elapsed:84 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590190133**99 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:8 secs.
This is the log when i try to write the gdfs using setool lite plz help me plz
i hav the gdfs backup file in .bin format
Now can i try to restore gdfs using the Cruiser suite If yes how to do that plz tell step by step
One more thing cruiser asks for gdfs files with .gdfs extension
Can .bin file can be used plz reply soon akshay and bhuvan
aswin
r u facing white screen???
tried reflashing?
or its red light?
aswin
cruiser site?
we talk about setool and xs++ only!
Thanks Bhuvan
No man nothing on the screen i think gdfs is not ok …bhuvan can u mail me at [email protected] i need online support yaar plz
Bhuvan k 539i doesnt have an IR so cant say red light blinking or not 🙁
aswin
dude if ir is not there then it should glow somehwre around ur c key or nack arrow key!
tried reflashing???
what is happening whn u are connecting ur phone to pc c key pressed?
When i connect using C key nothing seems happening
Bhuvan plz mail me plz i need support thats y
aswin
reconnect
also install gordons gate flash drivers
gt from filebase
I have flash drivers, the phone doesnt detect using the c key
How to restore gdfs using the JDflasher bhuvan
aswin
no gdfs related stuff on jdflasher!
Ohhh No then what to do now i donno
aswin
if u have cid:53 phone and there si no solution for u problem except gdfs restoring then no way!
My phone CID is 52 man its shown in the logs its not CID 53
aswin
the for gdfs stuff xs++ and setool are there
what do u want ?
aswin
no other software
only xs++, setool
i want to try other software to restore my GDFS may be that will help
hey aswin …me 2 facing da same problem…….
my phone is not starting….
i tried restoring da gdfs using setool…..it is saying da same as urs…..
anyone plz help…….
my model is W580…..
here is my log while i trying to write my GDFS…
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35373602122711 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:18 secs.
Praveen
wanna ask me then post whole thing
Hello my k550im doesn t start anymore ….
White screen !!!
Didn t make gdfs backup ….
Who can help me ???
lolo
reflash using xs++ or jdflasher if its cid53
Hello Akshayy
I have W610i . its shows every time ” insert sim “. i have tried all the sim available in Gujarat India . but it should not start. so i have decided to check it on XS++. i have raad your article on that & Decided to unlock it so i tried to back of its GDFS (its log is below) but failed after that the phone is total dead
10:45:41| XS++ v3.1 (Darwin) Ready !
10:45:41| Executed on Microsoft Windows XP
10:45:53|
10:45:53| Attempting to open the interface…
10:45:53|
10:45:53| TURN OFF PHONE!
10:45:53| Hold ‘C’ button on phone and connect phone NOW.
10:45:53| You have 30 seconds…
10:45:53|
10:45:57| Baseband ID: 9900
10:45:57| Protocol Version: 3.1
10:45:57| Phone name detected!
10:45:57|
10:45:57| Profiling SEMC phone…
10:45:57| Platform: DB2020
10:45:57| OTP CID: 51
10:45:57| EROM CID: 53
10:45:57| EROM Color: Red
10:45:57| IMEI: 35489401xxxxxx
10:45:57| Phone ID: W610
10:45:57| Region: C_ASIA
10:45:57| CDA: CDA102568/1 R2A
10:45:57| Firmware Version: R6BC002
10:45:57| EROM: R3A022
10:45:57| Ready for operation!
10:46:03| After making any changes with FSX
10:46:03| you must press the ‘Shutdown’ button
10:46:25| Sorry, your phone is NOT SUPPORTED
10:46:25| Error: Failed to send CSLoader!
10:46:25| FSX Shutdown!
10:46:27| Disconnected… Unplug the phone
10:46:31| Shutting down…
Please help me to start my phone
thanks
Got white screen on my W700i.
Dont have GDFS back up.
i have flashed it with xs++ after white screen but nothing happend.
no warranty it is two and half years old.
plz help me what to do?????
Narendra patel
setool do not support cid53 phones
discuss it on our forum
satyainder
try seus
hey i hve tried seus the phone is updated.
but white screen still exist.
plz help me out is there is no other way to get my working phone back???
even after update i tried to back up GDFS and it is done.
is EROM is corrupted or my display screen is faulty???
satyainder
is phone functioning???
i mean try operating with without looking at screen by remembering the functions
i guess its display problem only!
Hello
Bhuvan
What should I have to do for CID 53?
same problem here fore gdfs error that is fatal .. can any1 help me .. tanks in advnce
Narendra patel
no gdfs related stuff fro cid53 phones
i have a w850i and it was not working it would cut on but the screen would blink white…so i read that you needed to update it so i did…now its cid 53 and it seldom cuts on the majority of the time the screen still blinks but everyonce in a while it cuts on but has numerous errors like the screen rolls or the icons are out of place or something like that… what do you think could be wrong with my w850 and how can i fix it…could it be the file system or the gdfs or something?
smiley989
no!
gdfs is not something so usual
reflash using jdflasher
well what should i do
smiley989
like i said
reflash
use seus
i reflash using seus and the screen still blinks white does that mean it could be a technical issue as in the screen needs to be replaced
smiley989
yea…if functions are working fine
then thats the thing!
screen is not fine
whenever i’m going to turn on my W350i,it shows something black screen & i couldnt turn it on for a few days.i think its may be a problem of GDFS but sorry to say i didnt backup my GDFS when it was OK.in this case u told that to contact with u in ur tutorial.plzzz help!!!
CJ
gdfs cant be backed up in w350!
reflash fs
and if still does not works then reflash main also
I have a w850i with wsod. No original backup of GDFS =/ I’ve fully reflashed and added customs again, still white screening.
The only thing I haven’t tried is the gdfs, but I don’t know how to go about doing this without my original version? 🙁
Please help me. I miss my phone =(
Phone is now showing me all the signs of a complete gdfs meltdown now… It refuses to switch on at all.
Help? 🙁
I do however have a copy of the gdfs when it was wsod. But I can’t write that now because the phone isn’t even connecting with setool 🙁
Hi Akshay,
When I was trying to unlock my W810i and when I was doing the backup of the GDFS using SeTool_2_Lite_1.11, the folder REST was not created with the backup file.
After that my phone doesn’t turn on.
I’m afraid of my GDFS was deleted.
Could you help me please?
The log generated is below:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition – please visit http://www.setool.net and buy FULL.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906400590375 CERT:RED
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
unsupported combination.
Elapsed:12 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906400590375 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS “READY”
Trying to launch embedded bootloader…
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
can’t open file “C:\Documents and Settings\caseol\Desktop\SeTool_2_Lite_1.11\setool2lite_db2020\rest\R4DB005_CXC1250316_GENERIC_HN”
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:102 secs.
Carlos André
try reflashing main and fs
HELP ME!!!!
I’m using my friends sony w850i..
i tried to change something using setool2lite, then something went wrong which is
the phone cannot working, it cant turn on…
when i used xs++ , it shows something like this,
11:49:38| Baseband ID: 9900
11:49:38| Protocol Version: 3.1
11:49:38| Phone name detected!
11:49:38|
11:49:38| Profiling SEMC phone…
11:49:38| Platform: DB2020
11:49:38| OTP CID: 49
11:49:38| EROM CID: 52
11:49:38| EROM Color: Red
11:49:38| IMEI: 35282601xxxxxx
11:49:38| Phone ID: W850
11:49:38| Region: C_ASIA
11:49:38| CDA: CDA102677/57 R3A
11:49:38| Firmware Version: R1KG001
11:49:38| EROM: R3A016
11:49:38| Ready for operation!
11:50:03|
11:50:03| Sending db2020_cid01_prodid_p3j.bin…
11:50:03| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
11:50:03| This is a PRODUCTION_ID loader
11:50:03|
11:50:03| Sending db2020_mem_patcher_cid52_r2a006.bin…
11:50:03| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
11:50:03| This is a MEM_PATCHER loader
11:50:03|
11:50:03| Sending db2020_red52_cs_r3a009.bin…
11:50:05| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
11:50:05| This is a CHIPSELECT loader
11:50:05| Activating loader…
11:50:05| Activating GDFS…
everytime i try to restore GDFS, it stops at “ACTIVATING GDFS”
so, what am i gonna do? please!!!!! help me!!! please!!!!!!!!
crying lady
why are u tryng to restore gdfs???
its not something meant to be played with!!!!
reflash the firmware
use jdflasher!
my phone wont start/ ‘ON’ after i put somethng .vkp file using setool which is patching, after tht, turn off and when i wanted to turn on, it cant! so i restore the gdfs… i dont know.. help me..
where can i get the firmware for W850i,
how to reflash it… im blur.. ..
? please…please…
i back up gdfs W850i using xs++..
1> how to flash using firmware
2> where can i get the firmware
3> How to restore GDFS using xs++
pleaseeeeeee…. help me…..
crying lady
dont just play wth ur gdfs!
anyways
reflash main would probably solve ur problem!!!!
look at xs++ flashing guide
download firmware from 4shared or topsony
THANX BHUVAN!! IT WORKS! THANK U SO MUCH!!
hi i think i have the red light problem on w850i cid 49 red
crying lady
nice to see u happy!
voden
look at setool redlight blinking guide!
i have the w850 cs loader refused to start gdfs services error is 29. should i flash with erom cid 49
voden
is phone getting connected with ‘c’ key???
yea then reflash main and fs!
nope my phone only connects with the 2+5 combo…………..any ideas?…thanks for the reply
i’d really appreciate it if you would help me
voden
man some trouble!
jump to our forum and discuss there
Hi Bhuvan,
I have read your replies here, and i think you are the only person who could help me out. I have a w810i, few days back i got a problem of WSOD. I flashed it using XS++ by Loading MAIN and FS but its halts at
Activating Loader…
Activating Gdfs…
Any Solution bro???
Danish
use jdflasher!
look in jdflasher flashing guide
I have a w900i.. it suddenly had the wsod.. so i tried flashing with xs++ and now i get ‘configuration error’ .. if i leave the phone idle for few moments the wsod appears.. plz help me!! i din backup my gdfs..
Vinz
upload right custpack knows as cda also
search at 4shared
upload files to
tpa/preset/custom
my z750a at&t sony ericsson phone gdfs file was corrupted ,i did’nt backup gdfs in past please help me
thanks in advance
i have a w880i and i cant backup gdfs please tell me that there is hope for my phone!
Unknowingly i have written some other K550i GDFS (downloaded from internet) now WSOD problem is very frequent, but fortunately i have backup of old GDFS, will this fix my problem ?
Here are logs
09:03:29| Profiling SEMC phone…
09:03:29| Platform: DB2020
09:03:29| OTP CID: 51
09:03:29| EROM CID: 52
09:03:29| EROM Color: Red
09:03:29| IMEI: 35489301xxxxxx
09:03:29| Phone ID: K550
09:03:29| Region: RUSSIA
09:03:29| CDA: CDA102568/1 R2A
09:03:29| Firmware Version: R8BA024
09:03:29| EROM: R3A016
09:03:29| Ready for operation!
Firmwares used.
Main – k550_r8ba024_main_generic_li_red52.mbn
FS – k550_r8ba024_fs_c_asia_red52.fbn (Also used Russia but didn’t work)
Files – In built with XS++ K800 CDA102568/1
Each time i reflash it works for temporary fix for couple of minutes only, sometimes it keeps blinking white and black.
Any help is highly appreciated.
Frequent WSOD Problem after writing wrong GDFS, but i have backup of my original GDFS, Will this fix my issue permanently, Is there any Hardware damage ?
Here are logs
09:03:29| Profiling SEMC phone…
09:03:29| Platform: DB2020
09:03:29| OTP CID: 51
09:03:29| EROM CID: 52
09:03:29| EROM Color: Red
09:03:29| IMEI: 35489301xxxxxx
09:03:29| Phone ID: K550
09:03:29| Region: RUSSIA
09:03:29| CDA: CDA102568/1 R2A
09:03:29| Firmware Version: R8BA024
09:03:29| EROM: R3A016
09:03:29| Ready for operation!
Firmwares used.
Main – k550_r8ba024_main_generic_li_red52.mbn
FS – k550_r8ba024_fs_c_asia_red52.fbn (Also used Russia but didn’t work)
Files – In built with XS++ K800 CDA102568/1
Each time i reflash it works for temporary fix for couple of minutes only, sometimes it keeps blinking white and black.
Any help is highly appreciated.
Hi,tried to flash and unlock cid53 k530i to w660 using far manager, but now all i can see when turn the phone on is se logo, than the phone turns off and than every 20 seconds (abt) it is showing blank screen for a second or so.
this is what i am geting from xs++
21:09:15| Hold ‘C’ button on phone and connect phone NOW.
21:09:15| You have 30 seconds…
21:09:15|
21:09:23| Baseband ID: 9900
21:09:23| Protocol Version: 3.1
21:09:23| Warning: IMEI name does not match GDFS name (IMEI:K530 GDFS:K700)
21:09:23| …using IMEI name
21:09:23|
21:09:23| Profiling SEMC phone…
21:09:23| Platform: DB2020
21:09:23| OTP CID: 51
21:09:23| EROM CID: 53
21:09:23| EROM Color: Red
21:09:23| IMEI: 35901901xxxxxx
21:09:23| Phone ID: K530
21:09:23| Region: T_MOB_INT_B
21:09:23| CDA: CDA102823/49 R6A
21:09:23| Firmware Version: R8BB001
21:09:23| EROM: R3A022
21:09:23| Ready for operation!
any ideas? looks like gdfs is gone (no backup because cid 53). what would be your next move ? is it service or still there are some other options left…
PLEASE HELP ME !
when I try to make a call from my K850i, it stuck and not responed then I removed battery and power on again, but it not boot. phone vibrates, blue ring and keypad light up no display. after few seconds, vibrates again and key.blue lightup. this is repeat until remove battery. BROD?
I flashed my K850 several times with A2uploader and SEUS but problem still same. also tried R1FA035 and R1FA037 firmwares but no any changes. I suspect may be GDFS damage?
Please help me to revive my phone.
hi bhuvan,, thank you so much.. I have fix the same problem with crying lady, but my problem now is my screen color is inverted(negative color) how to fix it?
hey dude, my phone se c905 won’t start. i have already debranded it and now i was trying to unlock it but then failed and now it just doesn’t start. there is also a red light flashing on the side when i put charging plug in the phone.
help please!
Hi! I get White Screen Of Death on my SE W810i but I don’t have any backup of my GDFS. Is there still a chance for my phone? need your help. Thank you very much.
Yes, just reflash main + fs
thanks a lot! done it successfully.
i wasn’t able to find the exact MS for my phone. i just used a generic.
again, thanks a lot! it was a big help. 🙂
hey guy,
i failed on the unlock with a k770i, now its saying contact provider! so silly me went an updated through SEUS and its now erom cid is 53! does this mean that its unlockable? and is it back to the normal state so will it take the orignal simcard?
oh i have a back up of orginal GDFS, can i use this at all? i just want fone back working, i dont care about the unlock lol, either reply here or email me, would be a great help lad
in fact i have read but what i want is to tell me how can i flash agdf phone and comes to normal
Bro i lost my G900 Gdfs backup file..My phone dead 4ever..Is there any chance get a new backup file?
Please guide me…
i dont copy gfds file :S and try to update and it fails … can someone send db2001 cid 53 gfds ? for g900 my email is [email protected]
hi Akshay
please help me, my P1i wont start, the keys and screen is lit, but nothing is showing, i guess its the white screen of death, what should i do? i did not back-up my GDFS, please help me
Tristan
well ur phone is db2001, it has no flashing support, but u can give a try for seus! us it for reflashing, i guess that will solve it!
@bhuvan
thanks, but i tried it several times with SEUS, but it only says your firmware is up to date, perhaps you know how?
Tristan
look out for omnius then, it can flash ur phone but i havent tried it, but it can flash, n very easy tool
bhuvan
thanks man
Tristan
😉
can you help please my w580 wont turn on, but the red light does.
Hi, can you please help me with problem described in this topics:
http://www.topsony.com/forum/far-manager-f31/k800i-totaly-broken-t22890.html
http://www.esato.com/board/viewtopic.php?topic=199893
I would really appreciate your help. Thanks in advance.
Hi Akshay,
“In case you have not made a backup of gdfs then there is no way to fix the phone , In such a case Contact Me.” Can you still help with this on an old K800i?
THhanks
hi, this is rahul mehta. I haven’t taken backup of gdfs ever. And now my phone is dead and need to be updated with gdfs. plz help. asap.
thanx
Hey sir i have a big problem here and i do need your help sir.. my first problem was the application and game is “operation failed” then i tried to do what is in your tutorial and my phone was ruin.. when i turn it on the screen goes white and the camera keeps on flashing
sir i do really need your help, badly my phone is k810i
I need some help. My phone didnt want to start, just flashed the little red LED 6 times. I have Flashed it with main and Fs for a CID:49 RED. It is a K800i.
I keep getting the error CSloader refused to start GDFS services, error is :29
failed, that is fatal.
How can I fix this? And I dont have a GDFS backup file, because it has been giving this error from the beginning.
HELP!
i’ve backup data gdfs k550
and then i try to crossflashing to w610
with k550 cid 53
but i got error theres no signal and screen became with what should i do?
please help me
sir…….i have sony ericsson k800i mobile which has older version of software ….which i have updated to new version but the my phone having a problem …that the its bluetooth is turning on its gives the message like ….the bluetooth is turn on but it not show any symbol and even the off option in the menu ….bcoz of this problem i fashed my mobile twice…but before flashing my phone ..bluetooth is working ……please help me out….